Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. Gen1 Audio, Electronics & Electrical
    I have a 14 Cruze with the Pioneer upgrade. Sounds great and have been happy with it for the past two years. The issue I have is the rear deck rattles horribly. What are you guys doing to remedy that issue?
  2. Gen2 Audio & Electronics
    I am starting the install for my son’s 2017 Cruze. The system is an NVX 1200.1 amp pushing 2 Sundown SA 10’s. I will then have an NVX 800.4 for the front stage and rear stage. The front stage will be Hertz Milli Pro 6.5’s. Everything will be running through an Alpine DSP. I am trying to decide...
  3. Gen2 Audio & Electronics
    I have a 18 premier sedan with standard 6 speaker audio without the rear deck speakers. What’s the best way to add 6x9’s to the rear deck? Should I delete the rear door speakers and tap into the rear door speakers? Also is there a mount available for the rear deck speakers? Tia.
  4. Gen2 Audio & Electronics
    Does anyone know where I can get rear speaker mounts for 6.5 speakers for the Gen2? I’ve search a few websites without any luck .Thank you in advance.
  5. Gen1 Audio, Electronics & Electrical
    I just bought a 2013 Cruze that has the Pioneer system. Looks like the previous owner replaced the rear deck speakers with Rockford’s but I am looking to go back to stock because in my opinion, stock speakers sound better with stock amp power and I things factory original. Does anyone have a...
  6. Gen1 Audio, Electronics & Electrical
    Was wondering if anyone has any pics of their amps and subs mounted under the deck in the trunk. Id like to make something for my amp and sub. That looks good. Not just up there with metal brackets. Please se post up pics if you have. I searched. Didn't find anything.
  7. Gen1 Audio, Electronics & Electrical
    Anyone know where I can get connectors to use my stock my link back up camera for my aftermarket deck? Thanks
  8. Gen1 Audio, Electronics & Electrical
    Hey everyone, I have a 2011 Chevy Cruze LTZ, I recently bought a after market deck from a friend and installed it, deck turns on but I have no sound throughout the entire car, nothing through the speakers chimes included. I do have the upgraded Pioneer system (I didn't know this forum existed...
  9. Gen1 Audio, Electronics & Electrical
    I am looking to install a Pioneer AVH-4100NEX into my car. I currently have the MyLink system with a backup camera. I am wondering if there is a way to utilize the currently installed camera with this new head unit.
  10. Gen1 Audio, Electronics & Electrical
    I have the basic radio and want to add 2 rear deck speakers. Is the wiring already there or do I have to run additional wiring?
  11. Gen1 Audio, Electronics & Electrical
    I'm planning on doing some audio work on my car and was wondering if anyone can point me in the right direction as far as aftermarket stereo dash kits. I'm looking to put in a delco cd/cassette deck. Might even throw some subs in while I have everything apart.
  12. Gen1 Audio, Electronics & Electrical
    I won't get into all the other random failures this respectfully driven and maintained vehicle has experienced in the past 12 mos (2012 ltz 6at rs) but yesterday the misses comes home and tells me the car is making two strange sounds as of this morning. One she mentions the hvac blower seems...
  13. Gen1 Audio, Electronics & Electrical
    I searched for a thread to ask in but didnt find one. One thing lacking in the cruze is the sound quality in rear seat. This isnt a problem until you sit back there. My question is this. Can I add the factory 6x9's out of a 2010 cobalt to the rear and will they sound good? I am worried that...
  14. General Discussion
    Need help locating info on rear deck RR for Speaker and Led install. I have looked every place I could think of with no success...any chance 1 of you fine peeps could post up a link?:grin:
  15. Gen1 Audio, Electronics & Electrical
    Hi there Just got my radio installed to replace the factory setup. Shop did a nice job, but I noticed on the way home just now that there are no lights on the vent controls, I have nothing blowing out of the vents (heat or cold) and I can't control vent speed. What am I missing? Is there...
  16. Gen1 Appearance, Body, Detailing, & Interior
    Anyone know how to remove the cover? I want to remove the tint on the back window and it would make it easier if I could take it out. **** tinting and safety check laws are strict here in hawaii and I'm gonna get my car retinted. I was just gonna let them remove the old tint but they want 200$...
  17. CruzeTalk New Member Introductions
    My Newbie Introduction - with pictures! Hey there! My name is Viridian, I'm 18, and I've had my 2013 Cruze LS since November of 2012. I knew when I first got it that I'd slowly upgrade it into something sexy and classy at the same time. Starting in late 2013 I started upgrading my Cruze to my...
  18. Gen1 Audio, Electronics & Electrical
    Hi Guys, Just a quick question in regards to the door chimes and various alerts from the car. I've read a few threads on this and how these are routed through the front speakers (yay) sounds super awesome, and not something I've encountered yet with Australian cars. I have quite an extensive...
  19. Gen1 Audio, Electronics & Electrical
    I have a 2014 LS, and I want to hook up my little 10" sub, i've always hooked subs up to an aftermarket deck with sub-woofer out on the back of the deck. What are my options when it comes to splicing into speaker wiring or something along that line? I know ill have to get some sort of a...
  20. Gen1 Audio, Electronics & Electrical
    Hey All, Forgive the newb question but I have a Kenwood Amp and Sub from a previous car install that works great. I know I would need to buy a new wire installation kit to run it to the deck, but my question is: Can I use the existing Factory Deck(I have the Pioneer GPS Dash) with...
1-20 of 31 Results