Chevrolet Cruze Forums banner
dimensions
1-13 of 13 Results
  1. Gen1 Appearance, Body, Detailing, & Interior
    I would like the dimensions of the Gen I Cruze, the Gen 8 Malibu and the Gen 3 Challenger Hoods. Vehicle Dimensions (Domestic & Imports)
  2. Gen2 Diesel General Discussion
    I am looking to do a diesel swap into a project car and interested more in modern engines vs "antiquated". Also the fact of US availability is a big plus if needing spare parts, etc. I am asking for someone with a Gen2 Diesel to be so kind and to yank out a measuring tape and take some rough...
  3. Gen2 Wheels, Tires, Brakes, & Suspension
    Does anyone know the outer and inner dimensions in mm (millimeters) of the bowtie wheel center caps found on the 18 inch Gen 2 RS wheels?
  4. Gen1 Audio & Electronics
    So I just got a single Sundown Audio SA-12 installed and within a few days the cheap prefab I bought as a placeholder already got destroyed (baffle separated and ripped apart in multiple locations). Really amazes me considering I'm only pumping 650W rms to the sub (300W~ max output with...
  5. Gen2 Appearance, Body, Detailing, & Interior
    Now that we have a few hatch owners on here, I was curious what kind of dimensions we're talking about for interior storage, as far as LxWxH with the seats folded. I was planning to get a Diesel Colorado, but quite honestly, if I can fit enough **** in the Cruze Hatch, I'd much rather spend...
  6. Gen2 Appearance, Body, Detailing, & Interior
    It looks like the hatchback is landing at dealerships, but online it looks challenging to find dimensions and specs. I'm interested in headroom for the drivers seat, vs. GEN1 and GEN2. Does anyone know if the tech specs are published for the hatch yet? I even looked at GM fleet, and I...
  7. General Discussion
    Does anyone know the dimensions on the push retainer found on the plastic fairing near the front wheels? similar to this for a toyota Amazon.com: 7mm Hole, 20mm Head, 8mm Stem Toyota Push In Rivet (Qty: 25) Gripper Box # 2146T: Automotive
  8. Gen1 1.4L Turbo
    Working on putting this engine in a Lotus Seven race car frame and could use some preliminary dimensions of the engine. I cannot find them anywhere on line. I need: Height: from bottom of oil sump to top of valve cover Height: Center of crank pulley to top of valve cover Length: from...
  9. Gen1 Appearance, Body, Detailing, & Interior
    Check this out! New Duraflex Product! Chevy Cruze Gt Racing Body Kit - Cobalt SS Network
  10. Gen1 1.4L Turbo
    I just picked up a 2012 Cruze 1.4T for a commuter car. I don't plan on really messing with it much because I've never really been a fan of trying to get lots of power out of front wheel drive cars....nonetheless, I'd like to know exactly what is under the hood lol. I've done some searching and...
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    is there a way that i can get the sizes for all the rims offered on the cruze from factory? im looking for the rim height and rim width i currently have the chrome multispoke eco wheels that are 17x7 so i would like to find out the dimensions for the steelies, LT, and LTZ wheels
  12. Gen1 Appearance, Body, Detailing, & Interior
    Hi all, I'm looking at getting a set of these: Foot Fuel Brake AT pedals Plate Cover For Chevy CRUZE 2009 2010 2011 2012 | eBay. Problem is, because the US version has a different throttle pedal shape that bulges out in the middle, it won't fit properly. However I do believe the brake pedal...
  13. West
    I know this is very last minute. But, we can't have an open house here without having our Cruze family around. I would love to see everyone come out, if you have any questions or need directions please PM me, call me or email me anytime! You are not going to want to miss this!!! *FREE...
1-13 of 13 Results
Top