Chevrolet Cruze Forums banner
disconnecting

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Gen1 Audio & Electronics
    Hi all! First post here is unfortunately asking for help! Have a 2013 1.4 LT and the bluetooth keeps disconnecting when I switch songs and going back to FM and I have to wait 10-15 seconds until the bluetooth reconnects itself. Anyone else having the issue or know a fix? Thanks!!!
  2. General Discussion
    I would like to disconnect the hood release sensor so that the auto stop feature will be disabled on my 2016 Cruze. I have had the new car one week. The fan slows down and the air conditioning is not as cool when the car shuts down. I live in a large city in Texas in a area that has a lot of...
  3. Gen1 Audio & Electronics
    Hello! I need assistance figuring out what wire I need to cut in order to prevent my stock radio from responding to the steering wheel buttons. I have installed my own amps and have put a Nexus 7 in the dash that works with the steering wheel controls via the RCJOYCON EXR module. In the...
  4. Gen1 Service Issues
    im curious if disconnecting the battery will reset my trip a and trip b numbers. im keeping a total log of mpg for the total miles on the car. thanks Sent from AutoGuide.com Free App
  5. Gen1 Audio & Electronics
    I would like to know what reprogramming steps are required after the battery on the 2012 Cruze has been disconnected and then reconnected. The 2012 owner's manual talks about needing to reprogram the power windows. Are there other areas of the vehicle that also need to be reprogrammed? I have...
  6. Gen1 Appearance, Body, Detailing, & Interior
    Is there a writeup on this? I know its controlled through the e-brake. Anyone disabled this? Mark
  7. Gen1 Audio & Electronics
    When disconnecting the battery for ANY REASON on this car: ALWAYS disconnect the negative battery terminal first before the positive terminal on the Cruze!!! A regular 1/4" drive ratchet or 10mm wrench is in fact long enough to bridge between the positive terminal and the driver's side strut...
1-7 of 7 Results
Top