Chevrolet Cruze Forums banner
brembo
1-6 of 6 Results
  1. Gen1 Wheels, Tires, Brakes, & Suspension
    Installed Brembo brakes yesterday on a 2012 Cruze. It's the kit that is listed for the Sonic. Since the Sonic and Cruze use the same calipers and rotors they bolted right up. The spacing for the caliper bracket was the same. Just had to remove the dust shield, and use a 15mm spacer so the wheel...
  2. CruzeTalk New Member Introductions
    I know that the disc bolt pattern is different 5x110 vs the Cruze 5x105. What I would like to find out is, is the caliper mounting hole spacing the same? I am OK with drilling custom holes for the disc mounting. But if the caliper mount is going to be an issue, I will have to rethink the swap...
  3. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anybody try this fitment ??
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    After speaking to a bunch of different brake companies Brembo, Wilwood, Baer, Stop tech etc, I've finally made a little progress with Brembo. Brembo did make some SEMA concept kits for GM, but they are just a mock-up so no go on those. They are looking into the viability of the Sonic kit fitting...
  5. Gen1 Wheels, Tires, Brakes, & Suspension
    Heres the PDF from Brembo : http://www.brembo.com/en/car/Racing/Street-products/Documents/GT-GTR-TURISMO-RACING PACK Application list 2011.pdf You can see a kit for 2012 Sonic of 328mm with 4 Pistons Calipers ! IF it fit on the Cruze, im ordering this soon...
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    Since Cruze shares most of it's steering/suspension and brakes with other GM cars (Delta and Delta II platforms) I've been looking at possible brake upgrade within the GM family. Looks like the Brembos from Cobalt SS might work and they are pretty cheap too. So getting the calipers, pads and...
1-6 of 6 Results
Top