Chevrolet Cruze Forums banner
disc
1-20 of 30 Results
  1. Gen1 Wheels, Tires, Brakes, & Suspension
    Just noticed some very abnormal and sudden front passenger side brake pad wear on '12 Eco. Both driver side pads still has maybe 8mm left but passenger side outside pad is almost gone (inside pad not too bad...see pics below). Only thing I've done recently was pressure bled the brakes using...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    When I picked up my Diesel last Friday 2/02/18, I was staggered to find the brakes were interestingly warped, and pulsed badly. The rears seemed moreso. Anyways, when I got to work on Saturday morning one of the service advisors noticed a ring of rust around the rear rotor. About a 1/2" on...
  3. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi all, I have a 2013 LT with rear disc brakes. I saw my right rear disk starting showing rust and I was going to replace the discs and pads because I am a little over 50,000 miles. What I ended up finding out is that the rear right pads are worn out badly, while the rear left pads look almost...
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    I have a 2014 Cruze with rear drum brakes can disc conversion be done easily I don't have the extra link on the suspension can that be added also I think it's called a z link
  5. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello, I am new to this forum! To start off, back in April of 2015 I had my brakes serviced. They put on new rear brake pads (I have four disc brakes). The car had about 30,000 miles on at that point. Fast forward to April of 2016 (a year later), I notice that when I am braking at slow speeds...
  6. Buy/Sell Classifieds
    Looking for a rear disc conversion kit. Or if anybody can point me in the right direction. Also interested in downpipe, intercooler, roof rack, exhaust, tuner. Thanks in advance!
  7. CruzeTalk New Member Introductions
    I know that the disc bolt pattern is different 5x110 vs the Cruze 5x105. What I would like to find out is, is the caliper mounting hole spacing the same? I am OK with drilling custom holes for the disc mounting. But if the caliper mount is going to be an issue, I will have to rethink the swap...
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey guys, I've got a 15 Cruze LT1 with the crappy drum brakes on the rears... Has anyone done a conversion and if so, how did you do it?
  9. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi Guys: I replaced the front disc pads and hardware kit on my 2012 Cruze at 70,000 Miles . In addition I had the rotors turned to give me a clean start with the new pads. When I finished the job, I found these two small (what appear to be) clips on the garage floor. See attached photo. Any...
  10. Cruze Parts
    Got two sets on ebay ( I have 3 Cruze's...) and I only used one set. (dealership warrantied one of my cars with new factory brakes). Will part with my spare set for $130 picked up (north of Milwaukee WI) or SHIPPED Ebay rotors from R1Concepts. I've used them on several cars in the past and...
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    How long have you guys went on the stock front disc brakes on the 1.8 before needing them to be changed? Thanks.
  12. Gen1 Wheels, Tires, Brakes, & Suspension
    New here. Has anyone tried to convert the drum brakes to disc brakes on the rear?
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    I have not checked my pads for @ 5000 miles but how long have your front disc pads lasted in mainly city driving. I am interested in cars with the disc drum set up. It is better after I adjust the rear drums I am at 32K and thinking about replacing pads? I have been feeling that my braking...
  14. Gen1 Wheels, Tires, Brakes, & Suspension
    So, I've got rear drums (sad face) and would like to do a rear disc (happy face) conversion. Anyone done this? Something I can do with a handful of OEM parts?
  15. Cruze Parts
    Got two sets on ebay ( I have 3 Cruze's...) and I only used one set. (dealership warrantied one of my cars with new factory brakes). Will part with my spare set for $120 picked up (north of Milwaukee WI) Ebay rotors from R1Concepts. I've used them on several cars in the past and never had an...
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    First question, has anyone done a rear disc conversion on these things? Not really interested in the performance aspect(although it is a plus) but with my wheels, the drums just look out of place sitting there. I'd imagine it would require a proportioning valve from a Cruze with Discs as well as...
  17. Gen1 Wheels, Tires, Brakes, & Suspension
    I'm starting to look for new fronts brakes as I'm about to pass the 30K mileage point. Anyone heard of disc italia brakes? I did a google search and found a lot of positive reviews with Chrysler people. Any suggestions for ceramic pads? I'm not a fan of EBC as I have had bad experiences with...
  18. General Discussion
    I have '12 1lt RS with rear drum brakes, I've been thinking about converting them to disc. Has anybody done it or know anybody that has? If so, how easy is it do accomplish and how much did it cost? Thanks Sent from AutoGuide.com Free App
  19. Gen1 1.4L Turbo
    Or is the disc/drum of the Cruze good enough, I would say the disc/drum is more than enough! You say Patman I need 4 wheel disc. What do I base this opinion on? Do you ever drive down the road and pay attention to what is in front of your car but not immediately in front of your car? Well...
  20. General Discussion
    I know this has been brought up before as a thread starter, but I called the dealership to verify whether or not this upgrade would void the factory warranty but someone hasn't called me back yet from there. I left the service advisor my name and phone number and reason why I was calling...so...
1-20 of 30 Results
Top