Chevrolet Cruze Forums banner

cowl

  1. Gen2 Wheels, Tires, Brakes, & Suspension
    Does anyone have a diagram/manual or jsut simply directions on how to remove the plastic cowl on a 18 Hatchback. I am needing to access the top strut bolt to remove the strut to finish swaping out the front OEM springs to the Ebiach springs.
  2. General Discussion
    The grey colored foam attached to the bottom of the cowl inside the engine compartment was coming lose. I reapplied it using 3m trim adhesive where it was falling down. What is the purpose of this? Is it just for coolant odors, or even s it for much more?
  3. Gen1 Appearance, Body, Detailing, & Interior
    Just wondering if anyone else has noticed this or is it just me . When i wash my car i noticed that the water in the wiper cowl on the passenger side does not drain out i have to soak it up with a towel the drivers side runs straight down. Why didn`t they put a drain on the passenger side in the...
  4. Gen1 Appearance/Body Tutorials
    Third times a charm. Okay, I figured since there wasn't a thread on this, why not do the honors. The process of this was pretty simple really. Tools needed: 10mm socket 15mm socket 3/8" ratchet Interior trim removal tools (These are the plastic nylon type). I recommend using these to prevent...
  5. Gen1 Appearance/Body Tutorials
    Since there wasn't a thread about this i figured i would do the honors. Tool needed: 15 mm deep well socket 10 mm deep well socket 3/8 ratchet and extensions if you choose Interior trim removal tools. (These are plastic nylon type) Beverage of choice Rock music:). I made sure the pictures I...
  6. Gen1 Appearance/Body Tutorials
    Okay here it is. I figured there wasn't a thread on this topic, so I did the honors.
Top