Chevrolet Cruze Forums banner

diffuser

  1. Gen1 Appearance, Body, Detailing, & Interior
    I bought a rear diffuser on eBay for my 2014 Chevrolet Cruze, this one pictured here. And so time passes and it comes all the way from Korea only to find out it is the shittiest plastic I've ever come across. Rather than thick ABS type bumper/ accessory plastic, its more like children's...
  2. Gen1 Appearance, Body, Detailing, & Interior
    Cleaned some snow off and noticed the turn signal diffuser must have fallen off?? and was actually sitting inside the headlight compartment. Just bought the car used a month ago, never noticed it before. Now wonder if it was assembled wrong at the factory. Might be able to fish out the reflector...
  3. CruzeTalk New Member Introductions
    Hi all, I'm new here,I'm in South Africa and I have a 1.8 LS 2012 cruze hatchback , currently on 120 000KM , I have been enjoying driving this car for 5yrs so far, no problems. Can anyone assist me in getting the rear bumper diffuser for a hatchback (highlighted in yellow on the attached...
  4. Gen1 Appearance, Body, Detailing, & Interior
    Just needed to know if a diffuser made for one model will fit the other. I contacted a reseller and they said a 2011-2013+ diffuser would not fit a 2014. I thought that part of the body was the same. (Non-RS)
  5. Gen1 Appearance, Body, Detailing, & Interior
    Since I purchased my cruze this a project I have wanted to take on. Over the past month I have been making and fitting templates and finally welded up a prototype. Several years ago I had an 04 GTO and installed a diffuser from difflow.com, pics of my car still on their site (red one) also a...
  6. General Discussion
    Hello I'm new here & decided to create this account while I wait until Thursday for my first Cruze! I have one issue with this vehicle & it is the exhaust tip.. Id like purchase a new exhaust tip & I don't want it angled or facing down (like the stock tip) So I have considered purchasing a...
  7. General Discussion
    Hey , I currently have a 1.4t ltz RS and i wanted to add a dual exhaust system but i cant seem to find any diffuser that fits the rs package so im starting to think their isnt any, so what if i purchased a regular eco bumper and swaped it out? and then put the diffuser? or does anyone have a...
  8. Gen1 Appearance, Body, Detailing, & Interior
    I have the 2013 Korean model Cruze with the facelift, and I am having difficulty finding a rear diffuser that fits The area for the insert on the bumper is definitely longer than the american and RS versions..about 56 inches at its longest here are some pics of my model cruze: I have...
  9. Gen1 Appearance, Body, Detailing, & Interior
    I am looking at a diffuser on ebay but I am not sure if it will fit a 2011 LTZ Cruze (no RS). It says 2013 Cruze and has the Korean front bumper as reference but honestly the rear bumper doesn't look any different than what I have. :grin: I am new so here is the text for the link...
  10. Gen1 Appearance, Body, Detailing, & Interior
    So I finally got off my butt and took care of two things that have been bugging me for a LONG time, like, ever since I bought my Cruze long. Driving up behind any Cruze and you see this: (Over exposed to show the shadows) Not only is the lower center section of the rear facia not painted...
  11. Gen1 Appearance, Body, Detailing, & Interior
    You may buy this piece somewhere. Thank you .
  12. Gen1 Appearance, Body, Detailing, & Interior
    Hey all, I just bought myself this diffuser off ebay and it arrived yesterday. I'm wondering, for those that have it, what exhaust tip you went with or if you just did a whole new exhaust. I can't mount it until I figure out the tailpipe issue or it'll look quite odd. Thanks
  13. Gen1 Appearance, Body, Detailing, & Interior
    I know there are a ton of threads but I havent seen this rear diffuser installed on a Cruze. My question is..... it looks like the middle part comes down and the im not sure of how the gap will look or how it fits. Anyone have any pictures of it installed? My main concern is I got rear ended and...
  14. Gen1 Appearance, Body, Detailing, & Interior
    I'm looking at a rear diffuser that fits 2013 but the eBay ad did not say anything about previous years (2011 in my case). Does anybody know if this will fit on my 2011? The rear bumper does not look any different compared to mine. Here's the link to the ad I'm talking about. Any help is...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Hello everyone, I have had my Cruze for less than a week and it is a heck of a car. When browsing online for some affordable modifications I could make to it to set it off from the rest of the Cruzes I see on the road, I saw the Chevrolet Cruze rear bumper Dual diffuser on eBay. Chevy Cruze 11...
  16. Gen1 Appearance, Body, Detailing, & Interior
    Hey guys just had a question about adding the holden rear diffuser to my car. I have a 2013 Cruze 1LT with the RS package. Would i have to change my rear bumper to the non RS package one to make this work?
  17. Gen1 Appearance, Body, Detailing, & Interior
    I'm real busy with college but was able to do this over last weekend. Looks much better and easy to do. Did this between 30 - 45 mins. This Cruze will be fully dipped sometime this winter or spring. Was going to add Mercedes-style Rear Diffuser but didn't like the fitment and the thought of...
  18. Gen1 Diesel General Discussion
    has anyone tried putting a rear diffuser on the CTD? specifically, because of the placement of the tail pipe, would it even fit correctly, or would the tail pipe show below it? This is under the assumption that the CTD tail pipe placement is different from the gas one...please correct me if im...
  19. Gen1 Appearance, Body, Detailing, & Interior
    I have a 2013 cruze LT and was wondering if any of you guys tried this on already, i think it looks **** good: GM Daewoo Chevrolet Cruze 2009 2011 Rear Diffuser Black Matt Single OR Dual | eBay Also, any reviews or comments on the quality/fitment of this lip kit? FIT Chevrolet Cruze 11 12 Type...
  20. General Discussion
    Tint all around 20% tomorrow then install vent shades once I can roll them down. Tell me what you think!!
Top