Chevrolet Cruze Forums banner
2010
1-20 of 77 Results
  1. General Discussion
    I have 2 issues with my 2010 Holden cruze petrol car. I firstly had a lot of smoke coming out of the exhaust when accelerating hard while reversing up a driveway. The next day, I was driving the car when the engine starting shaking and 3 warning lights signalled. Code reader stated code p0301...
  2. Lighting
    Hello all, my name is Brian and i am a new member in the UK. I have bought a 2010 Chevy Cruze (very cheap) with some issues. 1st is the tail lights do not work. all the lights at the front work and indicators work all round but have not tail or brake lights. i have checked all fuses both under...
  3. General Discussion
    Hi everyone need some ideas please.. So driving on my way to JBay Eastern Cape and heard a klucking noise on the left side of the car and then the car started loosing power and died I opened the bonnet and my engine was covered in oil. I tried starting the car again and nothing as dead as a...
  4. Gen1 Service Issues
    In my Cruze 2010 manufactured in korea, Car lock sign is appearing on dash board. All attempts are unsuccessful. Can some guide in the matter.
  5. Gen1 Audio & Electronics
    i have i opened the wheel and now i need the installation how i do it ty
  6. Gen1 Audio & Electronics
    Hi I have a question regarding the auto light function. There's many topics on this already but none seems to answer my questions. Question is: Do I even have automatic light function?! The manual says so, and describes light intensity depending on surroundings, and the sensor works fine for...
  7. General Discussion
    Hello, This is a very odd question however I just got a 2010 JG Cruze 2nd hand (Australia) and my dipstick in the photo looks different to the dipstick in the manual... do I have the right dipstick??? :rotate: hoping another fellow owner could check theirs and compare.... thanks LOL
  8. General Discussion
    I have a 2010 Cruze that has coolant issues. It's a slow leak auout two months. Is anyone have same problem? Cause the dealer said I have to change the thermostat housing and bakelite base. Can I add the Coolant Leak Repair in Coolant Recovery Tank? Below is a picture about my problem, you can...
  9. Gen1 Service Issues
    Hi, I would like some help on this one.. My 2010 cruze started to do this weird thing lately, a specially when I'm pushing the gas to accelerate (around 3000 rpm and more), it seems like the gearbox is hard to decide what is the best gear and just shift the gear sooner than it supposed to. In...
  10. CruzeTalk New Member Introductions
    hi i bought a cruze of 2010 model it only have 38,000km on it. My problem is the Dic light is not full lighting. and other problem is with my hazard switch is flashing while is off.Any help pls cause im bit confused and i really love my car?
  11. Cruze Parts
    Dual Projector headlight with led bar and HID/Xenon in low beam high beam is halogen still these are h7 both hight and low beam are h7 bulbs.... the ballet for the low beam hids are also included they are easy install plug and play... they do have an amazing cut off on low beam and iv leveled...
  12. Gen1 1.6L & 1.6L Turbo
    can someone guide to me how to change 2010 1.6 gasoline 5 speed manual transmission oil? there have a topic but photos doesnt exist.
  13. Chevrolet Cruze News and Reviews
    ACDelco’s Restore and Ride Challenge: Can Steve’s 2010 Chevrolet Silverado Lead Him to Victory?
  14. CruzeTalk New Member Introductions
    can anyone help me my car wont move even i put the drive position i accelerate and theres nothing happen even i put the reserve position and its still the same.. can anyone have a solution.. my car have 33000 miles and automatic transmission
  15. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello, The auto stick of my Chevy cruze 2010 is stuck in parking. I was able to move the car by using the push button on the console. All my rear red lights are not working so I assume its a problem connected with tail lights. The key is stuck in the ignition and I cannot open the trunk to...
  16. CruzeTalk New Member Introductions
    Does anyone have the torque settings for the following: Flex plate Torque converter Engine mounts Any help would be highly appreciated! Thanks so much!
  17. Gen1 Diesel General Discussion
    Hi everyone I have a 2010 jg holden cruze with 157000kms on the clock. There is 1 issue with the car it starts and idles fine then when you drive it and start to load the engine up when its temperature is cold the car jerks backwards and forwards and engine light flashes until you push the...
  18. Gen1 Audio & Electronics
    Hi - I have the following 3 issues and I was wondering (a) How easy/cheap they'll be to fix, and (b) Whether I need to go to a Chevy/GM dealer to get the best chance of fixing it. 1. The boot (sorry, trunk) won't open from the button on the car; it unlocks fine from the button on the key. 2...
  19. Gen1 Service Issues
    Hello i have a 2010 Chevrolet Cruze LT(1.6L) with 45000 miles. I changed the crank shaft position sensor last week, then the engine light started blinking after i drive for couple of minutes and if i turn off the car and restart it again it returns normal until i drive it the engine light...
  20. CruzeTalk New Member Introductions
    Hi everyone. New to this forum and wondering if someone can help. I have recently bought a 2020 cruze cdx and the engine has seized (from previous owner). Just wondering if the engine on the 2014 models 1.8 petrol will fit in to mine? Thanks in advance.
1-20 of 77 Results
Top