Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 51 Results
  1. Gen 1 Tuning/Engine Modifications
    Hey all, I finally got the ZZP stage 1 cam along with springs. It most certainly different to drive and there seems to be some good gains there but I can’t get the rev-limiter to go past the stock setting. ZZP forgot to change the settings but then I got a tune with it raised, but something is...
  2. Gen 1 Tuning/Engine Modifications
    I’m about ready to drop the hammer on the stage 1 cam from ZZP, new spring, retainers, etc For those of you who have done this or replace the stock cams, what specialty tools do I need to do the installation? I read different things about GM timing kit is needed, I just want to make sure when...
  3. Gen2 Audio, Electronics & Electrical
    Hello, I am having a problem with my Dash Cam turning off when Auto Stop activates, then turns back on when the engine turns back on. I have it hardwired to the fuse panel under the radio. I believe its plugged into the radio fuse. What does anyone have their hardwired Dash Cam plugged into...
  4. General Discussion
    Hi Guy i just want to thank you in advanced i need to replace my 2013 1.6 cruze intake camshaft gear part no 55567049 and i ordered it from the USA and when i wanted to replace it it had a different part number 55568386 (looks like its for the 1.8 cruze as they dont have the 1.6 in the Usa in...
  5. Gen2 Audio, Electronics & Electrical
    I've been looking into buying a dash cam for my 2016 Cruze Premier. The dash cams that have good reviews are expensive and big (ie: noticeable). My car has a rear view camera that works just fine when I shift into reverse, but I think it also has a front camera that keeps me from switching...
  6. Gen1 Audio, Electronics & Electrical
    So...i've had some 40yr old child throw a tantrum and vandalize my reverse camera so its totally scratched so im looking for either an OEM replacement (just the camera part) or if possible is there a better camera as far as picture quality? Thanks ya'll
  7. Gen2 Audio/Electrical Tutorials
    Jump to post 13 for the tutorial Hey everyone! I have had my 2017 Cruze for about a month, and am looking to "permanently" install my dash cam. It is a N2 Pro. I purchased a Vivocation Vico-plus, as I have heard it's the best at preserving battery life whilst offering parking mode. The...
  8. Vendor Spotlight! Great Deals for Members
    We've found another solid deal, but time is super limited on this one! The Vantrue N2 Pro Dash Cam is packed with features including 1080P recording quality, front and cabin-facing cameras, infared nightvision, motion-activated parking mode, and more. Regularly priced at $199.99, it's marked...
  9. Gen2 Audio, Electronics & Electrical
    I tapped into the overhead map lights. They are hot when the car is on and go cold 10 minutes after you leave the car. Once you pull the harness controlling then lights, add the ground to the black wire in the left and hot wire to the wire on the right. Tape them together, stuff the extra wire...
  10. General Discussion
    Hi I'm hoping for some ideas or maybe even someone who knows abiut a certain app I'm looking for. I have installed an android system in my cruze along with a camera. I'd love to be able to record my journeys behind the wheel, but without doing it manually everytime I start the car. There are a...
  11. Gen1 Audio, Electronics & Electrical
    I have a '14 cruze that I added a MyLink to. My harness from radio to the body has all the camera wires in it but I need to swap out the wire harness trunk side so I can plug and play my camera. Anyone who has a OEM MyLink with backup Cam can you please tell me the part number for the wire...
  12. Gen1 Audio, Electronics & Electrical
    Hi, Just bought a dash cam and looking to mounting it in right behind the rear view mirror. I was thinking of routing the USB power cord up inside the roof towards the passenger pillar arm (behind the plastic cover) through the glove compartment and to the 12V power outlet. Just wanted to...
  13. General Discussion
    I have a 2014 1.8 Cruze with 49000 on it I was changing the oil and noticed the cams looked interesting I don’t know if it is normal or not for it to look worn at the cam lobe. If anyone could let me know that would be great.
  14. Gen1 Appearance, Body, Detailing, & Interior
    Looking into 2 channel dash cams for all of my vehicles after Two accident within a year my wife got into but wasn't her fault and got screwed on both of them because of no witnesses. Neither had insurance anyways but........ I don't mind putting down the cash as long as it's good quality. Ive...
  15. Gen1 Audio, Electronics & Electrical
    Hello folks. I'm trying to find out which fuse location is a constant 12v so that I can hook up my dash cam and have it remain on/powered even while the car is off. I have seen several different how-to articles that show using a fuse tap with fuse 6/7, but the wiring I have already has a fuse...
  16. Gen1 Audio/Electrical Tutorials
    Hi Guys, For those of you that want to know how to install a fuse tap and wire your dash cam up neatly, I put this together. Hope it helps someone. Items required: 10 mm socket Crimper 12v socket Ring Terminal Spade Terminal Disconnect Terminal Butt Splice Connector 18 guage spool of black...
1-16 of 51 Results
Top