Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-40 of 154 Results
  1. Gen1 1.8L
    On my 2013 Cruze LS, I've been chasing a check engine light with both a p0496 and a p2067. I'm keeping my fingers crossed on the p2067, but for the p0496, I think I got it licked. I replaced the under-hood purge valve yesterday, and so far today, the CEL has remained off. The car seems to...
  2. General Discussion
    Hello, This is a very odd question however I just got a 2010 JG Cruze 2nd hand (Australia) and my dipstick in the photo looks different to the dipstick in the manual... do I have the right dipstick??? :rotate: hoping another fellow owner could check theirs and compare.... thanks LOL
  3. Gen1 1.8L
    Hello everyone. I have a temperature sensor probleme. My temperature gauge is at minimum (no reading) and the message : ac off due to high engine temperature. even when I start my car and it is cold this message is displayed After looking, I noticed that there was 3 temperature sensor. -On...
  4. Gen1 1.8L
    I have a 2012 Cruze with the 1.8L. Ever since I did the timing belt at 100k it's done nothing but nickle and dime me to death. Now it's this metal tube under the thermostat housing. I thought it was the housing and just replaced it and then started seeing the drip from the metal tube. I...
  5. CruzeTalk New Member Introductions
    I have a 2014 Cruze A/C off due to high engine temp Its a 1.8L Cruze and it is doing the whole "A/C off due to high engine temp". After that message the temp gauge continues to rise and says "engine overheated idle engine". My car has been overheating. My heat won’t work. I keep smelling...
  6. Gen1 1.8L
    Need Help Bad! I have a 2011 1.8L Cruze that will not turn over. Battery is good, starter is good, VVT solenoids are good, cam sensor good, performed soft start....still no good. HELP!
  7. Gen1 Powertrain
    So as stated my cruze is having some oh so wonderful transmission problems. I've been messing with it for a few weeks now and while I've made progress I've come into other issues. So let's hit it from the top, approx. 3 weeks ago my wife was pulling into the gas station and the car lost all...
  8. Gen1 Powertrain
    Hello y'all new to the forum. So the other day while on a trip heard some noises from my Cruze, before I could got home felt like the timing belt snapped and it died. Checked it out and turns out I spun a bearing...block is pretty much done (or at least significant amount of $ and machine work)...
  9. Cruze Owner Projects
    Hello every one I'm new to the forum just bought my cruze it's a 2016 limited 1.8l..just a few questions on exhaust air intake and tunes..idk much about the cruze like I said I'm new to this..any thing helps thanks
  10. Gen1 1.8L
    Not sure if there?s already a thread somewhere for the 1.8 specifically. I?ve just purchased my 16 Cruze limited 1.8l 6spd and I?d like a couple small performance mods, starting with a cold air intake. Does anybody have a suggestion?
  11. CruzeTalk New Member Introductions
    So happy that I came across this forum. I'm a new driver who recently purchased a 2013 Cruze (1st car) which I had been looking at for months. My car has 71,000 miles on it and still has that new car smell. I am relying on my friends and research to know about maintaining this car cause I am...
  12. Gen1 1.8L
    Hello. I'm new to Cruzetalk. Need help. Trying to save daughter some money, I replaced the timing belt for her. Educated myself on how to do it. Bought the specialty tools and used them correctly. Made sure timing marks are right on. Nothing rotated during replacement. Now upon start-up there is...
  13. CruzeTalk New Member Introductions
    Recently bought a cruze 94,000 miles 6 speed pretty nice looking car and then 2 weeks having the car a deer jumps out on my way to work. Insurance wants to total the car and only give half of what its worth (which is pretty normal). So im thinking instead of being stuck with a high balance left...
  14. Gen1 1.8L
    Back in February my CEL came on and when I checked the code it was P2070, Intake Manifold Tuning Valve Stuck Open. I tapped the solenoid or actuator with a the handle of hammer and the CEL went out the next day. All was good for a few months, then last month the engine lite reappeared, same...
  15. General Discussion
    Hello everyone I have a quick question to ask about my Cruze so long story short the car will run at normal temp but when I driving down the highway faster than 65mph the temp gauge will show it's dropping in temp it will stay there for a couple minutes some time and then slowly go back to...
  16. General Discussion
    Good day, I own a Chevrolet Cruze 1.8L 2010 automatic that been giving me problems. I have spent so much money trying to fix it that I am fed up and have decided to replace the engine entirely. Unfortunately the 1.8L engine seems scarce here is South Africa, they are hard to find. The 1.6...
  17. Gen1 Powertrain
    In October of 2015 I began to notice that my clutch was slipping. My dad offered to replace everything to save me some money. I called to order the parts and even after giving the VIN number, they could not give me the exact part numbers. Apparently the clutch size was changed partway through...
  18. Cruze Owner Projects
    I'm debating on adding a cold air K&N intake and possibly the Trifecta tune to my 2012 1.8l Cruze. I keep debating if this is going to be worthwhile, or if I'd be better off trading up before making additions. What are your thoughts? Most of the tune posts I've read looked promising with the...
  19. Cruze Parts
    These are new and have never been installed. Lowers 1.5-2.0 inches. $175 shipped.
  20. Gen1 Service Issues
    Have had a 2012 LS for nearly 5 years and have been pretty happy with it. A few months ago, I had popped the hood and noticed the coolant reservoir looked low...like maybe 1/4 inch above the lower hose connection. Mentally said I should pick up some dexcool and add some in. Unfortunately, I...
21-40 of 154 Results
Top