Chevrolet Cruze Forums banner
bow tie
1-3 of 3 Results
  1. Gen1 Appearance, Body, Detailing, & Interior
    I just plasti dipped my bow ties today. 3 coats black 1 clear coat About 15-20 minutes between coats. After taking off the tape I noticed at the bottom of each bow tie had a lip almost. Basically a little thicker The top and sides of them were absolutely perfect. I tend to be a perfectionist...
  2. Gen1 Audio & Electronics
    so recently my LED bow tie burned out and i got a free replacment. Instead of throwing out the old on i kept it and dug into it to customize it. I originally wanted to a LED bow tie that turned red when braking and was white during the drive. but an idea came to me to make the lights turn on...
  3. Gen1 Audio/Electrical Tutorials
    this took me some time to do, the hardest part was the stripping of glue from car and bow tie. sorry for lack of photos tools: utility knife painters tape trim removal tool #7 socket goo gone rags hair dryer or heat gun( i used hair dryer) patients some way to clip into power continuity...
1-3 of 3 Results
Top