Chevrolet Cruze Forums banner
camshaft
1-14 of 16 Results
  1. Gen2 Powertrain
    I'm looking at cam upgrades for my 2017 hatch and I can't find anything specifically for it, anyone know of cams? I've mostly looked at ZZperformance and they have no options for the 1.4L turbo
  2. Cruze Parts
    Hi I am selling a chevy cruze intake camshaft gear/actuator .I have orderd this part from the USA but when i stripped my car to change it i realized that mine was the 55567049 im not sure if i can use it on my Chevy cruze 1.6 LS thats why i want to sell it so i can get the correct one does any...
  3. Gen1 1.4L Turbo
    No vacuum leak was detected after filling engine with lots of smoke at 3 psi. Then why the low vacuum reading on the gauge? And why the high Long Term Fuel Trim? Perhaps ECM is advancing timing too much due to faulty data from one of sensor data streams the it uses to control camshaft position...
  4. Gen1 1.4L Turbo
    So my 2013 Chevy Cruze LTZ W/107,000 miles very recently started losing oil(1 quart over 6 months) and coolant as well as idling very poorly. And most recently the oil dipstick has had ALOT of negative pressure on it to the point if I pull it out it doesn't stutter and then quickly bounce back...
  5. Gen1 Powertrain
    Looking at this on amazon for my 2015 Chevy Cruze LT Genuine General Motors 55573746 -...
  6. Gen1 1.4L Turbo
    Hello, I have a 2015 Chevy Cruze 1.4T. I was wondering, I removed my valve cover and found a lot of sludge. Would it hurt anything for me to pour that cleaner on to the bearing caps and shafts to try and clean some of it out? I used some carb cleaner, I have the drain plug out of the oil pan...
  7. Gen1 Powertrain
    Hey guys like the title says, my check engine light is on in my 2014 LTZ and the thing barely starts, if at all. I waddled it to Autozone where they pulled the codes and they were for the Crankshaft Position Sensor and Camshaft Position Sensors A and B. Car only has 48k miles on it. It...
  8. Gen1 1.4L Turbo
    Chevy cruze had engine light on and rough idle. I replaced the camshaft cover due to pcv valve bad. Soon as i drove the car around their was oil leak passenger side all over left side around belts, alternator. I know the valve cover is sealed. Any one has dealt with this? It only leaked oil soon...
  9. Gen1 1.4L Turbo
    It's been in the 20's here and the first time I run my car I can smell burning oil. Just noticed lol all over the front of the engine but I haven't had a chance to figure out exactly where it's coming from. Here's some pics.
  10. Gen1 1.8L
    Hi folks, first post here. I have a '11 Cruze LS with the 1.8L and manual transmission. I love this car, it's been great to me. I've got 122k miles on it now and just got he check engine light with error P0011 for Camshaft Timing Over Advance. Everything I've researched about this issue seems...
  11. Cruze Parts
    Updated Camshaft cover with all bolts + gasket, Brand new right out the box still in the bag. Local pickup only, NE Ohio. ill meet halfway. 40$.
  12. Gen1 1.6L & 1.6L Turbo
    Dear all recently I accedently broke this little part (picture 2) from the camshaft intake of my Chevy Cruze 1.6 ls 83kw 2010 year. Can you tell me the name of this part (picture 1) of the camshaft intake and send me the link where I can buy it because changing the whole camshaft intake in my...
  13. Gen1 Powertrain
    I own a 2013 Chevrolet Cruze 1.4T with about 75,000 miles that I bought new. Last week it stalled out while I was at a stop light and I have to get it towed to the dealership. They found the camshaft to be frozen and wanted to tear down the engine to find out why. I agreed to it and it would be...
  14. Gen1 Engine/Transmission Tutorials
    How-To: Replace CPASV (Camshaft Position Actuator Solenoid Valve) Seals Overview: Yes, I needed to make up an acronym for this one. Moving forward, let's just refer to them as CPASV seals. I found these seeping on my 2012 Cruze at 58,000 miles when I noticed a slight oil loss (about 4oz in...
1-14 of 16 Results
Top