Chevrolet Cruze Forums banner
code
1-19 of 289 Results
Advanced
  1. Gen1 Powertrain
    2012 Cruze 1.8 liter engine. Transmission Solenoid malfunction. The car throw code while driving down interstate. Car drove for another 30 minutes without an issue until we could check the code. Can you replace the solenoid without replacing the transmission. I only $2500 on the car. Should I...
  2. General Discussion
    What do engine light codes 7e8 & 7ea mean
  3. Gen1 1.4L Turbo
    2014 Cruze 1.4L: 76k , all orig besides tune Brand new NGK BKR7E Gapped at .028 New Ignition Coil (Delphi) Throttle Body cleaned Intake PCV bypass done Cam cover replaced twice, about 1.5 years ago, bolts were checked at 79in lbs of torque. Also checked vaccuum distribution for leaks Need help...
  4. General Discussion
    Good afternoon. I’ve been looking for help all over. I own a 2016 Chevy Cruze Limited LT. After a day long road trip, my check engine light popped on for this first time since getting the car in 2017. It shows code p0171, system too lean bank 1. Autozone said it’s the mass air flow sensor but I...
  5. General Discussion
    Hi Everyone, I have a 2012 Cruze 1.4l turbo with 51k miles. This morning when I turned it on, I got the check engine light on. On my way to work I didn't notice anything different on acceleration, idle or anything. So I stopped at a local parts store to check the code and they gave me code...
  6. Gen1 Service Issues
    So my car started throwing codes. PCV, knock sensor, cylinder 4 misfire. Each one taken care of as it came up. Now it's throwing the same codes again. Dealer wants to charge me $115 just to look at it! Such BS! Its a '14 with only 56K miles. Beyond pissed!! :RantExplode: ETA-Cleared the knock...
  7. Gen1 Diesel General Discussion
    I have a 2014 CTD with 103,000 miles that started throwing a P249E (powertrain) code and a "check engine" light a few weeks ago. By way of background, the DEF heater was replaced about 2 years ago @ 55K miles and a NOX sensor recall was done about 6 months ago. The car has been running fine...
  8. General Discussion
    Hi everybody, I hope that someone can help me. I have a 2012 1.6L petrol chevy cruze and i am experiencing some problems. When i switched on the engine, service light and engine light came ON and Error code 84 appeared on the screen. Also, the engine was not running like normal (an irregular...
  9. Bad News Racing
    Hello. Just got my bnr handheld and have read the instructions I have plugged in my handheld turned the key just before the engine starts and selected read 1 but I am getting a code right after pressing it code $0311 I am unsure how to fix it thanks for any help.
  10. Gen1 Service Issues
    Hello, everyone, just had a CEL come on my 2012 Chevy Cruze 1.4L Turbo. Used a code reader and it said P0171 and P0496 which I guess reads to lean and and issue with the EVAP system. After reading some posts on similar issues (everyone here seems to be a great resource and wealth of knowledge)...
  11. Gen1 Service Issues
    2012 Chevy Cruze 1.4 Turbo. Car Car overheated and I found a leak from the water pump so I replaced the water pump and replaced the thermostat. Car works fine for a couple days then starts to heat up again. fan is working fine not sure what to check next any idea? Bought the car used a couple...
  12. General Discussion
    Hi, I am wanting to buy some touch up paint for a couple of small chips on the hood of my Cruze, but I cant seem to find the color code on the label, I found three different tones of red, I just want to order the correct one. Can anyone point out the color code on glove box label attached? THanks.
  13. Gen1 1.4L Turbo
    I have reset and every time the check engine light comes on. States P0299 code pending. Approx 183,000 miles on it. I still have the original turbo and replaced the oil feed line 2 weeks ago. I have some questions for everyone: Is there something else that may fix the issue besides replacing...
  14. Gen2 Service Issues
    P0420 This is a permanent code cannot be cleared with code reader. Will only clear if system decides problem no longer exists. I used CRC Intake valve cleaner as directed after one week I re-scanned problem has now gone away. My conclusion is that dirty valves were causing said code.
  15. Gen1 Service Issues
    On Mach 5, 2019, error code "P0597" popped up on my 2011 Chevy Cruze LTZ. Code went away after that. My garage (I'm out of warranty here, btw, because my car has just over 152,500 miles on it after being bought in late 2010) looked at my thermostat but could detect nothing wrong nor error code...
  16. Gen1 Service Issues
    Engine light came on for P0171, I found the vacuum regulator in the cam cover hissing. Also found oil build up around CAC ClAmps and oil in the intake piping, check complete PCV system. Check valve in intake manifold is intact. When blowing into corrugated hose off intake manifold it blows...
  17. Vendor Deals
    The Promo Code BIG15 Adds Additional 15% Savings Site Wide (On Top Of 60% Clearance Too!) Discount Ramps—contrary to their name—offers a wide range of automotive cargo hauling equipment, and running alongside their massive clearance sale (markdowns up to 60%), they've offered up an additional...
  18. Gen1 Audio & Electronics
    I've got a 2015 Chevrolet Cruze that recently had the catalytic converter replaced. Everything has been fine with the car, but the CEL keeps coming back on for the catalytic (P0420) and the shop just called to say that the catalytic is running within the correct range and so are the 02 sensors...
  19. Gen1 Appearance, Body, Detailing, & Interior
    Hey so due to hitting a deer, I am going to replace my hood. I found this hood about 200 miles away for $150. No visible damage from pictures sent to me and it will be cheaper than getting it fixed. I drive a 2011 Chevy Cruze, and the hood is from another Cruze from the same year. My paint code...
1-19 of 289 Results
Top