Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 14 Results
  1. Gen1 Service Issues
    I have found my coolant leak...Sort of that is...coolnt is being deposited in the cavity of the oil filter housing..Has anyone had tghis issue ????? I can not see it dripping from any where im thinking i have a small oinhole or something in the cavity..If anyone has any imput let me know..Thanks...
  2. Gen1 1.4L Turbo
    All, The upper radiator hose on my 2012 1.4L (109K miles) has a hole in it where it looks like it was rubbing on a wiring harness (this is about 3 in down the hose from the water outlet). For the life of me I cannot find out how to reach the bottom clamp? Does this require removal of the...
  3. Gen1 1.4L Turbo
    Hi im sorry if this has been discussed before but i just noticed today that im missing the little black flex hose running from the bottom front of the intake box, is this something i need to worry about as i purchased the car like this?
  4. Gen1 1.4L Turbo
    2012 Cruze 1LT RS 1.4L with 90,000 miles Replaced Throttle Body(TB) at 65,000 miles PCV/valve cover replaced at 72,000 miles I have no check engine light on and no codes show when using Torque. The car is losing/hemorrhaging oil. Driveway covered in oil, skid plate covered, just a mess under...
  5. General Discussion
    Hey everybody, I just purchased a 2013 chevy cruze the other week. When I was pulling out from the bank's ATM lane the right side of my car went over a curb that divided the lanes. I wasn't going fast at all but I'm scared that there might be some damage done to my car. There is a little square...
  6. Gen1 Appearance, Body, Detailing, & Interior
    I recently purchased a 2014 LTZ/Rs bumper for my 2012 LT1. I damaged my bumper so i bought one off a wreck cruze. bumper is in great shape but i have a question about the mounting holes on the bottom of the bumper. my old bumper does not have the mounting holes on the bottom of the bumper and...
  7. Gen1 Appearance, Body, Detailing, & Interior
    I'm in the process of gathering tools, and starting to remove the passenger seat to install aftermarket heated seats in a 1LT. How do I remove the seat belt from the tensioner assembly at the lower outside edge of the seat bottom? The two T-50 bolts in the back must be pulled, the main wiring...
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    Would this result in brake failure, rattle, noise, would it make any difference at all? The cruse has the indicator on the inside top, what if you were to put them on the inside bottom?
  9. General Discussion
    Anyone got some good pics of the bottom of the Cruze? It's all snowy here, and I don't have access to a lift. Just curious to see what's under there.
  10. General Discussion
    Why not ask the experts about this clip, like my local Chevy body shop. LOL, they also wrecked this clip trying to remove it having to charge the insurance company around 40 bucks to replace both clips. This was the best of the two, and the best shot I could take with my smart phone. The clip...
  11. Gen I
    I'm sure this is a long shot, but maybe someone upgraded to leather and has OEM covers laying around. Typical let friend smoke which ended up with burn hole in the seat. Car in black uplevel cloth. Thanks guys and gals.
  12. Gen1 Audio, Electronics & Electrical
    Hi! I saw someone post this question in another thread, but didn't get answered. Can I get the dealer to do this/ pull a fuse or something? I don't like my butt getting roasted ....
  13. Gen1 Appearance, Body, Detailing, & Interior
    so i was looking for something different and a eye grabber. i was looking on ebay and come by this par. Putting them in wasn't that bad. I just ran the wire to each hazor light in the headlight. they turn on when i lock/unlock the car, and stay on as long as the hazors are on. After i put...
1-13 of 14 Results