Chevrolet Cruze Forums banner
fix
1-17 of 92 Results
  1. Gen1 Engine/Transmission Tutorials
    Here to fine tune my original DIY post on fixing the P2076 intake manifold tuning valve issues. Symptom: CEL is illuminated with code P2076 - intake manifold tuning valve position sensor or switch circuit range / performance Problem: The lever connecting the tuning motor to the intake manifold...
  2. Gen1 1.4L Turbo
    hey guys so i would like to install the pcv fix kit but i dont trust myself to install it, is there anyone in canada, in ontario maybe the GTA that has experience with this that can assist me?, ofcourse your time would be paid for
  3. Cruze Parts
    I have both XtremeRevolution's Big 3 kit and his V1 Manifold PCV valve fix kit as well as the BNR throttle Body Spacer for sale My cruze got totaled by a deer before I got an chance to install them. All are brand new and never been installed BRN Throttle Body - $55 Big 3 Kit - $45 V1 Manifold...
  4. General Discussion
    Just the running lights sometimes flicker, any way to fix this Has OEM headlights Thanks
  5. Gen1 1.4L Turbo
    So as the title states, I installed a cold air intake today (one of the longer ones, previously had a short ram) and now I was almost immediately met with a P1101 code. At the same time I also did installed a BNR (Forge) atmospheric bypass valve. There were no codes before the install...
  6. Gen1 Service Issues
    Been searching on here... change o2 sensors first, if they don't fix it then new catalytic converter (get GM brand vs aftermarket). Anyone have the part numbers for these items handy please?
  7. General Discussion
    I hava a 2014 1.4l and had the valve inside the intake manifold and the pcv on the valve cover go bad. I purchased GM replacement parts for them and installed them a couple days ago. Since the install when I try to start the car it revs up to redline and then dies. After a couple times trying to...
  8. Gen1 1.4L Turbo
    (For the short, but boring version, skip to 'quick overview' below, lol....) Oh my goodness... Well I hope there are a few of you who enjoy a good novel, since I chose to attack the problems with this car in succession (for the most part) as opposed to posting every individual issue. I've dug...
  9. Gen1 1.4L Turbo
    Hey, I've noticed occasional P0171 codes logged. I'm not getting a CEL as you need 2 or more 0171 logged to trigger it. Noted pursuing forums that people who wait till the intake manifold fail generally have other seals etc go bad as a result. with 70K on the OD, and no real issue to report...
  10. Gen1 Audio & Electronics
    I am almost ready to reinstall my cluster and cannot find the instrument cluster rattle fix. Something about putting some foam in a channel. Thanks
  11. Gen1 Service Issues
    I bought my 2015 Chevy Cruze LT1 in February, less than a year ago. For the last couple weeks, every once in a while when I’m driving my car it would sort of jerk a little bit, kind of like my car is jumping- that’s the only way I can explain it. It would do this mainly when I’m accelerating...
  12. CruzeTalk New Member Introductions
    I'm wanting to order the kit, but I cant find a link to order it. Could someone help me please
  13. Gen1 1.4L Turbo
    Hello, I check in here often, but haven't posted often as my 2011 Eco has been largely trouble free, until yesterday. (76K miles, Mobile 1 oil and Wix filters from day 1, top tier premium fuel in tank) Looking for others who may have experienced this, and see if new lifters are worth the...
  14. Gen1 Service Issues
    This is a longstanding issue with all Chevy Cruze cars for several years now! Chevy have not addressed this problem and we all are suffering because Chevrolet continue to produce vehicles with the same design flaw, and there is a solution not a Chevrolet one yet though! The intake...
  15. Gen1 Service Issues
    This is a longstanding issue with all Chevy Cruze cars for several years now! Chevy have not addressed this problem and we all are suffering because Chevrolet continue to produce vehicles with the same design flaw, and there is a solution not a Chevrolet one yet though! The intake...
  16. Gen1 1.4L Turbo
    Hey there, 2011 Chevy Cruze 1.4 Liter Turbo LT So long story short whilst replacing the valve cover gasket one of the bolts that are on the valve cover got cross threaded. The bottom two rows of the bolt broke off. Now it won't screw back in securely. (My fault obviously). It now leaks from the...
  17. Gen1 Engine/Transmission Tutorials
    How-To: GM 1.4L LUV/LUJ PCV Fix Kit V2 Install Overview: For details and ordering information on the PCV Fix kits, go to: Welcome to CruzeKits.com - Home of the PCV Fix Kit Note: This PCV fix kit has been replaced by the V2.1 PCV Fix kit, which uses a EVAP purge line "Y" fitting for a vacuum...
1-17 of 92 Results
Top