Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Gen2 Wheels, Tires, Brakes, & Suspension
    I've been wanting to upgrade my stock 16" wheels on my 2017 Hatchback RS since I bought it brand new. I prefer OEM wheels, but $2600 that Chevy is asking is too steep. I finally found a solution that I love but in a price range I could justify. Here goes: Subaru wheels (18x7, 55 offset) off...
  2. Gen1 Audio, Electronics & Electrical
    Hey I was wanting to install new speakers in my 2011 Chevy Cruze, also wanted to add a subwoofer. I was wondering if I would need to change the stock headunit to do all this and is there adapters I need to buy for each speaker to connect to the old wiring in the doors? Here are the parts...
  3. Gen1 Audio, Electronics & Electrical
    I'm about to purchase a 2015 Cruze and I'm planning the audio install. I already have a lot of equipment left over from my last car and I just need some MDF adapters for the Silver Flutes I have. I know there was a group buy from a forum member, but I'm not sure if that's still available. If...
  4. Gen1 Powertrain
    Anyone know if they sell fittings with the bolt that holds the line on the transmission housing for running custom trans oil lines?
  5. Buy/Sell Classifieds
    Selling NEW custom made LugmanUSA 5x105 to 5x105 wheel adapters. Only mounted a pair for test fitting. Not driven on. Hub PCD = 5x105 Wheel PCD = 5x105 Hub bore (backside only) 56.1 mm 1.25" 32mm - pair **$85.00 shipped OBO 1.50" 38mm - pair **85.00 shipped OBO
  6. Gen1 Audio, Electronics & Electrical
    Hey guys, I'm sure this has been answered a thousand times here but I have yet to dig up anything. I have a 2013 Cruze and the driver side front speaker is blown out. I have speakers and the mounting adapters but can not find the correct wiring adapters. None of the plugs I can find match. Do...
  7. Gen1 Wheels, Tires, Brakes, & Suspension
    Any negative views on running adapters to change the lug pattern ? Its a lot easier to find wheels if they could be a more common lug pattern , I've read that adapters can be as small as 20mm Sent from my XT1254 using Tapatalk
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello, I've looked through the forum to see if anything is out there could help me but I couldn't come to a conclusion. I've just purchased MSR Style 144 Concaved Wheels with a Size of 18x8,5x114.3 BP and 35 Offset. I know I will need an adapter, but I'm not sure which adapter I will need. This...
  9. Lighting
    Hey everyone, Been a while. I am having such a hard time with this install plan. I have the dash kit, which i am set on. I am going to be getting the GMOS 044 for the main harness, but i need a few questions answered please. And before you ask, yes ive done plenty of searching but i have found...
  10. Cruze Parts
    Testing the waters on my current setup. Tires a like new...hankooks in the rear, bfgs in the front. I can have my other two bfgs mounted if needed. Wheels are in great shape, one rear has some minor clear peel which is common on these, but wheels are in great shape and well taken care
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    So i remember seeing a thread along time ago on wheel adapters. i Was wonder who is using them to change up their bolt pattern i found a set and a set of wheels im buying but i was wondering what band do yall recommend for adapters and how thick should i order them> i know ill have to roll my...
  12. Cruze Parts
    bought these last summer to use with some tsw rockingham rims. unfortunately i didnt calculate offset of the rims, and didnt get a low enough profile tire (went with the stock 18 tire size-225/45ZR18, and 40 offset rims) and with the car being lowered on coils they rubbed on big bumps. they are...
  13. Bad News Racing
    These work on the Sonic and Cruze. Machined from billet aluminum, featured in Import Tuner Magazine, finally on the market! BNR Sonic/Cruze Steering Wheel Adapter
  14. General Discussion
    JUst wondering if anyone here is using wheel adapters for a better wheel selection, and if so is there any downside to doing so? TYIA
  15. Gen1 Appearance, Body, Detailing, & Interior
    Im looking at getting MOMO's Sentry Rims The specs for these rims are: 18" x 8", +40 Offset, 5x114.3 Bolt Pattern, 73mm Hub My Question is What spacers/adaptors do i need to make these fit? I know custom ones will probably have to be made. Ive heard of from other...
  16. Cruze Parts
    Selling my chevy cruze adapters got them for my car but i was thinking of just getting some stocks and going lower so i just want ro get rid of them
  17. Gen I
    I have two sets of Scosche 6-1/2" speaker adapters. The Cruze's speakers are molded into the factory mounts and these will make it possible to install new aftermarket speakers without having to make custom mounts or drill into your door. 2006 - up GM 6.5" Speaker Adapter
  18. General Discussion
    I have 2012 Chevy Orlando, it is based off of the Cruze. I have some old rims that I would like to put on the orlando, but my bolt pattern is 5x100, is there anyway to get adapters for this bolt pattern to mate it to the 5x105 bolt pattern? If not I want to sell these rims for cheap, like 600...
  19. Gen1 Wheels, Tires, Brakes, & Suspension
    As the title says, do wheel adapters (to change lug pattern) are good/safe or you need to stay away from them? I'm searching for a new set of wheel but there are not a lot of choice as a lot of you might already had noticed. Also where to find the adapters?
  20. Gen1 Wheels, Tires, Brakes, & Suspension
    I've found a set of wheels i really like, the only problem is obviously the lug pattern. The wheels i am looking at are a 5x112 with 35mm offset. Can anyone tell me if, 1. there is a company that makes custom wheel adapters, 2. if 35mm offset will work. hub bore is 66.6. That is all the...
1-20 of 20 Results