Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 398 Results
  1. Gen I
    This a stock midpipe from a 2012 to 2015 Chevy Cruze LT. Turbo. It should work on any cruise from 2012 to 2015. I replaced the exhaust on my car and is the OEM part left over. It only has about 42,000 mi on it so it should be good for many miles after that. From what I understand. Again, pretty...
    $175 USD
  2. Gen I
    Looking to buy a downpipe for my 1.4L Turbo cruze and I haven't been able to get the exhaust package off ZZP due to them being out of stock and I have been looking for a decent amount of time. If you have a SOLID DOWNPIPE for a 1st gen Cruze please message me. I AM NOT WANTING THE DOWNPIPE WITH...
  3. Gen1 1.4L Turbo
    What's up everyone! My latest upgrade to my 1.4L turbo 6MT Chevy Cruze is finished. I took my mufflers off immediately when I purchased the car, but recently I wanted MORE LOUD. I had my local exhaust shop make something custom for me. I now have no Resonator or Muffler, and he welded a 3" tip...
  4. Gen 2 Tuning/Engine Modifications
    I'm looking for advice on doing a custom exhaust or searching for someone to sell me a second hand set up. When it comes to customs I want to keep both cats unless I can get a second hand bnr catless downpipe but I'd like to change our the resonator to get some deeper tones without sounding...
  5. Gen1 1.4L Turbo
    I am planning on modifying my exhaust; my plan is to buy the zzp catless downpipe and bolt in an exhaust cutout on the stock midpipe. If the primary catalytic converter is removed will the secondary catalytic converter be able to handle the extra chemicals or will it clog soon? If clogging turns...
  6. Gen1 Service Issues
    So my last car, a 2012 Ford Fiesta had its transmission completely die so I just purchased a 2011 Chevy Cruze 1.4 with 77k miles on it. Always been a fan of Chevy and these cars but I have run into two issues with the car since getting it a week ago. The first problem that is bothering me is I...
  7. Gen2 Powertrain
    I don't know if Holley waits until they have some orders banked up before they fabricate these exhausts, but the Flowmaster 817762 arrived today after ordering it back on Sept. 10. I'm not expecting any real performance increase, just wanting something better than the stock sound on my '18 RS...
  8. Gen2 Powertrain
    Hey all, so apparently I need a new exhaust.. not sure the extent of it yet since I’m gonna have to take it to a muffler shop. But I was looking around for exhaust recommendations. Not sure if I’ll need a full exhaust with cat or just a cat back(I may not know what I’m talking about here). My...
  9. General Discussion
    Hello, I’m curious about the resonators on the first gen cruzes I’ve seen them with a short rez and a long rez, just want to know if they changed it throughout the years or if the came on different models. Thanks
  10. Gen1 Service Issues
    Hello everyone! First time poster and new to the website. I have a 2014 Cruze 1.4L RS LTZ with approx 92,xxx miles. My issue started a little over a month ago and the car has been in and out of 2 different service shops (including my dealer) since. One time driving I smelled something odd, so...
  11. Gen1 1.4L Turbo
    Hi, I’ve got a P0420 code and the dealer said that it was my front catalytic converter. I have a little over 80,000 miles on my 14 Cruze and I need help figuring out what caused the catalytic converter to go bad. I changed the spark plugs at 74k just for a tune up and the classic ignition coil...
  12. Gen2 Appearance, Body, Detailing, & Interior
    I ordered a Borla exhaust that’s stainless steel assuming the OEM exhaust piping is stainless steel? I’m hoping it’s not aluminum or anything like that because then welding will be a hot mess. Thanks!
  13. Cruze Owner Projects
    So recently purchased tru bendz tubing for my 15 lt and was wondering if anyone else has some experience with finding an intermediate / mid pipe AFTER the resonator. Already have other exhaust parts to complete the system just need an exhaust tubing that has the same 2 bolt flange like the resonator
  14. Gen2 Powertrain
    Hello, so I have a 2018 RS Red-line sedan and I've been looking for exhausts and I'm having so much trouble finding exhausts that fit the RS sedan. I can find a ton for first gen Cruze's, a handful for 2nd gen Cruze's that aren't the RS package, and a few for the hatchback but I cant seem to...
  15. Cruze Owner Projects
    Hey everyone. I’ve got a 1.4t cruze with a ZZP catless downpipe, and muffler delete. I’m interested in getting a 2.5” downpipe back exhaust, but worried how it will run. Will it run correctly without a tune? Thanks.
  16. General Discussion
    ENJOY! 1. The much anticipated package arrived. 2. The Contents 3. Spare Parts? 4. There it is! 5. The Y-Pipe 6. All Out 7. The Shortside Tip 8. The Longside 9. The Muffler 10. The Hardware Pack 11. Who Reads the Instructions! 12. What Could Possibly Go Wrong?
  17. Gen1 Powertrain
    The Magnaflow 15495 | Chevrolet Cruze | 1.4L, 1.8L | Dual Cat-Back Performance Exhaust System' on Hottexhaust is on sale for $647.36 and includes shipping. You just need to enter your email address to get the coupon code. The best I have seen this for until now was $809 and some change. This...
  18. Gen2 Powertrain
    So I ordered a Magnaflow dual exit catback (19271) for my 2016 Cruze Premier RS. I went with the 19271 cause its suppose to be for Cruze's with the RS package and the 19480 says it excludes the RS package on most websites. Hottexhaust decide to just send me the 19480 anyway but lucky it went on...
  19. CruzeTalk New Member Introductions
    Does anyone know if there is an aftermarket exhaust manifold that would remove the catalytic converter in the stock manifold? I have looked at a few previous posts and have not had much luck locating one. The first thread I looked at was by the BNR folks saying they came out with one. I...
1-19 of 398 Results
Top