Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Gen1 Diesel Technical Discussion
    In a moment of stupidity I broke the small tongue clip for the mass air flow sensor. It's the internal piece that snaps over the pin on the MAF body, so it's inside the clip. I think the correct operation is to pull up on the red lock and press down on the clip so it lifts up. Well I just...
  2. General Discussion
    Quick question on getting the flow masters. do I need a new bumper for the exhaust to go through? Or is it just the bottom plastic part? Was looking at my cars rear end and noticed no visable exhaust. Thanks
  3. Gen1 1.4L Turbo
    Please note that this is a Chevy in the EU market, but I doubt there will me major differences with regard to what I'm dealing with. With the exception of a broken turbo, which got replaced under warranty, I had a relatively worry-free 3 years of ownership of my Cruze. I only clocked 32k miles...
  4. General Discussion
    Hey guys, I'm just wondering if anyone has a magnaflow exhaust with their resonator deleted. I'm getting mine done on the 16th, just wanna know if it's worth it or not. Thanks!
  5. Cruze Parts
    19" FAST FC04 flow formed Mat Bronze wheels with 245/35/19(+hardware) used 5000km Up for sale are my custom drilled 19" Fast FC04 in Mat Bronze. Mine were the first 19" drilled for the 5x105 Application as I went to FAST in person for them. I paid almost 1800$ for these with the Evergreen...
  6. Gen1 1.4L Turbo
    Post is for folks thinking about removing the spacer and the impact I am seeing on my vehicle. After removing the plastic spacer insert from the ZZP Cruze High Flow Intake, I have noted very lean fuel trims, LTFT as high as +25 and changed my WOT fuel significantly, danger zone 0.84-0.88...
  7. Gen1 1.4L Turbo
    This last week while I was in Grand Rapids, Michigan I stopped in at ZZPerformance to purchase an intake. After traveling more than 1,000 miles with it installed I wanted to share a product review. Fit: 9/10 Cost: 10/10 Quality: 10/10 Cool Induction Noises: 12/10 Pros: This intake is very...
  8. Gen1 Diesel Technical Discussion
    Where does the air flow to the cabin filter originate? I changed my filter recently and noticed a little rodent digging on the intake side of the filter. Wondering where it originates so I can place some screening over it to keep them buggers out.
  9. General Discussion
    Please delete post All fixed, don't worry
  10. Gen1 1.4L Turbo
    Does anyone on here have technical data on the stock turbocharger? Looking to see what max flow rate is? Thank You
  11. Gen1 1.4L Turbo
    so I bought this car with the MANN filter, which has some weird soft stuff that actually helps prevent pollen and dust from entering air chamber. I just installed the K and N drop in air filter. I immediately see better results in performance and even gas mileage 3 mpg increase. Is there harm in...
  12. Buy/Sell Classifieds
    Getting ready to sell my car so I put my stock exhaust back on. Selling my magnaflow cat back system, it's the one with the dual tips, been on the car for a couple of years. I was surprised to see the price really went up on this system. $350 obo prefer to deal locally, Chicago or Milwaukee area.
  13. Gen1 Powertrain
    ZZPerformance High Flow Intake for 1.4L Chevy Cruze | K&N Air Filter I cant find a post about this, anyone installed one yet? I want to know how well it works, if i can save $100 from a K&N I would like to. It does used a K&N filter supposedly so it really is just the main body part.
  14. Gen1 1.4L Turbo
    Anyone try or know if a dry filter will fit on the stock intake tubing?
  15. Gen1 Powertrain
    Let me start by saying I completely understand that an aftermarket intake will flow better than the OEM unit will, especially when fitted with a less restrictive filter. I get that. I was curious to see how well the stock intake flowed, but how to measure this? Well, it is quite common in...
  16. General Discussion
    I have a 1.8 LS with a straight piped exhaust. I want to make it sound better. I have been reading a lot of threads and it seems like everyone is saying to get a Flowmaster 80 Series and a Vibrant Performance Ultra Quiet Resonator. Can I do that with a single straight pipe exhaust? Should I add...
  17. Fuel Economy
    This week I took a road trip on Interstate 80 across Nevada. The temps climbed into the 80s during the day. I tried to not use the A/C or open a window for as long as possible, but eventually it got too hot in the car and I had to do something. In the Nevada desert there are many stretches of...
  18. General Discussion
    Like the title says I am looking for a high flow or performance cat. I bought a zzp race dp and a cat less mp. I got it used and for a real good price. My problem is. I don't want to run no cat on my car, so I figured I could just install a high flow cat on my midpipe before I install it. I am...
  19. Gen1 1.4L Turbo
    So in the sonic forum someone posted that the k&n filter part # was the same for the 1.4 and 1.8. So does this mean that the aem dry flow filter may fit our 1.4 airboxes? Or is our filters a different size than sonics?
  20. Gen1 Powertrain
    Ordered an AEM dry panel filter to replace my stock paper filter. As soon as I get it I'm going to do some logging and see what it impacts. I'm hoping I can raise my g/sec but I'm not too hopeful. Anyone else have an dry filter? I saw one person posted about it but they never got back to tell...
1-20 of 26 Results