Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 40 Results
  1. Gen1 Audio, Electronics & Electrical
    Saw video of a guy do this but a Lexus removes a ECU chip & flashes with ponyprog. What chip has the keys data for 2014 Cruze? Here's a ECU:
  2. Gen1 Audio, Electronics & Electrical
    Hi, I am having a problem with my 2014 Chevrolet Cruze 1.8 LPG. Sometimes the car starts stuttering a little bit, and different lights on the dash turn on at the same time: Stabilitrak, ABS, handbrake, parking sensors (??). The screen also says "CODE 89" plus sometimes "CODE 139" if i recall...
  3. Gen1 Service Issues
    Hey all I have a weird problem with my '14 Cruze with the 1.4L turbo gas engine. The car won't shift out of first gear and won't go past 60 even going down hill. The traction control, stabilitrack and cruise will not function either and the only code I am getting is U0101 no coms with the TCM...
  4. Gen1 Powertrain
    Would anyone know where i could find a ecu pinout for a gen1 cruze 1.4T, i have looked everywhere
    ecu
  5. General Discussion
    Hey guys! I have a 2012 Chevy Cruze 1.4T and recently my ecu had been fried due to not having the key in the on position while tuning. I bought a new programmed ecu and plugged it in and my car started perfectly. Only problem now is the engine light is flashing. I scanned it and received 3 codes...
  6. Gen1 Powertrain
    2013 LT 1.4T auto Okay so I can turn a wrench but when it comes to wiring/electrical systems I’m a bit of a caveman so bare with me.. and to make this clear this is not my car, it’s my girlfriends. early today she calls me panicked saying her cars freaking out and broken, she tells me the...
  7. Gen1 1.4L Turbo
    I replaced my ecu after hp tuners crapped out during a flash. I had a spare e78 with the same os and part number. I reflashed it with sps and now I can see the ecm again but the service theft deterrent system message is on. I have been researching for the last couple of days.... Nothing but...
  8. Gen 1 Tuning/Engine Modifications
    I recently had a chance to play around with a legit one and a few cars. It's ugly as hell but a cool device, but I want your guys opinion. Who has used it? Who thinks it's dumb for us? Success stories? Fails? Spit them out here.
  9. Gen1 Service Issues
    gday fellow cruze owners..my name is joey victoria..im here in australia..my 2010 1.8 auto ecu decided to die.wit code p0605 that wont go away triederasing it many times but seems no luck..my option are to take it to the dealership which will cost me an arm and a leg.or get a used one from...
  10. Gen1 Audio, Electronics & Electrical
    Hi! So, let me start out with this: I am a full-stack developer and a life-long computer guy. I am a Linux user, server architect, etc etc etc. I have spent my whole life working with computers. That being said, I am having a hard time finding any info on programming ECUs (without buying...
  11. Bcm

    Gen1 Audio, Electronics & Electrical
    I HAVE A CHEVY CRUZE 2011 LS MODEL WITHOUT CRUISE CONTROL SO I GOT A BCM FROM ANOTHER CAR SAME MODEL that have a crusie control & WAS THINKING OF INSTALLING IT ON MY CAR BUT I HEARD THAT I NEED TO REPROGRAM THE NEW BCM WITH MY ECM AND ITS DIFFICULT AND NO ONE IS DOING IT ANYMORE SO IS IT...
  12. Gen1 1.4L Turbo
    I am building and off road buggy and I will be using he 1.4 turbo. What I need to find out is where can I get someone to setup the stock ecu for it. I won't be using anything that was stock bcm, brake control or anything else that would hinder it. I have tried calling trifecta, hptuners, alpha...
  13. Gen 1 Tuning/Engine Modifications
    Pretty much have been stuck at 220 whp with the stock ECU. None of the known tuners out there seam to be confident running a big turbo on a tune over 22 Psi (stock MAP sensor max) I have a 3.3 bar sensor that will bolt in but the resolution goes to low and the fueling starts to stray pretty...
  14. Gen1 Service Issues
    Just can't seem to find this on the forum :( Any "recommended" software for reading ecu codes on my 1.6L? Being based in South Africa, I'd have to import. My vehicle just came out of warranty, so won't really be seeing the dealership alas General Motors left our shores end of last year! My...
  15. Gen1 1.8L
    First Post on this forum, need to get some information from fellow users, I have a 2012 1.8 Cruze and I am located in Trinidad. My ECU was damaged, Part number# 5WY1J16A, unfortunately this ECU is not part of the Cruzes built for the American Market. the US version is Part number 12653536. i...
  16. Gen1 Audio, Electronics & Electrical
    Hi, my wifes car is a 2009 Cruze 1.8 CDX, the Korean made one, anyway, water got through the seal on the rear ECU Plug, and water got into the ECU and fried it, it looks like just a few fried Caps, but instead of repairing it as there is a few other corroded looking bits, I am looking at...
  17. General Discussion
    I've seen serve rap different results googling this but I got a letter satin I had an ecu recall, this like like the 4th one, but besides the fact I just got my bcm fixed cause I thought I crashed it? Could I get reimbursed the cost of repair if it turns out it was a recall to begin with? 2011...
  18. General Discussion
    I just picked my Cruze up from the garage and the mechanic told me that the LED's in my headlights (that I put in after the ecu burnt and kept working even with a bad circuit) and my LED twilight/reverse lights, that were sending codes off in my comouter (obviously) could, and will eventually...
  19. Gen1 Powertrain
    Hi all. I'm not positive if this is the right place to post this, but it seems to be the closest topic I could find. Wondering if I could get some feedback from other owners who use the Torque ODBII app. I've used a bluetooth scanner and the Torque app on my 2011 1.4L many times since owning...
1-19 of 40 Results
Top