Cruzen2.0 - Part 2 (Gradual Mods, Upgrades, and Repairs) - Page 11
  1. Welcome to Chevy Cruze Forum : Chevrolet Cruze Forums – General discussion forum for Chevy Cruze

    Welcome to Chevy Cruze Forum : Chevrolet Cruze Forums - a website dedicated to all things Chevy Cruze.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Chevy Cruze Forum : Chevrolet Cruze Forums today!
     
+ Reply to Thread
Page 11 of 12 FirstFirst ... 9 10 11 12 LastLast
Results 101 to 110 of 120
Like Tree22Likes

Thread: Cruzen2.0 - Part 2 (Gradual Mods, Upgrades, and Repairs)

  1. #101
    Touring Champion
    MP81's Avatar
    Join Date
    Jul 2015
    Location
    Washington Township, MI
    Posts
    3,627
    Nothing worse than crappy halos - problem is there are a lot of them out there...
    2014 Chevy Cruze Diesel - MSR 013 17" wheels, Black Bowties, UR Rear Lower Bar
    Hidden Content
    2007 Chevy Cobalt LT Coupe - M62 w/ 2.9" pulley, Header/Downpipe/Exhaust, FE5 Struts/Shocks/Control Arms/Front Swaybar, SSC Springs, Powell Hardcore Rear Swaybar, MSR 045 18" wheels w/ Direzza ZIIs, G85 Recaros + much more
    Hidden Content
    2017 Chevy Volt LT - Black Bowties
    Hidden Content
    1981 Chevy Camaro Z28 - Zapco Amp & Pre-Amp/Equilizer, Kenwood Tape Deck, Pyle 8" Woofers & SEAS 4.5" Mids in Deck, JVC Ribbon Tweeters in Doors, Ceramic Coated Longtubes, 2.5" Pypes Stainless Exhaust, Bilstein B6 Shocks, GW U/L Control Arms, Hotchkis Springs & Sway Bars, DD HDX Cluster
    Hidden Content

  2. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

  3. #102
    TheCruzen is offline [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    201
    Headlight project done, will post pics later.

    Ran the car on a chassis dyno earlier, made 270hp and 347tq with the cutout open, did almost that much with it closed but opening it moved peak torque down 400rpm or so
    Somewhere an Equinox is missing its "N".....

  4. #103
    TheCruzen is offline [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    201
    Ran the car down the drag strip yesterday

    1st pass was 15.151 @101
    2nd pass was 14.902 @98
    Stock Verano runs 16.3 @89

    Could have done better but I didnt want to break the car.
    HatchLifeRS likes this.
    Somewhere an Equinox is missing its "N".....

  5. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

  6. #104
    5th Gear
    Taxman's Avatar
    Join Date
    Aug 2017
    Location
    Olivet MI USA
    Posts
    992
    100+mph is pretty good, especially with a 15+ second launch.
    Carp&Drivel
    got a 2013 down the 1/4 mile in 15.2, driving it like GM owns it.
    Seems like all their acceleration and braking numbers in the Buick are almost as good as a tuned 2950lb LE2 automatic sedan would do.

    Curb weight: 3483 lb
    C/D TEST RESULTS:
    Zero to 60 mph: 6.4 sec
    Zero to 100 mph: 15.8 sec
    Zero to 130 mph: 29.2 sec
    Street start, 5-60 mph: 7.2 sec
    Standing ¼-mile: 15.2 sec @ 98 mph
    Top speed (governor limited): 130 mph
    Braking, 70-0 mph: 178 ft
    Roadholding, 300-ft-dia skidpad*: 0.84 g
    *Stability Control limited
    Last edited by Taxman; 06-09-2019 at 03:58 PM.
    2017 Cruze LT RS
    2016 Cruze LT with Sun&Sound

  7. #105
    Touring Champion
    MP81's Avatar
    Join Date
    Jul 2015
    Location
    Washington Township, MI
    Posts
    3,627
    With those trap speeds (and your dyno figures), you should be deep into the 13s, assuming you can hook, which it sounds like is probably an issue.

    For reference, my Cobalt has run a best of 14.10 back when I had 195/60R15 all-seasons that didn't even remotely hook. I haven't had successful runs since I've had the ZIIs, but high-13s with an actual launch should be doable - or at least in the past it probably was.
    HatchLifeRS likes this.
    2014 Chevy Cruze Diesel - MSR 013 17" wheels, Black Bowties, UR Rear Lower Bar
    Hidden Content
    2007 Chevy Cobalt LT Coupe - M62 w/ 2.9" pulley, Header/Downpipe/Exhaust, FE5 Struts/Shocks/Control Arms/Front Swaybar, SSC Springs, Powell Hardcore Rear Swaybar, MSR 045 18" wheels w/ Direzza ZIIs, G85 Recaros + much more
    Hidden Content
    2017 Chevy Volt LT - Black Bowties
    Hidden Content
    1981 Chevy Camaro Z28 - Zapco Amp & Pre-Amp/Equilizer, Kenwood Tape Deck, Pyle 8" Woofers & SEAS 4.5" Mids in Deck, JVC Ribbon Tweeters in Doors, Ceramic Coated Longtubes, 2.5" Pypes Stainless Exhaust, Bilstein B6 Shocks, GW U/L Control Arms, Hotchkis Springs & Sway Bars, DD HDX Cluster
    Hidden Content

  8. #106
    TheCruzen is offline [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    201
    I didnt beat on the car, I still have to get home after all. I could have done a no-lift-shift from 1-2 but I'm pretty sure that would break something. I will post the time slips when I get home so you can see just how gentle I drove it.
    Somewhere an Equinox is missing its "N".....

  9. #107
    TheCruzen is offline [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    201
    Somewhere an Equinox is missing its "N".....

  10. #108
    Touring Champion
    MP81's Avatar
    Join Date
    Jul 2015
    Location
    Washington Township, MI
    Posts
    3,627
    I like how that turned out.
    2014 Chevy Cruze Diesel - MSR 013 17" wheels, Black Bowties, UR Rear Lower Bar
    Hidden Content
    2007 Chevy Cobalt LT Coupe - M62 w/ 2.9" pulley, Header/Downpipe/Exhaust, FE5 Struts/Shocks/Control Arms/Front Swaybar, SSC Springs, Powell Hardcore Rear Swaybar, MSR 045 18" wheels w/ Direzza ZIIs, G85 Recaros + much more
    Hidden Content
    2017 Chevy Volt LT - Black Bowties
    Hidden Content
    1981 Chevy Camaro Z28 - Zapco Amp & Pre-Amp/Equilizer, Kenwood Tape Deck, Pyle 8" Woofers & SEAS 4.5" Mids in Deck, JVC Ribbon Tweeters in Doors, Ceramic Coated Longtubes, 2.5" Pypes Stainless Exhaust, Bilstein B6 Shocks, GW U/L Control Arms, Hotchkis Springs & Sway Bars, DD HDX Cluster
    Hidden Content

  11. #109
    TheCruzen is offline [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    201
    @MP81 Don't look too close...
    Somewhere an Equinox is missing its "N".....

  12. #110
    TheCruzen is offline [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    201
    20190608_115350.jpg 20190608_142615.jpg

    Only did the 2 runs and probably could have gotten better results if I had continued

    (don't know why but these pics keep uploading sideways)
    Somewhere an Equinox is missing its "N".....

  13. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

+ Reply to Thread
Page 11 of 12 FirstFirst ... 9 10 11 12 LastLast

Quick Reply Quick Reply

Register Now

Please select your insurance company (Optional)

Similar Threads

  1. Building The Cruzen2.0
    By TheCruzen in forum Cruze Owner Projects
    Replies: 210
    Last Post: 12-17-2018, 07:55 AM
  2. Cruzen2.0 - Part 1 (Initial Build)
    By TheCruzen in forum Cruze Owner Projects
    Replies: 4
    Last Post: 12-14-2018, 08:38 AM
  3. New Cruze owner, welcoming adivce/tips for mods and upgrades
    By jms211 in forum CruzeTalk New Member Introductions
    Replies: 1
    Last Post: 03-31-2016, 04:12 AM
  4. Went in for exhaust repairs, and they give us a loaner...but
    By DJSW in forum Gen1 Diesel General Discussion
    Replies: 10
    Last Post: 11-01-2014, 08:18 PM
  5. Good Useful Link for Service and Repairs
    By springer64 in forum General Discussion
    Replies: 2
    Last Post: 06-01-2013, 07:58 PM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.2