Cruzen2.0 - Part 2 (Gradual Mods, Upgrades, and Repairs) - Page 7
  1. Welcome to Chevy Cruze Forum : Chevrolet Cruze Forums – General discussion forum for Chevy Cruze

    Welcome to Chevy Cruze Forum : Chevrolet Cruze Forums - a website dedicated to all things Chevy Cruze.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Chevy Cruze Forum : Chevrolet Cruze Forums today!
     
+ Reply to Thread
Page 7 of 8 FirstFirst ... 5 6 7 8 LastLast
Results 61 to 70 of 80
Like Tree14Likes

Thread: Cruzen2.0 - Part 2 (Gradual Mods, Upgrades, and Repairs)

  1. #61
    Formula One Champion
    Blasirl's Avatar
    Join Date
    Mar 2015
    Location
    Wisconsin
    Posts
    5,303
    I was assuming your labor with no shop markup, but I hear ya.
    Hidden Content "Don't just drive CRUZE!" ༼∵༽ ༼⍨༽ ༼⍢༽ ༼⍤༽

    Hidden Content

    Hidden Content (Hidden Content , Tinted Windows, Husky Floor Liners, shark fin, integral dash cam,Hidden Content , splash guards, Z-Spec Grille, Fogs, Depo smoked turn signals w/amber Diode Dynamics LEDs, Hidden Content UR Rear upper Strut Bar, UR Front Upper Strut Bar) MOTM JAN17 AUG17 AUG18

  2. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

  3. #62
    TheCruzen is online now [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    173
    BNR AutoCal and short shifter linkage arrived today.
    Attached Images Attached Images
    Last edited by TheCruzen; 04-11-2019 at 01:19 PM.
    Somewhere an Equinox is missing its "N".....

  4. #63
    TheCruzen is online now [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    173
    New wheels and something else...

    20190412_114800[1].jpg

    20190412_102020.jpg

    Wheels are 18x8.5 from a 2017 malibu (49 offset +5mm spacer)
    Tires are 245/45/r18

    BNR Tune has taken the car from Quick to Brutal!

    Waiting on stage 3 clutch to arrive, stock one seems to have stopped ratcheting properly as the f40 clutches are want to do.

    And yes, I may someday get a replacement hood. Not right now though.
    Last edited by TheCruzen; 04-13-2019 at 01:50 AM.
    Blasirl likes this.
    Somewhere an Equinox is missing its "N".....

  5. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

  6. #64
    TheCruzen is online now [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    173
    Short shifter installed today... And its really short.
    Somewhere an Equinox is missing its "N".....

  7. #65
    Formula One Champion
    Blasirl's Avatar
    Join Date
    Mar 2015
    Location
    Wisconsin
    Posts
    5,303
    Quote Originally Posted by TheCruzen View Post
    New wheels and something else...

    BNR Tune has taken the car from Quick to Brutal!
    I can't wait to see this thing in person...

    Quote Originally Posted by TheCruzen View Post

    20190412_114800[1].jpg

    And yes, I may someday get a replacement hood. Not right now though.
    I was thinking that exact thing as I looked at the picture. LOL
    Hidden Content "Don't just drive CRUZE!" ༼∵༽ ༼⍨༽ ༼⍢༽ ༼⍤༽

    Hidden Content

    Hidden Content (Hidden Content , Tinted Windows, Husky Floor Liners, shark fin, integral dash cam,Hidden Content , splash guards, Z-Spec Grille, Fogs, Depo smoked turn signals w/amber Diode Dynamics LEDs, Hidden Content UR Rear upper Strut Bar, UR Front Upper Strut Bar) MOTM JAN17 AUG17 AUG18

  8. #66
    TheCruzen is online now [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    173
    The F40 clutch is known to be a problem, there is a racheting element in it that will get stuck or skip causing it to slip or the it wont dissengage properly. I had the former problem, but then after driving a while it suddenly fixed itself and poof! no more clutch slip!

    Still going to put in the stage 3 I ordered, along with the trans sitting on my floor. Just wont be right now, might wait till the syncros are totally gone or I blow up the trans some other way.
    Somewhere an Equinox is missing its "N".....

  9. #67
    Touring Champion
    MP81's Avatar
    Join Date
    Jul 2015
    Location
    Washington Township, MI
    Posts
    3,557
    Stage 3 or Stage 3+ (assuming Spec)?
    2014 Chevy Cruze Diesel - MSR 013 17" wheels, Black Bowties, UR Rear Lower Bar
    Hidden Content
    2007 Chevy Cobalt LT Coupe - M62 w/ 2.9" pulley, Header/Downpipe/Exhaust, FE5 Struts/Shocks/Control Arms/Front Swaybar, SSC Springs, Powell Hardcore Rear Swaybar, MSR 045 18" wheels w/ Direzza ZIIs, G85 Recaros + much more
    Hidden Content
    2017 Chevy Volt LT - Black Bowties
    Hidden Content
    1981 Chevy Camaro Z28 - Zapco Amp & Pre-Amp/Equilizer, Kenwood Tape Deck, Pyle 8" Woofers & SEAS 4.5" Mids in Deck, JVC Ribbon Tweeters in Doors, Ceramic Coated Longtubes, 2.5" Pypes Stainless Exhaust, Bilstein B6 Shocks, GW U/L Control Arms, Hotchkis Springs & Sway Bars, DD HDX Cluster
    Hidden Content

  10. #68
    TheCruzen is online now [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    173
    @MP81 It is a spec clutch from OTTP and its a stage 3, mainly because it was only $10 more than a stage 1 and I know I'll keep modifying things
    Last edited by TheCruzen; 04-14-2019 at 08:57 PM.
    Somewhere an Equinox is missing its "N".....

  11. #69
    Touring Champion
    MP81's Avatar
    Join Date
    Jul 2015
    Location
    Washington Township, MI
    Posts
    3,557
    Ahh ok - reason I ask is because the Stage 3 is a six-pick, the Stage 3+ is a disc, so it's a LOT easier to drive, with the same power handling.
    2014 Chevy Cruze Diesel - MSR 013 17" wheels, Black Bowties, UR Rear Lower Bar
    Hidden Content
    2007 Chevy Cobalt LT Coupe - M62 w/ 2.9" pulley, Header/Downpipe/Exhaust, FE5 Struts/Shocks/Control Arms/Front Swaybar, SSC Springs, Powell Hardcore Rear Swaybar, MSR 045 18" wheels w/ Direzza ZIIs, G85 Recaros + much more
    Hidden Content
    2017 Chevy Volt LT - Black Bowties
    Hidden Content
    1981 Chevy Camaro Z28 - Zapco Amp & Pre-Amp/Equilizer, Kenwood Tape Deck, Pyle 8" Woofers & SEAS 4.5" Mids in Deck, JVC Ribbon Tweeters in Doors, Ceramic Coated Longtubes, 2.5" Pypes Stainless Exhaust, Bilstein B6 Shocks, GW U/L Control Arms, Hotchkis Springs & Sway Bars, DD HDX Cluster
    Hidden Content

  12. #70
    TheCruzen is online now [OP]
    Handbrake Released TheCruzen's Avatar
    Join Date
    Dec 2017
    Location
    Clarkston, MI
    Posts
    173
    @MP81 The 3+ is +$180 vs 3 @ +$10. Was trying to stay under a grand with tax and shipping.
    Somewhere an Equinox is missing its "N".....

  13. Remove Advertisements
    Chevy Cruze Forum
    Advertisements
     

+ Reply to Thread
Page 7 of 8 FirstFirst ... 5 6 7 8 LastLast

Quick Reply Quick Reply

Register Now

Please select your insurance company (Optional)

Similar Threads

  1. Building The Cruzen2.0
    By TheCruzen in forum Cruze Owner Projects
    Replies: 210
    Last Post: 12-17-2018, 07:55 AM
  2. Cruzen2.0 - Part 1 (Initial Build)
    By TheCruzen in forum Cruze Owner Projects
    Replies: 4
    Last Post: 12-14-2018, 08:38 AM
  3. New Cruze owner, welcoming adivce/tips for mods and upgrades
    By jms211 in forum CruzeTalk New Member Introductions
    Replies: 1
    Last Post: 03-31-2016, 04:12 AM
  4. Went in for exhaust repairs, and they give us a loaner...but
    By DJSW in forum Gen1 Diesel General Discussion
    Replies: 10
    Last Post: 11-01-2014, 08:18 PM
  5. Good Useful Link for Service and Repairs
    By springer64 in forum General Discussion
    Replies: 2
    Last Post: 06-01-2013, 07:58 PM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.2