Search Results for ‘corrugated’

Does anyone know if the corrugated hose that snaps onto the top of the intake manifold is supposed to be air tight? I recently replaced my intake manifold but the hose connector is wanting to slip a little up and down and it wants to suck air in. Can't figure out what I am missing. Thanks Cruze...

Hi, I have the p0171 code (again) and want to rule out the corrugated hose that runs from the intake to the turbo inlet as the cause. Just wondering if someone here has already done a write-up on how to remove and test this hose. I know how to remove it from the intake end ( thanks XR) but not...

Just a few days ago I performed the external PCV check valve mod. In the process, I didn't get the PCV hose on securely at the intake manifold and ended up with a CEL and vacuum leak a few days later. In the diagnosis process I broke that hose near the intake manifold. This corrugated...

Good evening. Tonight, I decided to pull off my PCV corrugated hose to see if my check valve still exists. It does, however I stupidly can't figure out how to reinstall the corrugated hose. When I took it off, a rubber o ring and plastic washer came out. I have tried to put them back in, but...