Chevrolet Cruze Forums banner
1.4t
1-20 of 26 Results
  1. Gen1 Powertrain
    Hello all, I changed my PCV valve on my 2016 Chevy Cruze Limited 1.4T. Followed the instructions, put everything back together and tightened screws to the correct torque specification, but my car now shakes and has a whistling noise a few second after it's turned on. I checked the Intake...
  2. Gen1 Service Issues
    Hello all, I hope you're doing well. I've quite a few issues with my 2016 Chevrolet Cruze Limited LT (50,000+ miles). I'll write my issues and any mitigating steps I've taken in a chronological order: - About a month ago, my car started rattling, and per a few YouTube videos it was very...
  3. Gen1 1.4L Turbo
    Hi all, My wife's 2012 1.4T transmission began making some odd noises yesterday. Doing some driving, it appears to do the following: At or above 28 mph, it will begin to make a ticking noise that seems to be vehicle speed related. When it shifts gears, or engages the TCC clutch at 28 mph...
  4. Cruze Owner Projects
    Hey everyone. I’ve got a 1.4t cruze with a ZZP catless downpipe, and muffler delete. I’m interested in getting a 2.5” downpipe back exhaust, but worried how it will run. Will it run correctly without a tune? Thanks.
  5. Gen1 1.4L Turbo
    I am looking on replacing the engine on my 2011 1.4T Cruze, I have done it to a buddies car before but his was 2015 after that he sold it, I was looking a few options but I do not know if there are any major differences from the 2011, 2012 , 2013 , 2014 , 2015 model years . I found a few 2013...
  6. Gen1 1.4L Turbo
    I have a 2011 cruze 2lt 1.4t with 150k miles. I've owned it since it was brand new. I'm currently running on the 4th turbo. It was replaced twice by the dealership under warranty and once by an independent shop. However it is now starting to surge again so I'm guessing I'll need to change it...
  7. Gen1 Powertrain
    Hi All, 2013 Sonic LTZ with the 1.4L Turbo. Check engine light came on with the P0234, no other pending codes. I am led to believe that my two options are to replace the turbo assembly or replace the MAP sensor. MAP sensor could be at fault because it could be intermittently sending an...
  8. Gen2 Powertrain
    2016 Cruze 48xxx miles Hey everybody, I've recently noticed a loss in power and even kind of a judder feel when accelerating. It isn't jerky but more of a warble that finally goes away around 4k. Maybe it's waiting for a certain amount of boost :unsure: , I don't know. This is my first forced...
  9. CruzeTalk New Member Introductions
    Anybody know where to find intercooler piping? I don't need the big sets of piping or a $200+ manufactured one, which is all I seem to be able to find for some reason. I'd like to build my own set up. Any suggestions? Already checked the other "intercooler piping" thread and it wasn't much help...
  10. Gen1 Powertrain
    Hi, new guy here. I am trying to find anything on a turbo for my car but all I can find is 1.4L Cruze turbos and was wondering if there is one for purchase for the 1.4T. I am very new to working on cars and modifying them in anyway, but I'm eager to learn. So if anyone has any insight on this...
  11. Cruze Parts
    I bought this Brand new and only used it for about 1,200 Miles before going with the typhoon intake system. This filter does improve throttle response and fuel economy also, especially with a tune. I am selling for $36.50 Shipped to the 48 US states. K&N Part Number 33-2966 I have put it on...
  12. Gen1 1.4L Turbo
    First off, sorry the title isn't as interesting as some of my others. Does anyone know the size of the flange of the v band that goes from the turbo to the downpipe? I'm trying to gather some stuff up and make my own. The two offered (I think ZZP and BNR) are excellent! And, affordable. That's...
  13. Gen1 1.4L Turbo
    I'm going in for some exhaust work today. Was wondering what you guys have found in that sweet spot for tubing size? 2011 LT 1.4T
  14. Gen1 Audio/Electrical Tutorials
    How To: 1.4 Turbo Boost Gauge Install (Picture Heavy) Hello this is how I installed my glow shift tinted color 9 series in my 2013 cruze 1.4t eco mt. I wish this was out there when I installed. (sorry this website downsized my pictures) Difficulty easy Materials/ tools Gauge 6 ft vacuum...
  15. Gen1 1.4L Turbo
    ok so let me start by saying this started out as a facebook question and through insight and knowledge from several different people i do believe we are about to have a major breakthrough for sonic and cruze platforms. i am about to have my heads ported and my cams reprofiled to maximize gains...
  16. General Discussion
    Hey guys, Our Aussie Cruze seems to have always been leaps and bounds ahead of the US Cruze, however it's been the opposite with the Barina (Sonic). Well Holden has caught up. They're finally putting the 1.4T into the Barina along with sports suspension, body kit etc. 2014 Holden Barina RS...
  17. General Discussion
    Hi gang! I have put money down for a cam regrind with Gude performance. We have been talking about this for some time, now and it's pretty exciting. Bill did a grind for my last car, civic with a D17A2 that netted about 20 hp (mild road race grind- had a lopey idle). For this project they need a...
  18. Gen1 1.4L Turbo
    Hello All, This is my first thread so forgive me if I ask dumb questions. I purchased a new 2013 Chevy Cruze 1.4L AT 1LT RS with All Star Package and other goodies. Anyways, I look around on the internet and everything I find is for the 2011-2012 Chevy Cruze. I searched on this website also...
  19. Gen1 1.4L Turbo
    Just wondering if anyone has an aftermarket shift knob. Looking at getting something weighted. Im thinking 200g should be perfect.
  20. Gen1 Audio & Electronics
    Thanks to bubby2411 for the helpful advice on which line to use and fuse to tap. It's a glow shift gauge that reads both vacuum and boost. Max boost is about 16 psi and max vacuum is about -22 psi Hope you guys like it.
1-20 of 26 Results
Top