Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 46 Results
  1. Gen I
    Hi so I have an AEM boost gauge and a matching AEM wideband gauge along with a ZZP a pillar pod that'll fit both gauges for a first gen Cruze. The AEM wide band is missing the sensor but that's it. And each one of the gauges has like one LED around the outside of it missing but other than that...
    $200 USD
  2. Cruze Parts
    This is an AEM wideband controller. It's missing a sensor and just needs that and there is an LED that went out. Hence the price. Though I am selling this in a boost controller and the two gauge a-pillar pod from ZZP as a set in another post in the classifieds. The boost gauge actually has the...
    $60 USD
  3. Cruze Parts
    I have an AEM boost guage with all wiring, hoses, and sensor in good condition. I have the extra reversible faceplate and bezels to go with it. It has an LED out on it. But doesn't affect performance and is an easy fix (.30 cents and a quick soldering job). Works great other than that. Also has...
    $80 USD
  4. Cruze Owner Projects
    So welcome to my build log, this is sort of a build log slash restoration log, I'll make a list of things I want to do and things I've done. My goal is to restore this car as I can with better upgraded parts and eventually install a supercharger. I'm open to any and every comment or suggestions...
  5. Gen 2 Tuning/Engine Modifications
    Hello, i’m a new member here and this is my first post. I recently installed an AEM CAI on my 2017 Cruze (LE2). My question is about the little rubber hose that connects the PCV reservoir to the intake. It’s not really a tight fit and it literally feels like it just rests on the nipple. I’m...
  6. Gen2 Powertrain
    I replaced the MAF. But still saying the other one is bad. I get the dreaded "Loss of Engine Power" and it feels like it is running on a single piston. I am trying to find someone who can give me a tune. Will this help at all? Has this happened to anyone? What do I do?
  7. Gen 1 Tuning/Engine Modifications
    So, I don't want to hook it up to the AC wire. I mean, yeah. I could hook up a switch or make a connector so that only one or the other can be hooked up at one time, but I know you can go through the EGR valve too, but I a cannot find anything on either where the **** wiring is for it, nor if...
  8. Cruze Build

    This is my cruze that i put a lot of time and money into. It’s my daily and racecar by night. many more mods coming ?
  9. Cruze Parts
    Up for sale AEM Intake (Part#21-744C), comes with a new Spectre Air filter (cleanable) (comes with all the hardware and paperwork) Asking $150 US +Shipping MGP Caliper covers part#14232SCRZRD for first gen Cruze (set is front and back, Red with silver writing) used less than a summer asking...
  10. Gen2 Powertrain
    Hey all! I'm a brand new 2018 Chevrolet Cruze owner and also new to these forums. I just installed a new AEM CAI and was initially pleased with the sound. However, I drove it for about 30 miles... mostly freeway... and then it started making a sort of wheezing/choking sound on top of the normal...
  11. Gen I
    Stuff removed and now up for sale. BNR wastegate: $200-shipped-sale pending BNR- ls7 coil pack-(blue)- streetfire coils. Was shipped back and returned with beefed up brackets and supports and new harness. $450-shipped-sale pending MP fab intake, powder coated wrinkle blk. $200(Sold). BNR-...
  12. Gen2 Powertrain
    Not sure which CAI to get for my 1.4T. Sell me on which one to get!
  13. Gen2 Service Issues
    HI everyone. started this thread as more of a information based thread bout other peoples experience with slightly modified cruzes ( cold air intakes, exhaust)and the GM service department. To start off with I have a 2016.5 cruze LT sedan with the 1.4T have had a AEM intake on sense about...
  14. Gen2 Powertrain
    Hi I have a 2016 cruze gen 2 and was wondering if anyone knows if the aem 21-805C AEM Cold Air Intake System will fit my car if anyone can help I'd greatly appreciate it.
  15. Gen2 Powertrain
    Today I installed the AEM filter for 2017 Cruze. Everything worked fine for a while, the sound it's amazing. The problem came later when the "check engine" light started to show up. It's not going away but the car works as usual. I didn't tested it on the road yet. Did somebody experience the...
  16. Aem

    General Discussion
    Dose anyone have the aem sticker for the CAI that they didn't use. I had to purchase mine from a random place as it is not legal in .CA. so it dose not come with the sticker. Willing to buy it off of you. Thanks In advance
  17. Cruze Parts
    Includes all hardware. I'm reverting my car back to stock because I'm getting rid of it. Asking $200 shipped and it will be shipped in the original box that it came in. I've had it installed on my car since late May. No photos of it unmounted at the moment, sorry.
  18. Cruze Parts
    Intake includes box and original hardware. Everything is in excellent condition. $200 shipped.
  19. Gen2 Powertrain
    Easy enough install. Took me about 15 minutes. The instructions that came with the intake were crystal clear with pictures. It's a quality kit. The gun metal finish looks great. The hardest part of the install was running the edging around.
  20. Gen2 Powertrain
    NEW PRODUCT ALERT In stock now at BNR: AEM Intakes for your 2ND GEN CRUZE LE2! On sale for the first 5 orders, add to cart to see sale price! 2016+ Chevrolet Cruze LE2 AEM Intake
1-20 of 46 Results