Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. Cruze Parts
    Up for sale AEM Intake (Part#21-744C), comes with a new Spectre Air filter (cleanable) (comes with all the hardware and paperwork) Asking $150 US +Shipping MGP Caliper covers part#14232SCRZRD for first gen Cruze (set is front and back, Red with silver writing) used less than a summer asking...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    I have a 2014 2LT Cruze with rear disc brakes. Does anyone know if the 1st gen ECO wheels will fit on it without any rear caliper interference ?
  3. Gen2 Wheels, Tires, Brakes, & Suspension
    Greetings! I have a 2nd Gen 2016 LT RS and I'm looking to get some caliper covers to make it look a little cooler. I have the stock 16" wheels, but I can't find any caliper covers for 16s. They only seem to exist for 17" and 18" wheels. Anyone know if they exist for 16" wheels?
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anyone with access to a GM Parts Catalog know the part number for the bolts that hold the brake caliper bracket to the steering knuckle? I asked the dealer by my house and they refused to give me the part number. I also called a couple online parts suppliers and they also refused to give it...
  5. General Discussion
    Anyone ever used their products? If so; would you recommend, or something else?
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    2015 cruze I took both front brake caliper bolts out and then the caliper is supposed to pull straight off but it will not come off. It moves some but it feels like there is something still holding it in place. Am I missing a hidden clip or bolt that needs to be removed? Do I need to pry it...
  7. Gen1 Wheels, Tires, Brakes, & Suspension
    Who has replaced the front caliper bracket bolts when changing rotor's ? Did you reuse the bolts ? If not where did you find them.
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    Well it seems I have a new issue it seems, well yesterday I pulled into a parking lot I smelled hot brakes. So I got out & its my rear drive wheel when I bent down you can feel the heat hit you in the face. & sometimes you can hear the wheel squealing & when you press the brake it will quit...
  9. Cruze Parts
    New red caliper covers for Cruze $70 shipped New Red caliper covers for the front wheels. I purchased these for my wifes car a few years back, but never installed them. They are red with silver 'Cruze'. They sell new on CarID for $110. I will sell for $70 shipped
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    Okay guys, so I did the brakes on my Cruze and i noticed that even after changing the rubber on my passenger side caliper slide, it appears to stick. I see no marring or anything on the guide so I'm a bit confused here. Should I just swap out new pins all around since it'll take all of 5...
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    I have the ZZP bbk. Pads are garbage, and I am on my 3rd set of rotors which are once again cracked in so many places I can't believe they still sell the pad/rotor setup. So, with that said... I already know the hawk HB249F.575 pads work with the big brake kit and that it's meant for the...
  12. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anybody try this fitment ??
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    Found these on Ebay 12" Front Dual Piston Brake Upgrade for 2010 Chevy Cruze Sonic Cross Drilled | eBay but I would prefer to use a GM dual piston caliper, and rotor if I'm going to do it. Plenty has been tossed around about rotors and pads but I have found little about this. Has anyone used...
  14. Cruze Owner Projects
    Hello everyone. I am posting pics of the stock rims and calipers paint job that I completed a month ago. I had a hiccup with spray painting a little too far away from the rim the first go around and that set me back a couple of hours of re-sanding and painting. Well hope everyone enjoys!!!
    When you install aftermarket wheels with thin spokes brake calipers are often being exposed. Brakes get dirty and sometimes don't really look very nice. However you can dress up the calipers with special covers created by MGP. They are inspired by large sport brakes like Brembo and Baer, and...
  16. Gen1 Appearance, Body, Detailing, & Interior
    I'd really like to paint my calipers body color ( Tungsten Metallic ) and of course its an uncommon color so there's no caliper paint kits available. Anyone out there that could point me in the right direction? I don't have to have the exact color but close would be nice. If there really...
  17. Gen1 Wheels, Tires, Brakes, & Suspension
    hello a friend of mine as done the favor of breaking the caliper piston of my front left caliper. i need to get a piston for the caliper. does anyone know where can i buy one ore any product reference? ive found it in carid but i cant get any response from them. the brand they have is carlson...
  18. Gen1 Wheels, Tires, Brakes, & Suspension
    I'm having a blank at the moment. What is the long rod and round metal/plastic end component on the rear brake caliper called? For some reason my mind is thinking balance piston, but I'm not sure. Only the rear's have the component.
  19. Canada
    Auto Tronic - 1531 Warden Ave, Toronto, ON. Canada (647)825-8922 please book 1 day before coming } Rim painting{, Mat black or Semi-gloss color only 16" rims $200 for all four 17" rims $210 for all four 18" rims $220 for all four 19" rims $230 for all four 20" rims $260 for all four 21" rims...
  20. Gen1 Appearance, Body, Detailing, & Interior
    Painting plastic engine components and calipers today lime green from duplicolor : I also have clear but am looking for primer for engine components... It is plastic so prolly will get a fusion paint from the hardware store as far as applying this today does anyone have some pointers? How...
1-20 of 30 Results