Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Gen1 Diesel General Discussion
    I've recently started using another fuel station (Petro Canada) instead of the one I've been using practically since I got my Cruze brand new (Esso ((Also in Canada)). I still have a bit more testing to do, so to speak. My distance between regens, as monitored via my ScanGauge, have been cut in...
  2. CruzeTalk New Member Introductions
    does anyone know what is the keyfob frequency of cruze?
  3. Gen2 Wheels, Tires, Brakes, & Suspension
    I thought I was all set with my winter wheels from my 2012 Cruze and could just slap them on the new hatch, but it turns out I could not program the sensors with my relearn tool. I suspected it might be that the Gen 2 uses a different frequency. A stop at the dealer confirmed this. Gen 1...
  4. CruzeTalk New Member Introductions
    I notice that the oil life monitor in my 2011 Cruze started reducing the mileage between recommended oil changes. Up till recently, it used to show 50% oil life remaining after 9,000km but right after it hit 250k it started showing 50% at only 6,000km (I've always changed it at 50%). My driving...
  5. Gen1 Audio, Electronics & Electrical
    I have been slowly hooking up my system using XR's SQ thread as a template. Over the weekend I hooked up the Vifa tweeters and I get the high frequency whine. I searched the forums but most of them seem to be kinda open ended, but the most common suspect seems to be the PAC unit. I am...
  6. Gen1 Powertrain
    G'Dayall Well if you have been following the engine bay sound threads, some of you willknow I tracked that sound down to the Transmission Control Module. Knowing itslocation and giving my best technical guess at it being one of the transmissionsolenoids, it was off to GM in the USA to get the...
1-6 of 6 Results