Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 22 Results
  1. General Discussion
    I was pulling out of my apartment's covered overhang and wasn't paying attention and managed to dent the passenger fender pretty well. Thankfully it's just the fender and the replacement panel isn't all too expensive and the replacement steps won't be horrendous. The problem is painted panels...
  2. Gen1 Appearance, Body, Detailing, & Interior
    Easy project, but you do have to drill a hole in your fenders. Works with the turns only, I also modified the rear trunk mounted lights to also function as brake lights also. Never satisfied with the ordinary I guess. Always seem to modify or change-up stuff, from hotrods to choppers.
  3. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone attempted to replace the front right fender and lower bumper? I had some one hit me in a car park and do a runner. Bumper has cracks and a hole so well need to be replaced and the fender is warped. I don't mind getting the parts and doing it myself, just looking for people who...
  4. General Discussion
    so I'm in the process of removing my left Fender. Most of it is pretty straight forward... except for the piece of trim between the A-Pillar(exterior) and the fender itself. There appears to be 2 or 3 plastic clips because this piece was spared from damage I'd pike to know how in the **** to...
  5. Gen1 Audio, Electronics & Electrical
    Hi guys and girls just installed my smoke coloured LED Fender Indicator Markers i hope you all like :):):):):) LED FITTED LED ON THE ORIGINAL ONE
  6. Gen1 Appearance, Body, Detailing, & Interior
    Tried to search, but I don't know the correct terms, here are some pictures! Basically, the roads in the springs love to have massive dips because the roads are shitty, and I ended up damaging it to the point where it wont stay anymore. From what I understand, it's supposed to hit/break instead...
  7. Cruze Parts
    I'm looking for a silver front passenger fender for my 2014 eco Cruze. Please email me at [email protected] if you know where I can get one. I'm in Lexington, SC 29072. Thanks!
  8. Cruze Parts
    got a nice xmas surprise, some dick tweaked the drivers side fender while car was parked, looking for fender in black granite metallic
  9. Gen1 Appearance, Body, Detailing, & Interior
    I'm not sure what they're called, I'll call them fender cover things... Kinda like fender flares, but without the flare. Anyway, do they make them for the Cruze?
  10. General Discussion
    Happy Canada Day for those of you in Canada, and Happy Independence Day to my US friends. Thought I would dress the Cruze up with a custom made-to-fit flag pole for the right fender. Took me around an hour to cut and shape the metal to fit just perfectly in the little gap. Painted it black and...
  11. General Discussion
    Well today I installed my carbon fiber vinyl stripes on fender, and I redid my bowties. I had enough to do both fenders but I messed up so I only had enough to do one fender. I got more on order so hopefully I get more vinyl in soon. I get the vinyl from a guy in Maryland that has his own...
  12. General Discussion
    I damaged my fender on my 12 1LT and need to replace the right front fender. Is there a guide showing where all of the fasteners are? I've never replaced a body panel before, so this is outside of my experience base. Sent from Free App
  13. General Discussion
    I took my all of my fender liners out this weekend to wash them good and noticed that they didnt have the liner insulation on them like my lt cruze did. Anyone have any clue why this is? Sent from Free App
  14. Gen1 Appearance, Body, Detailing, & Interior
    So I had a recent problem with my fender a branch decided to land on my fender and now its badly damaged, think it would just be better replacing it myself than taking it to a body shop and spending 2k to fix it? Any of you ever try replacing the fender on a cruze if so is it a complicated...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Long story short my father in law back into my right fender causing some minor damage. It's dented and is scratched up a bit. Took it to a body shop and the estimate was $1300! Now I didn't want to go through my insurance because in all honesty in looked like it would only be around $500 in...
  16. Gen1 Appearance, Body, Detailing, & Interior
    So my luck with this car is BAD, I have NEVER had so much poor luck in my life with this thing. I'm in the middle of a buy back and someone decided to let their shopping car attack my car a few days ago. The Buy Back states the car needs to be in PERFECT condition, so I need to fix this thing...
  17. General Discussion
    A few days ago I got into a little fender bender accident. I haven't gotten a formal insurance estimate yet, but it looks as though I'll need a new bumper cover, lower grill and license plate frame. I priced these out with the dealer and the bumper cover is $355, unpainted, and $173 for the...
  18. Gen1 Powertrain
    Hi there. I just got a KN Typhoon short ram for my 1.8. It's great, the install was a breeze and boy does it purr above 4000 rpms! A couple of questions. Years ago I recall reading that fenderwell intakes, although offering the most bang, can run into major issues if you have puddles to go...
  19. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone seen some sort of chrome fender trim or flares out there for the Cruze? I put some on my '04 Impala, loved the look cus it made the car look aggressive with the little bit of pop out around the wheel wells. Just seeing if anyone has spotted anything out there.
  20. General Discussion
    Not sure if anyone knows how, or has attempted to, adjust the front fenders on the cruze previously but I was hoping to get some feedback on how this could be done. Recently when I waxed my car I noticed that the tops of both front fenders are sandwiched up against the a-pillars and dont seem to...
1-20 of 22 Results