Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Gen1 Powertrain
    Hello, Just wondering if anyone experienced something like this before. I live in one of the coldest cities in Canada and it’s currently -27C (feels like -39) When I was driving our car, the engine heats up normally when the heater isn’t on (I heard it heats up faster if I don’t turn on heater...
  2. Gen1 1.8L
    Went to start the car and engine failed and all the oil spilled out. Took it to the shop and this bolt is broken? Any idea as to why this happened? I just got lots of work done on the car for engine heating and cooling issues. Shop told me to bring it back in a week just to be sure it’s alright...
  3. Gen1 1.4L Turbo
    Hello I have a 1.4 L Turbo Charged engine my oil return feed is completely melted in half , the black piece is completely melted into my actual engine block A big piece broke off leaving the rest completely melted in there I've tried heat gun and pressure but not much to grab on to now , 3 in 1...
  4. Gen1 Powertrain
    Recently replaced my boost sensor on my Chevy Cruze 2014 LT turbocharged. Once the sensor was taken out, “moisture” was on the sensor itself. I could suspect it was maybe oil. The boost sensor code went away but upon leaving the driveway, the car does a little jerk when accelerating. Small jerk...
  5. Gen1 1.4L Turbo
    Hi. My car is a 2012, eco trim level with 1.4L gasoline engine. Please help me to identify item 1 item 2 item 3 item 4 item 1, 2 , 3 goes into item 4. Thanks.
  6. General Discussion
    Hello, I've surfed the web for a while now and have always landed right here on Cruze Talk. So today I decided to create my account and join the Cruze Talk Community. A little about myself and the godly fast Cruze(LOL JK). My name is Jordon. I'm 19 years young. I run a YouTube channel...
  7. Gen1 Powertrain
    I bought a second-hand Cruze and blew the engine in it after 2 weeks 🤦‍♂️ The engine in it had an engine code of 2H0 (made in Korea) my question is should I be able to swap it out to an LUW engine with the same specs? Both engines are 1.8L, 4 CYL. I have already bought the LUW engine and had a...
  8. Gen1 Service Issues
    So I just installed the ZZP V3 Turbo on my 2016 Chevy cruze 1.4l and 42# Fuel injectors and every since I put those two mods on the engine has been over heating after about a 1 mile to 3 miles on the road. I’ve only replaced the thermostat because I thought that might’ve went out but I got that...
  9. Gen1 1.4L Turbo
    Hey guys, I am rather new still, and lately (more like several months) been dealing with a noise issue with my 2015 1.4 LT. So basically, there is a buzzing noise that occurs when I step on the gas, doesn't matter how hard I do it, HOWEVER, it doesn't always happen and seems to happen whenever...
  10. Gen1 Powertrain
    Hello ... I have a 2013 Cruze with 1.8L engine, 175k miles. I noticed recently that the temp gauge was not getting to operating temp, so I checked the coolant level and found this. I initially thought this was oil, but I'm not sure. It is more BLACK than it is BROWN. I wiped the funnel on a...
  11. Gen1 Powertrain
    Hi. I need you to help me to identify different components in my car's engine bay. I am driving a 2012 eco, 1.4L turbo, manual. As the attached, I know that 1 is the air intake and air temperature sensor (?). I know 2 is the heat shield of the turbo. Let move to the question mark, are those...
  12. Gen2 Powertrain
    I have a 2nd Gen 2016 Cruze Manual. The transmission has been removed and put back to change the clutch master cylinder under warranty. They have also changed the transmission oil. Times to times, I now have some bumps when I clutch the first gear to move forward from 0 to few km/h. I feel...
  13. General Discussion
    So I just bought my used 2018 Chevy Cruze 4 days ago from a local Autonation dealer in Miami, it’s 81,000 miles and serviced right before I drove it off the lot. Last night while I was parked with the car on a “Service StabiliTrak” message came up, I turned the car off for a few minutes and when...
  14. Gen1 1.4L Turbo
    Hi. Recently I found out that the engine shakes excessively. At first I thought the spark plugs, I changed all 4, not resolving the problem. I then thought of the engine (transmission) mounts, 4 of them, I changed 3 out of 4, only the rear transmission mount was left, not changed. All three...
  15. Gen1 1.8L
    I need an engine for my 2014 Chevy Cruze LS. I found one that I want to purchase but need help making sure it's compatible. It's from a 2016 Cruze and the ad says This will fit: Chevrolet Cruze 2016-2016 VIN P (4th digit, Limited), 1.8L, VIN H (8th digit, opt LUW), MT Chevrolet Sonic 2016-2018...
  16. General Discussion
    How do i know if I have an lem 2 or lex p engine in my 2017 chevy cruze lt manual
  17. General Discussion
    I only stumbled across this forum, and have literally NO idea how to work with cars, so bear with me. I have a 2016 Chevy Cruze Limited, and today I could not get my car to heat up. I have the heater cranked up, but it only blows cold air. I’ve had this issue a few times, but it usually ended...
  18. Gen1 1.4L Turbo
    Hi. My 2012 eco manual, with 60K mile, developed a little shaking. Today, I asked an mechanic, with $40 inspection fee, he told me that all four engine mounts are bad. He also quoted me a price of $1,150 to fix that. I do not have that amount of money. I decide to do it myself. The first...
  19. 👋 CruzeTalk New Member Introductions
    Hi everyone, this is my first time here hoping maybe someone can help me out with this issue. https://www.cruzetalk.com/threads/2013-chevy-cruze-lt-stalling-issue.252389/unread
  20. Gen1 1.4L Turbo
    Hi everyone, this is my first time here hoping maybe someone can help me out with this issue. I have a 2013 chevy cruze 1.4lt with 240,000km. recently its been stalling randomly when going slow but almost everytime it happens shortly after ive started the car, so lets say im at a parking lot...
1-20 of 500 Results
Top