Chevrolet Cruze Forums banner

bowtie

  1. General Discussion
    Hey all! I was wondering who has done the illuminated bow tie? I’ve been wanting to do it, but wasn’t sure if it justified the price.
  2. General Discussion
    Anyone know where I can get precut vinyl bowtie's for a 2018 hatchback? :) Sent from my SM-G955W using Tapatalk
  3. Lighting
    Hi All! I dont post much but I am looking to do a few mods to my cruze and I am hoping to the community could help me out. I'd like to have my third brake light flash a couple times when I press the brake. I would also like to put in a glowing bowtie on the rear of my cruze. Are these...
  4. Gen2 Appearance, Body, Detailing, & Interior
    I was looking for alternate colors/versions for my Gen II Chevrolet bowtie in the front. I have come across a few black version ones (with the chrome outline) and the vinyls end up looking like a mess to me on the current gen bowties because of the ridges in the bowtie face. If possible, I was...
  5. Gen1 Appearance, Body, Detailing, & Interior
    So, I have been looking to get replacement emblems for my 2015 Cruze. I've been searching online and can't seem to find a place that sells physical emblems. Am I out of luck? Do I just need to spray them, or dip them? Also, looking to replace some of the chrome pieces along the windows and on...
  6. General Discussion
    I recently purchased a 2017 Cruze LT, and I have since been scouring the site for customization options and such. After a little bit of research I've noticed that some of the current generation Chevy models (Cruze,Malibu & Impala in particular), have similar or identical layouts. I was digging...
  7. Gen2 Wheels, Tires, Brakes, & Suspension
    Does anyone know the outer and inner dimensions in mm (millimeters) of the bowtie wheel center caps found on the 18 inch Gen 2 RS wheels?
  8. Cruze Parts
    So just as my luck would go, some jackleg decided to back out of a parking spot and hit the front of my car while I was getting gas. It's sad since I still have the drive out tags on it from where I just bought it. To make it worse, he just took off out of the parking lot before I could get his...
  9. Gen2 Appearance, Body, Detailing, & Interior
    Hi, so i heard the bowtie there is only mounted with adhesives. Can anyone confirm this? If so, i presume you put the black one on or painted it and put it back. Now if you did that too, how did you align it to match the original spot without holes? Thanks!
  10. General Discussion
    Anyone have the link for the black bowties and the cruze-lt Thanks in advance
  11. Gen1 Appearance, Body, Detailing, & Interior
    Does anybody have a link for OEM black bow tie emblems for a 2015? Also are the 2017s interchangeable bc i can find those? Thanks in advance
  12. Gen1 Appearance, Body, Detailing, & Interior
    Figured I'd share my little "mod" I did. I wanted to blackout my steering wheel bowtie cause why not my outside is done. Originally I wanted to wrap it but it is not smooth like the outside so I figured I'd do it a different way. I taped the chrome off and used a Black Paint Pen and just colored...
  13. Gen2 Appearance, Body, Detailing, & Interior
    Hi everyone, New here just got my 2016 Cruze in the Kinetic Blue. I would like to get the Black OEM Bowtie for the front and rear. However I am not sure if they will fit. Can anyone help me on this? Thanks, DM
  14. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone removed the front Bow tie? If so were there any tricky clips and such to deal with? Do you have any photo's? I am getting as much information together for my front end rebuild before I start as this is my daily driver. I have found a combination of videos and posts for the...
  15. Gen2 Appearance, Body, Detailing, & Interior
    Hello, Does anyone know how to remove the bowtie from the trunk? Are there holes underneath or is it just stuck on with adhesive? Thanks for your help!
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi - just joined the forum and I have a stupid question. I have a 2013 Cruze RS LT with the rally rims. Just got the winter tires taken off and the summers put on and I'm thinking that the dealer may have put on the wrong tires (I have the dealership do this and store the tires for me). The...
  17. Cruze Owner Projects
    I put carbon fiber vinyl over my bowtie's on my 13 LTZ. They turned out okay.
  18. Gen1 Appearance, Body, Detailing, & Interior
    I'm looking to replace my front and rear gold bowtie emblems with black ones. Does anyone make a black overlay? I also want to get an RS emblem for the front grill and to put next to the "Cruze" on the left trunk lid. Any help is appreciated.
  19. Gen1 Appearance, Body, Detailing, & Interior
    Cleaned the car Sunday, found these 'bubbles' on my bowtie...like the "chrome" is starting to peel away
  20. General Discussion
    Hai, I recently gotten my Cruze back from a body shop because I wrecked the front end. Everything checks out good but my bow tie, it's on but it's not on... It's sticking out as if it wasn't put on correctly.. I was just going to take it upon myself to just replace it but I don't know how to...
Top