Chevrolet Cruze Forums banner

cables

  1. Gen1 Powertrain
    Hey All, I am wondering if anyone has procedures for adjusting the shift linkage system for a manual 2011 ECO. I can't get the car into 1st gear at random times, and eventually do get it in if I pop it into reverse and or second, and then slide into first. I suspect that the bushings maybe be...
  2. Gen1 Brakes/Suspension Tutorials
    Tools needed: 7 mm socket Driver/ratchet with extension for socket Phillips head screwdriver Plastic trim pry tools (or tape coated screwdrivers) Pliers 19mm or 3/4 in. impact socket and regular socket (for the wheel covers if ya got em) 1/2 in. wrench or impact wrench 1/2 in. torque wrench 10mm...
  3. General Discussion
    Hello, Recently purchased a 2017 LT Hatchback, tires are 205 / 55 R16. On one Google search I found a Cruze manual that says WARNING Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes...
  4. Gen1 1.4L Turbo
    Hello all. I have a 2012 Chevy Cruze 1.4t with the m32 6mt. I was doing some routine check-ups on my cruze and noticed my shifter cables were kinda loose. Right where they snap onto the shifter assembly on the transmission. Is this how everyone's is? Or, are mine worn? I've noticed a little...
  5. Gen1 Audio & Electronics
    I have been working on a project which would interact with the canbus, however instead of risking my own car and ecu I was going to buy one off eBay and power it with a standard desktop power supply. However most of them don't come with cables and I really don't want to borrow them from my...
  6. General Discussion
    I dont know hoe to fix this problem. and i dont have enough money to pay for $100 inspections that come back with no results. While driving the car would continuously reboot the radio and the warning StabiliTrak light as well as the power steering warning will show up on the dash. the car would...
  7. Gen1 Powertrain
    Hello all; so we replaced the batter earlier this year. Our 2011 Cruze LT 1.4 turbo has about 65k on it, and been a good car. However, we have been having issues with the car starting lately. If we 'tap' the negative terminal with a crescent wrench a couple of times, the car starts. I thought...
  8. General Discussion
    HEy guys looking to get a tune for my car and I am looking at 2 diff options I know like 90% of people here have trifecta but I also found a company called vermont tuning Performance Tuning Products for Saab, Cadillac, Chevrolet, Volvo | VTunerPerformance - Performance Tuning for Saab, BMW...
  9. Cruze Parts
    Hi All- Since I no longer have the Cruze, I have 2 cables, yes two (got one with the tune) and my wife got me one too, just never returned the extra one. Decided to keep one in the car and one at home. With that said I'd like $75obo for the cable; I have PayPal so if you're interested PM me...
  10. Gen1 Audio/Electrical Tutorials
    This installation guide applies to both the 1.4L turbo and 1.8L engines available in the Cruze. The 1.4T is covered first, followed by a slight variation that is found with 1.8L installation (thanks to Smurfenstein for the 1.8 info/pictures!) This simple how-to illustrates how to install...
  11. Gen1 Audio & Electronics
    10 Black 4 Gauge Kits for $50 I am going to do a group buy for the Big Three Kits that i make and sell.I am doing this to start getting the product out for people to review and report.I personally have seen and increase in 2 MPG City over 2 tanks. As well as the other info stated in the link in...
  12. Gen1 Powertrain
    Were you interested in a Trifecta Performance Tune, yet you didn't want to buy a cable? Well now I'm offering rental and loaner cables. The service is pretty simple: For new purchases, a cable will be provided for you to upload and dial in your tune. There is no rental fee, and you only pay...
Top