Chevrolet Cruze Forums banner
ebrake
1-6 of 6 Results
  1. Gen1 Brakes/Suspension Tutorials
    Tools needed: 7 mm socket Driver/ratchet with extension for socket Phillips head screwdriver Plastic trim pry tools (or tape coated screwdrivers) Pliers 19mm or 3/4 in. impact socket and regular socket (for the wheel covers if ya got em) 1/2 in. wrench or impact wrench 1/2 in. torque wrench 10mm...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi Guys, A few weeks ago I noticed my e-brake was not releasing on my drivers side. If you yank on the cable, it seems to come loose. Took the drum apart, everything moves smoothly back there. Looks like the cable itself is shot and should be replaced (it's 2-3x the proper diameter in the one...
  3. Gen1 Service Issues
    I am not sure if this is new since this is the first time ive used the ebrake but I have to ask. My front left tire went flat yesterday so I took the tire off and put the spare on along with the ebrake. Afterwards I took the tire with another vehicle to get plugged. Came home and replaced the...
  4. Fuel Economy
    Hi ALL I have a chevrolet cruze with rear disk brake with Ebrake have just change the rear brake pad but now the right Ebrake is loose and dont holdI have only the left one that work I removed the center console but there is no nut to tighten the brake can you help me ?
  5. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi all I have a chevrolet cruze with rear disk brake with Ebrake have just change the rear brake pad but now the right Ebrake is loose and dont holdI have only the left one that work I removed the center console but there is no nut to tighten the brake can you help me ?
  6. Gen1 Service Issues
    Just got my new 2013 Cruze Eco this week and found myself parked on a little hill. The E-brake (parking brake, whatever you call it), doesn't work that well. Maybe just needs adjustment?? Had to really crank it up. What do you think? Also, it's been a long time since I had a manual (love it...
1-6 of 6 Results
Top