Chevrolet Cruze Forums banner

bearing

  1. Gen1 Wheels, Tires, Brakes, & Suspension
    I did some forum searching and didn't see this as something that came up, so I thought I would put a post out there and maybe it will help someone in the future. I got a Service Stabilitrak warning light and TCS and ABS lights. I pulled the codes and it said the wheel speed sensor was bad...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi guys, haven't posted here in a while. Having some issues with the cruze. '13 Eco M6,128.5k miles. Transmission bearings are whining pretty good. Would like some advice as to what options are out there for replacing the transmission. Seems like buying a used one is possibly a time bomb as...
  3. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello Everyone, I own a 2012 Cruze Eco 6 Speed. I noticed noise coming from the front wheels on my Cruze. The sound is only noticeable at +30 mph, and gets louder as speed increases. So I figured it was either a bad tire or wheel bearing. I have relatively low quality tires, so the first thing...
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    Was on the highway, started noticing a sound - thought it was the pavement.... nope, its a wheel bearing. I ordered a new one. How do you tell which side is noisy? Only gets loud while driving over 20mph.
  5. Gen1 Powertrain
    Do these cars have a pilot bearing? I've got a 2012 Eco. I'm swapping out the old tired engine for a new one that came from a 2013 auto car. I looked for the pilot bearing to pull it out and move it to the new motor but there wasn't one. The inside of the space was covered with clutch dust...
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    2012 Cruze Eco MT with 180K Miles. Last week, the ABS and Stabilitrak messages came up. Used an ABS code reader to diagnose problem to be with the left rear sensor or wheel bearing. Went to remove wheel bearing to clean and inspect it, but it is stuck to the backing plate for the rear drums. Any...
  7. Gen1 Service Issues
    I took my 14 LTZ RS to the dealership for an oil change and new brake pads, which i brought so total was $166 however they said my driver side hub bearing is damaged is will be about $400 to fix. what is a hub bearing? is it really that expensive? what will happen if it finally breaks and im...
  8. RockAuto
    WJB is offering RockAuto customers an exclusive 10% off instant rebate on the entire line of WJB Wheel Hubs, Bearings and Seals the entire month of March. Established in California in 1992, WJB has focused on and excelled at making automotive and industrial bearing products. Their...
  9. CruzeTalk New Member Introductions
    I have a 17 Cruze Diesel Manual, and it only has 5000 miles on it. Pulled in to a drive thru yesterday, turned off my car, when I fired it back up, it started and was still trying to start, so I shut it off. When I turned it back on, it makes a rattling noise only when I press in on the clutch...
  10. Gen1 Powertrain
    I've done quite a bit of reading, but never found evidence of someone with a Cruze actually getting their manual transmission repaired (not replaced). Knowing that these gearboxes are common with many cars in Europe, I decided that if I could source the parts, I could take a shot at it. The...
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    I purchased my Chevy Cruze eco 2014 new. I have 48,000 on it. The front passenger bearing is failing. I only have the 3 year 36,000 mile warranty. However, in the warranty book it is written, "Under certain conditions GM and or GM dealers may provide assistance after the limited warranty...
  12. Gen1 1.4L Turbo
    Hi! I own a certified pre-owned 2014 Chevy Cruze Lt 1.4L. Don't get me wrong, I love my car so much. It's awesome... but this is just ridiculous. I'm about to have to replace the wheel bearing and hub assembly at only 50,000mi. Has this been an issue for a lot of other Cruze owners? From what I...
  13. Cruze Parts
    For Sale OE Rear Wheel Bearing sealed still in box. GM# 13500571 Can provide additional fitment info if needed. List: $183 Selling: $75 + shipping Please PM if interested.
  14. Gen1 Service Issues
    Ok so i have a 2012 ls 1.8 m/t....So ive been to the dealer countless times in the past 15k miles and have had the same issue.. when the car is on it makes a loud spinning chatter from transmission area.. whn u sink the clutch pedle in the noise stops..took it to chevy, and a week later they...
  15. Gen1 Wheels, Tires, Brakes, & Suspension
    Good afternoon everyone, this is my first post on Cruze talk, and I am in need of some help. I recently purchased a 2013 Cruze 2LT with 54k miles, and after driving it around for some time, I began to notice a rumbling noise coming from the front end of my car. The only way I can describe the...
  16. Gen1 1.4L Turbo
    I was just wonder on a 2012 Chevy Cruz 2012 LUJ turbo engine oil clearance spec's. on the; Main crank bearings______________________ Connecting rod bearing oil clearance _______________________________ They are new standard bearings and crankshaft ( not under over sized; Crankshaft Bearing...
  17. Gen1 Diesel General Discussion
    Well, I am reporting my first problem with my Diesel. It's been making a humming noise for a while now, most notably at 40 MPH, which I thought was just my snow tires. I swapped out the tires last week and the noise persisted. So, the cool part is that my problem has nothing to do with the...
  18. Gen1 Wheels, Tires, Brakes, & Suspension
    My father in has a 2012 chevy cruz lt. He is experiencing a noise on the rt side of tire. They replaced brakepafs and turned the rotor down but still hear the noise. Constant noise.
  19. Gen1 Service Issues
    I have been having a humming noise coming from the front of the car for the past 2 weeks. I jacked the car up this morning and took the left front tire off to inspect and see if anything obvious was wrong. When I crawled all the way under the vehicle I noticed that the transmission appeared to...
  20. Gen1 Brakes/Suspension Tutorials
    Be forewarned, this is a difficult DIY. If you do not have a well-equipped toolbox, do not attempt this. This DIY assumes you are comfortable working with disc brakes, and know how to properly jack up and support your Cruze. DISCLAIMER: This is for instructional purposes only. Neither I nor...
Top