2nd gen diesel scan gauge X Codes
  1. Welcome to Chevy Cruze Forum : Chevrolet Cruze Forums – General discussion forum for Chevy Cruze

    Welcome to Chevy Cruze Forum : Chevrolet Cruze Forums - a website dedicated to all things Chevy Cruze.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Chevy Cruze Forum : Chevrolet Cruze Forums today!
     
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
Like Tree3Likes

Thread: 2nd gen diesel scan gauge X Codes

  1. #1
    2nd Gear
    Join Date
    Feb 2013
    Posts
    418

    2nd gen diesel scan gauge X Codes

    I am trying to see if anyone knows of any Scangauge Xgauge parameters we can program in?

    The ones listed on their website for "any 2014+ Cruze diesel" do not work. I am figuring they haven't updated it since the 2nd gen has come out.

    Here's a link to the ones I couldn't get to work.

    I would absolutely love to be able to monitor EGTs and DPF soot load.

    Before anyone suggests torque yes I have torque but do not want a second phone on my dash to use it.

    I use my primary phone with my Valentine V1 already.

    Thanks.

    https://www.scangauge.com/support/x-gauge-commands/gm/
    2018 Cruze RS Hatch Diesel A9

    Factory retrofits: 120v inverter.
    Future retrofits: Auto HVAC, auto up driver window, turn signal mirrors, auto dimming interior mirror.

    1st Gen: How to make your ECO take 15.6 Gallons of fuel properly:
    Hidden Content

    Hidden Content

    Hidden Content

  2. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

  3. #2
    Driver's Ed
    Join Date
    Mar 2017
    Posts
    39
    I bought a scan gauge for my 2017 Cruze. I also have a 2016 Gmc Canyon duramax. Both vehicles use the same engine computers, i punched in some of the codes from the xgauge info for the Canyon Duramax and they do work with the Cruze. I did not finish the set up as a decided to use a Edge Insite instead of the Scan gauge do to its design and look. I was hoping by now Scan Gauge would have figured the setup for the 2017 and up Cruze diesel by now.

    Sent from my SM-G955U using Tapatalk

  4. #3
    Drag Racing Champion
    Join Date
    Nov 2017
    Posts
    1,722
    Does the edge do the same things as torque?

    Torque is a nice app with the most gauges to offer but it sure does have a lot of incorrect pids. That don't allow the gauges to work.

    I've been able to find the correct pids for oil pressure, oil temp, and trans temp. But that's about it.

    Been trying to find knock retard but all I've found so far is a spreadsheet for mazda.
    Last edited by snowwy66; 07-04-2018 at 10:38 PM.

  5. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

  6. #4
    Drag Racing Champion
    Join Date
    Nov 2017
    Posts
    1,722
    They don't have cruze on their sight. Guess that answers that.

  7. #5
    4th Gear LiveTrash's Avatar
    Join Date
    May 2015
    Location
    Ontario, Canada
    Posts
    704
    I was the one who initially contacted ScanGauge for the implementation of the XGauges for the 1st Gen Diesel. My contact there was James DeLong. Someone with a Gen2 may be able to get in contact with him if he still works there and work with him the same way I did to get it working with the 2nd Gen Diesel. He was more than willing to put in the effort to get it functional.

    Good luck!
    BRUZER
    2014 Chevy Cruze Diesel | Crystal Red Tint Coat /w Cocoa Leather Interior | Safety and Convenience Package

    Modifications
    20% Window Tint All Around
    OEM Fog Light Install
    Hidden Content /w Hidden Content
    Hidden Content
    Hidden Content
    Hidden Content

    Equipment
    Hidden Content
    Hidden Content

  8. #6
    2nd Gear
    Join Date
    Feb 2013
    Posts
    418
    Quote Originally Posted by snowwy66 View Post
    Does the edge do the same things as torque?

    Torque is a nice app with the most gauges to offer but it sure does have a lot of incorrect pids. That don't allow the gauges to work.

    I've been able to find the correct pids for oil pressure, oil temp, and trans temp. But that's about it.

    Been trying to find knock retard but all I've found so far is a spreadsheet for mazda.
    KR on a diesel Cruze?



    Quote Originally Posted by LiveTrash View Post
    I was the one who initially contacted ScanGauge for the implementation of the XGauges for the 1st Gen Diesel. My contact there was James DeLong. Someone with a Gen2 may be able to get in contact with him if he still works there and work with him the same way I did to get it working with the 2nd Gen Diesel. He was more than willing to put in the effort to get it functional.

    Good luck!

    I will give it a shot. I really want to keep the stand alone Scangauge for monitoring a few things because I already have my phone display tied up running YaV1

    Thanks.
    2018 Cruze RS Hatch Diesel A9

    Factory retrofits: 120v inverter.
    Future retrofits: Auto HVAC, auto up driver window, turn signal mirrors, auto dimming interior mirror.

    1st Gen: How to make your ECO take 15.6 Gallons of fuel properly:
    Hidden Content

    Hidden Content

    Hidden Content

  9. #7
    Drag Racing Champion
    Join Date
    Nov 2017
    Posts
    1,722
    KR in general. Just because this is a diesel post. We're still talking apps. 🙂

  10. #8
    2nd Gear
    Join Date
    Feb 2013
    Posts
    418
    Welp I got the Scangauge today. Programmed in some gauges they list for 2014+ Cruze diesels.

    DPF soot load doesn't work.

    Current gear doesn't work.

    Regen status doesn't work.

    EGT1 shows some data. I'm not convinced yet that it actually works correctly.

    I have emailed them and am waiting to hear what they say.
    2018 Cruze RS Hatch Diesel A9

    Factory retrofits: 120v inverter.
    Future retrofits: Auto HVAC, auto up driver window, turn signal mirrors, auto dimming interior mirror.

    1st Gen: How to make your ECO take 15.6 Gallons of fuel properly:
    Hidden Content

    Hidden Content

    Hidden Content

  11. #9
    4th Gear LiveTrash's Avatar
    Join Date
    May 2015
    Location
    Ontario, Canada
    Posts
    704
    Quote Originally Posted by firehawk618 View Post
    Welp I got the Scangauge today. Programmed in some gauges they list for 2014+ Cruze diesels.

    DPF soot load doesn't work.

    Current gear doesn't work.

    Regen status doesn't work.

    EGT1 shows some data. I'm not convinced yet that it actually works correctly.

    I have emailed them and am waiting to hear what they say.
    I would have waited to hear back from them before purchasing one. It's possible it will need a firmware update before you can apply the codes to it.
    BRUZER
    2014 Chevy Cruze Diesel | Crystal Red Tint Coat /w Cocoa Leather Interior | Safety and Convenience Package

    Modifications
    20% Window Tint All Around
    OEM Fog Light Install
    Hidden Content /w Hidden Content
    Hidden Content
    Hidden Content
    Hidden Content

    Equipment
    Hidden Content
    Hidden Content

  12. #10
    2nd Gear
    Join Date
    Feb 2013
    Posts
    418
    Quote Originally Posted by LiveTrash View Post
    I would have waited to hear back from them before purchasing one. It's possible it will need a firmware update before you can apply the codes to it.
    Well I did put in the cruze code when checking out and figured since this was straight from the manufacturer that it would have the latest firmware.

    EDIT: I checked and my firmware is higher than the 4.42 which they say is Required. I would have to assume at this point that any firmware higher than 4.42 is good.
    Last edited by firehawk618; 07-10-2018 at 04:45 AM.
    2018 Cruze RS Hatch Diesel A9

    Factory retrofits: 120v inverter.
    Future retrofits: Auto HVAC, auto up driver window, turn signal mirrors, auto dimming interior mirror.

    1st Gen: How to make your ECO take 15.6 Gallons of fuel properly:
    Hidden Content

    Hidden Content

    Hidden Content

  13. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Quick Reply Quick Reply

Register Now

Please select your insurance company (Optional)

Similar Threads

  1. Torque pro/ scan gauge
    By sledstorm1 in forum Gen2 Diesel General Discussion
    Replies: 2
    Last Post: 06-13-2017, 09:13 PM
  2. 2017 2nd Gen Diesel Pricing Revealed
    By CruzeDan in forum Gen2 Diesel General Discussion
    Replies: 30
    Last Post: 12-10-2016, 11:59 AM
  3. Can Scan Gauge II cause CEL?
    By Barefeet in forum Gen1 Diesel General Discussion
    Replies: 11
    Last Post: 06-06-2016, 06:23 PM
  4. 2nd Gen Cruze EPA Ratings Better Than 1st Gen Eco
    By Blue Angel in forum Fuel Economy
    Replies: 35
    Last Post: 04-30-2016, 12:58 AM
  5. What Scan Gauge 2 Settings and Gauges ate you running?
    By GlennGlenn in forum Gen1 Diesel General Discussion
    Replies: 13
    Last Post: 02-04-2016, 12:23 PM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.2