Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 100 Results
  1. Gen1 Service Issues
    Good Afternoon everyone. I have a 2012 Chevy Cruze 1.8L non turbo. A few days ago, my check engine light came on and I finally got the scan tool on it. It threw a P0300 (random misfire), P0171 (system too lean), and a P0171 (evaporative emission system high purge flow) codes. A few people I had...
  2. General Discussion
    Hi folks, This is my first post here so be kind! I'm currently experiencing quite an annoying error with my cruze. Each time I start the car, the driver info screen shows "Error 82", and the check engine light comes on. I have navigated through the menu to reset the oil life (it was changed...
  3. Gen1 Service Issues
    On Mach 5, 2019, error code "P0597" popped up on my 2011 Chevy Cruze LTZ. Code went away after that. My garage (I'm out of warranty here, btw, because my car has just over 152,500 miles on it after being bought in late 2010) looked at my thermostat but could detect nothing wrong nor error code...
  4. General Discussion
    I have a new 2018 Cruze. The auto stop function worked OK for 1 month. Two days ago while stopping at a red light my car got a slight hit at the back by another car. Since then the auto atop stopped working. Could this hit be the reason? Shouldn't there be some error code displayed telling the...
  5. Gen1 Service Issues
    Hi i have automatic chevy cruze 2011 ls The problem is there are no error codes appear on the speedometer screen How can i know the codes on the car when happen ?
  6. Gen2 Powertrain
    So I’m trying to scan my stock tunes on my autocal. Was going to do this before purchasing my tune. I’m getting an error message saying “Run Boost Loader, Error 0552” when I try to scan under Read 1 E80. Anyone else have this issue? Everything on the autocal was updated as well. I read 2 T76 and...
  7. Gen1 1.4L Turbo
    Vehicle currently has 97k miles on it. Just had the CEL turn on last night driving home from a friend's house. Took the car to AutoZone today and had them do a scan. The health report showed the following codes. P0171 System Too Lean (Bank 1) P1101 Intake Air Flow System Performance P0171...
  8. Gen1 Service Issues
    Hey guys, Was hoping I could get some insight on this before investigating any further. I'm in PA where the weather is obviously very bipolar. Back in February I was driving up a relatively steep hill at about 15 mph and it sounded like the engine was hesitating to run. The engine light blinked...
  9. Gen1 Powertrain
    Hi Guys, The Cruze 2013 got Error Code 89 after Automatic Transmission System repaired. I also replaced the Thermostat housing, but the error did not resolve. The repairer tore off a number of wire cars and did not tell me anything. So I guess that the Thermostat sensor's cord has been cut...
  10. Gen1 1.8L
    Hey Guys, Maybe someone can help me out here. Been having some issues with my one 2012 Chevrolet Cruze. It is not the turbo model. it is the 1.8L. Now, the other day the check engine light came one. Scanned the car with an OBD2 scan tool, and was getting the P0315 error code. Went ahead and...
  11. Gen1 Diesel General Discussion
    Hello everybody, reading this great forum has helped me to solve many questions regarding my Cruze and I am sure, you will be able to help me out on this one also. My Chevy Cruze is 2012, Korean made, for Europe, 2.0, 163 hp, 155.000 km, manual transmission. The issues I have are: When...
  12. Gen1 1.4L Turbo
    Hi all. Hoping someone can help me. So my battery died 2 days ago after 5 years. So it’s about time I replaced it but now I’m having weird issues. I was driving at a low speed on the street when I felt like I accidentally knocked my car into neutral cause I kind of lost my ability to accelerate...
  13. Gen1 1.4L Turbo
    Ever since I have swapped my engine, I get a p2261 error. It is the same bypass valve on the same turbo assembly as the old engine. I have checked the electrical and vacuum connections multiple times. The weird thing is that it seems to work OK. The boost seems well controlled. I can feel the...
  14. Gen1 Service Issues
    HI Folks, i have a 2012 Cruze Eco, 6 MT, 1.4l turbo with 93,398 miles on it. Bought it last December with 86,500 miles on it. Carfax showed it had been serviced regularly. i didn't think to print the carfax before i completed the sale so don't have the detail now. So here are the problems...
  15. Gen 2 Tuning/Engine Modifications
    *update* Trifecta got back to me first thing this morning, they’re customer service is A+, and it was super simple. Something got screwed up with the file when they uploaded it, so they re-uploaded a clean copy of my tune and advised me to delete everything on my laptop and redownload the tune...
  16. General Discussion
    I have the following error code. I also have decreased power accelerating. Any idea what may be wrong? Have an appointment with the dealer scheduled for Wednesday.
  17. Gen1 Service Issues
    2015 Diesel Cruze, Automatic, 42k miles. I purchased this car Sept 2017 with 32k miles. Since then I've had to have the grill shutter fixed at the stealership ($500) because of a GM warranty block I wasn't made aware of before buying the car. Now it only has 42k miles on it and the SES light...
  18. 👋 CruzeTalk New Member Introductions
    So I pulled off my intake manifold to check and see if my red check valve had failed and to my surprise it was intact. So I cleaned the manifold and out everything back together, I drive it for like 15 minutes and a get a check engine light with the p0033 code. To no avail I can not pin point...
  19. Gen1 1.4L Turbo
    Hey y'all, I'm new to these forums and 2012 Chevy Cruze LT Turbo that I am trying to fix. The error codes are P0299- Turbo Underboost, P2227 Barometric Pressure Circuit Rage/Performance, and P00B7- Engine Coolant Flow Low/Performance. I'm currently trying to fix my girlfriend's old car so her...
1-19 of 100 Results
Top