Chevrolet Cruze Forums banner
clamp
1-7 of 7 Results
  1. Gen1 1.4L Turbo
    Just got a turbo under boost code a couple days ago, peeked around under the hood last night looking for loose clamps and boost leaks. Noticed my turbo moved around a lot when I pushed on it...Removed heat shield to find my v band clamp that secures the turbo to the manifold grew legs and ran...
  2. Gen1 1.4L Turbo
    All, The upper radiator hose on my 2012 1.4L (109K miles) has a hole in it where it looks like it was rubbing on a wiring harness (this is about 3 in down the hose from the water outlet). For the life of me I cannot find out how to reach the bottom clamp? Does this require removal of the...
  3. Gen1 1.4L Turbo
    Gents, DDM Short shifter showed up yesterday and I will be installing this weekend. Stand by for pictures and updates. My questions is.... Do you know why the ZZP or BNR cable clamps can not be used on the Cruze transmission. I can't tell what the difference is from my online research. Thanks...
  4. Gen1 1.4L Turbo
    I was checking out under the hood last night to make sure all is well since I did the PCV fix and the coolant outlet/recovery tank house and flush last week. I noticed that the clamp for the lower passenger side intercooler pipe is broke, but no leak. Here is a pic you can see the rusty clamp...
  5. General Discussion
    Does anyone know what this piece is called? Was searching for it online but don't know what it's called won't clampdown anymore
  6. General Discussion
    Hello all again wanted to ask and address this and see if anyone came across this...any insight would help with my issues...or worries...I bought Pepe first of Dec...When I picked up delivery the first thing, I got into car to drive it off lot and the check engine light popped on...they just...
  7. Gen1 1.4L Turbo
    After installing the ZZP downpipe / mid-pipe I noted some really wacky fueling and reduce mpg. I found the vband clamp was completely loose (spinning with fingers). I lifted the car and loosened the cat flange bolts and the muffler bolts. With the V-band loose enough to still let the pipe...
1-7 of 7 Results
Top