Chevrolet Cruze Forums banner

amp

  1. CruzeTalk New Member Introductions
    New member out of Texas. I own a 2016 gen2 RS. Only mods I've done so far is a BNR tune, complete audio overhaul, sound deadening from the front doors to the trunk and some window tint. Been browsing this forum for some time now but decided to join cuz everyone seems very helpful and generally...
  2. Gen2 Audio & Electronics
    I'm looking to replace the stock speakers in a gen 2 LT sedan with the stock 6-speaker system. Not looking to shake the neighborhood with bass as much as have a more clear, lively system for music. Can anyone recommend speakers that are "worth it" and don't require replacing the stock amp? And...
  3. Gen1 Audio & Electronics
    I have a 2018 chevy cruze base model. Looking for a suitable remote wire to hook up aftermarket amp. It's the only thing left to hook up and it's frustrating the **** out of me.
  4. Gen1 Audio & Electronics
    I recently upgraded the component speakers, added a 5 channel amp and sub. I used Xtreme's recommendations for the speakers, PAC, and wiring kit (mini dsp to be added soon). Everything seemed to be working fine at first except I noticed a humming noise coming from the speakers. I took it back to...
  5. Gen2 Audio & Electronics
    Can someone please explain how to get power to an amp through the firewall? I’ve tried piercing the gasket above the emergency brake but I can’t get through. I’ve seen videos of people taking out the radiator coolant tank and going behind there but I can’t even get the tank out. I’ve searched...
  6. Buy/Sell Classifieds
    I'm selling my Kicker 10" 200w PowerStage Subwoofer & 200w 4 Channel Amp System. $675 OBO Shipped. Retails for $1,249.99 https://www.crutchfield.com/…/Kicker-VSS-Powerstage-System.… I used this system for about 4 years and it sounds really good. It really enriches the stock audio system and...
  7. Gen2 Audio & Electronics
    Hi all, Contemplating a mounting location for my amp and DSP, and the trunk appears to be the only viable option. There doesn't appear to be enough room under the seats for the amp. The DSP would probably fit, but I'd like to keep them together. Have any of you mounted an amp in the trunk? I...
  8. Gen1 Audio & Electronics
    Hi I’m wondering how to wire a 2 channel amp for my 6x9’s in my rear deck. The amp I’m using has a high level input. So how could I wire it onto a stock radio.
  9. Gen1 Audio & Electronics
    I am trying to figure out why the sound is sometimes distorted and the bass comes and goes in my install. There is also a thump a couple of seconds after opening the door with car off. I also noticed that turn signals and some chimes come through the speakers. What I have done: I tapped into...
  10. Gen2 Audio & Electronics
    Hey guys, I've traveled far and wide in search of an easy single sub/amp setup in my non-Bose 2017 Cruze Premier. It's hard finding much info on this body style. I've pieced together a lot from this forum and other websites so currently I have: PAC Loc spliced into the rear of the infotainment...
  11. Gen1 Audio & Electronics
    Hi Guys, I have a 2014 Chevy Cruze LT with the my link. I bought the Kicker upgrade 200 Watt/DSP amp and decided to forgo the Kicker sub, instead I took my JL 500/1 amp and a 13" Focal Subwoofer out of my old car. I haven't mounted the amp yet, looking for a good spot. For those of you who...
  12. Gen1 Appearance, Body, Detailing, & Interior
    Hi, Safety first, i'm not talking about turning off the brake light. I want to turn the interior cluster and radio display on and off, because they are not dimmable when you use the spring loaded knob to turn the automatic lights off. All the exterior lights - sans brake light - turn off with...
  13. Gen2 Audio & Electronics
    Situated directly next to the battery. Anyone know what circuit this is on?
  14. Gen1 Audio & Electronics
    Hello Folks, I've installed an Aftermarket AMP , Speakers & a Sub. The thing is that my sound has got Loud, but the problem is the Sound quality has dropped significantly and the Tweeters are sounding Harsh now. My Factory system was: Single din Headunit & four speakers as you know. Parts...
  15. Gen1 Audio & Electronics
    Have had my subwoofer and amp installed for awhile now with the stock headunit, it doesnt work however with the Aux input. I followed a popular how-to that was posted on here and am thinking i may have missed a step or connected something wrong, has anyone had a similar issue that you've figured...
  16. Gen2 Audio & Electronics
    Which wire do I use for a remote turn on wire for my aftermarket amp in a 2017 Cruze LT non BOSE. I need a wire that doesn’t turn the amp off when the auto stop start restarts the engine. I am amplifying the door speakers with this amp and not just adding a sub. Does anybody know. I had a 2017...
  17. General Discussion
    I changed my sub from a ported to a sealed and now either my lc2i or my amp goes into protection mode or it just stops beating until I turn the volume down.why
  18. Gen1 Audio & Electronics
    Hi everyone, I'm trying to install an amplifier in my 2015 cruze. I have all the wires ran, the amp is all set up and powers on, I just need to figure out the RCA cables and the remote wire. I purchased a PAC AA-GM44 with the understanding that this would give me RCA outputs for my stereo so...
  19. Gen1 Audio & Electronics
    I have a 2012 Cruze LTZ RS that has the Pioneer System in it. I am in the planning and gathering equipment stage of doing a SQ system. My plans are to use Vifa / Silver Flute combo. MiniDC / miniDSP. AudioControl LC2i. Keenwood x801-5. JL Audio 12w3 Sub. All KnuKonceptz Wire. My plans is...
  20. Gen2 Audio & Electronics
    I have 2016 cruze need to know which wire I can tap in to for hi/lo converter or what do yall recommend to install amp for sub to factory head unit thank
Top