Chevrolet Cruze Forums banner

emblems

  1. Gen1 Appearance, Body, Detailing, & Interior
    Hey guys, I am looking to "re-style" my trunk lid with aftermarket emblems. I had found a site with some nice ones that I was going to order when I got the extra money but have misplaced what site it was. Does anyone have any suggestions on where to get some good trunk lid emblems?
  2. Gen1 Appearance, Body, Detailing, & Interior
    So, I have been looking to get replacement emblems for my 2015 Cruze. I've been searching online and can't seem to find a place that sells physical emblems. Am I out of luck? Do I just need to spray them, or dip them? Also, looking to replace some of the chrome pieces along the windows and on...
  3. Gen1 Appearance, Body, Detailing, & Interior
    My 2014 cruze's rear chevy emblem has water damage at the bottom of it & I find it absolutely hideous. So I'm looking for black emblems for it but having a little trouble... If anybody could post link's to where you bought yours that would be also. PS - I want entire new emblems, not just a...
  4. Gen1 Appearance, Body, Detailing, & Interior
    I am trying to plastidip the emblems on my car (cause I'm a sucker for making things look faster than they are) I am having trouble getting the bowtie on the back right, everytime I plastidip it (3-4 coats) and go to peel, the dip exposes parts of the chrome part. the yellow inner part of the...
  5. CruzeTalk New Member Introductions
    Hey guys im new to the forum and just wanted to show you my plastidipped emblems i did the other day. looks pretty sweeti also did the sidemarkers in black which looks so much better.
  6. Gen1 Appearance/Body Tutorials
    This weekend, I went against my own intuition and took a spray can to my 2 week old Chevy. I wanted to turn the gold on the emblems black as well as remove the "Cruze"and "LT" lettering. I think it turned out great! First, I first took off the lettering and here's how: First, I simply...
  7. Gen1 Appearance, Body, Detailing, & Interior
    Just wondering if anyone knows where i can buy some black chevy emblems for my 2014 cruze. I was going to have them painted but my brother in law said it wasn't a good idea to paint them becuase they are textured. Thoughts and suggestions?
  8. Cruze Parts
    Is there a good website for aftermarket emblems, badges, stickers, etc. for the 2011 Cruze? Stuff like the RS badges/stickers on the doors? Thanks!
  9. Gen1 Diesel General Discussion
    Like most on here I think the diesel Cruze needs more attention called to the fact that it has a special power source. I have seen the Holden diesel Cruze emblems mentioned here but I just can't bring myself to spend that much money on them with shipping. I did some searching on ebay and found...
  10. General Discussion
    I tried looking for a thread on here but couldn't find what I was looking for...but does anyone know how to debadge the emblems off the car safely without harming the paint and so fourth? I would like to take mine off to wax and detail around that area where they are. Ive never done this...
  11. Cruze Owner Projects
    Badges we dont need not stinking Badges we have horses..... 138 of them. I had to repair the hood that was damaged from an aligator ( truck tire tread) so while I was doing paint work anyway, I thought it would look cool to get rid of the bow tie and the cruze lettering on the trunk lid...
  12. Gen1 Appearance, Body, Detailing, & Interior
    Required materials: Goo Gone Drill with drill bits Razor blade Windex Paper towels Beer And of course the bowties: DefenderWorx 900638 Black Bowtie for Chevrolet Cruze : Amazon.com : Automotive I started on the back one: Grab the largest drill bit you have and drill a hole SLOWLY into...
  13. General Discussion
    I bought a used 2012 cruze 1LT/RS with 12000 miles on it. I debanged it and noticed that the RS emblems were just plane chrome. All other RS cruzes that I've seen have the RS emblem with an overlay of red. What gives? Whats the difference between the red overlay and my plan silver emblem. School me?
  14. General Discussion
    I've seen a lot of people use vinyl stickers to black out their bow ties. I have also seen that GM sell actual emblem inserts (chrome or black) to replace the gold ones. The stickers are ~ $12-$15. The pieces from GM are ~ $80. I am a little concerned using the vinyl sticker being that it's a...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Hello to all! I have a question, for those who put RS badges/emblems or even lip spoilers that don't require drilling, you obviously needed to wash and maybe even wax the car, or at least that part where the item is to be put, but did you have to use any special substances on the surface in...
  16. Gen1 Appearance, Body, Detailing, & Interior
    how do i remove the emblems in the back on the cruze, letters and all
  17. Gen1 Appearance, Body, Detailing, & Interior
    Just got in the mail two turbo emblems I orderd. Where are good places to put them?
  18. Gen1 Appearance, Body, Detailing, & Interior
    Hey guys, Slowly working on blacking things out. Side markers from grafxwerks should be here Wednesday at the latest (awhh yeah) I didn't really like the look of the entire hubcaps blacked out, so I just popped the Chev emblems out and painted them black with the touch up paint. I know that a...
  19. Gen1 Appearance, Body, Detailing, & Interior
    OK so i tried another mod today, and am looking for opinions. I work at a printing company and got ahold of some self adhesive vinyl (Glossy white) we use to print signs for cars. Wheels started turning and I thought of headlight eyebrows Ive been wanting. So I attempted to make my own. Oh yea...
  20. Gen1 Service Issues
    I swear this is the last of my bad news to date. Another issue i can shed light on is one involving the air vents. About 4 months ago i was driving with the fans on level 3. I switched the vents from defrost to face+feet. It was at this time i heard a loud POP! Startled i pulled over to check...
Top