Chevrolet Cruze Forums banner
gen1
1-20 of 37 Results
  1. General Discussion
    I have a 2014 Cruze LTZ RS with passive entry and push button start. I like the look and feel of the newer (2017+) fobs and since I don’t ever use the “switchblade” key, and recently lost a fob I was curious if the newer style 2017-up Chevy fob would work for my 2014 as long as it’s on the same...
  2. Gen1 Powertrain
    I need some help! My EGT # 2 is fluctuating back and forth from the normal range to between -86 degrees to 2976 degrees. It will hit the top and bottom temps for a microsecond as it is fluctuating. I have replaced both sensor #2 and #3. I have the following codes - P2084, P20E2, P242B...
  3. Gen1 Audio & Electronics
    I'm looking in purchasing some aftermarket headlights for my 2012 Cruze that feature a DRL strip in them. I was concerned on how these lights would operate as my Cruze is a 2012 model which featured the headlights running at a lower voltage as a DRL as opposed to the 2015+ that had a DRL...
  4. CruzeTalk New Member Introductions
    Hey guys! I bought my 2011 Chevy Cruze Eco 1 year ago today, and I am happy with the progress I've made in 1 year with a limited budget haha.
  5. CruzeTalk New Member Introductions
    Hi everyone. New member. I have a 2015 cruze . Thanks
  6. Gen1 Diesel General Discussion
    Hello, Been on these forums for a while now and they've helped be on many different things with my car. But this car has been through so much the last few years (under warranty) but just recently about 2 months ago there was a slight oil leak coming from what looked like the bell housing took it...
  7. Gen1 Powertrain
    So ever since I’ve owned my CTD I’ve noticed a slight rattle, metal, from the engine area. I’ve check the heat shields, exhaust, all tight. Today I was changing my oil and noticed the lower mounting tab for the oil filter drip catch tray was broken. I bet this is the cause. Was going to remove...
  8. Gen1 Powertrain
    So I'm looking through Rock Auto for a new Valve Cover and Gasket, since it looks like the PCV is shot, and they don't have the correct one (no PCV on top and it has a port for a vacuum tube). Other than the stealerships, where else can I get the correct cover and gasket? I've noticed that...
  9. Gen2 Wheels, Tires, Brakes, & Suspension
    I have a '13 Cruze and an '18 Cruze. My old Cruze has snow tires on it. Aside from the tire pressure sensors would there be any problems if I swapped the wheels and tires between the two?
  10. Gen1 Engine/Transmission Tutorials
    Tips and Tricks for Gen1 Cruze Turbo Replacement Overview: I didn't get enough pictures to make a complete tutorial for this one, but I'll try to walk you through the process, and focus instead on the difficult parts. I've had people tell me this was a pretty difficult job, but I didn't find...
  11. TRIFECTA Performance
    We'd mentioned to several people wondering about our 55mm turbo project that there had been some delays due to a compressor change. It turns out the change was to make the compressor even larger! This will delay the launch of our turbo just a bit longer, we need to calibrate with the larger...
  12. Titan Synthetics
    It took a while, but AMSOIL has finally released a 15k mile filter for the Gen1 Cruze. The filter part number is EA15K35. This is a synthetic media filter, rated 20 microns absolute at 98.7% efficiency, or a beta ratio of beta75 @ 20 microns. The filters are rated for 15,000 miles, so those of...
  13. Gen1 Diesel Technical Discussion
    I'm looking at doing my 100k mile service here before it snows. Do any of you who have ordered or researched the water pumps have confirmation on the proper part numbers? This is what I have, but I'm not confident about the numbers, since I just sort of gleaned them from part sites here and...
  14. Cruze Parts
    Fs kn intake tube with coupler and hose clamps. Does not come with filter or heat shield. Make offer + shipping. Tube has one small dent. Can send pics to cell phone.
  15. Gen1 Powertrain
    The Gen1 Cruze clutch has been reported as feeling numb. Furthermore, the car suffers from shift grinding, inconsistent shifting, and notchy/hard shifting, especially during spirited driving and rapid shifting. This thread will address these symptoms with solutions for addressing the root cause...
  16. Gen1 Appearance, Body, Detailing, & Interior
    Hi Guys I was thinking of upgrading my existing Gen1 Steering wheel to a newer version that also included the Bluetooth controls. My existing steering wheel has the Audio controls on the right and the cruise control options on the left, like this; What I would like to do is upgrade to this...
  17. Gen1 Service Issues
    I bought some new digital ac gauges and I"m looking to confirm the database on the early cruzes. It only goes to 2012 models but I'd imagine the 13 and 14 probably be the same system capacity. I"m waiting for the cd to update the database software. The question is this. If any of you early...
  18. Gen1 1.4L Turbo
    TRIFECTA: Billet bits for your Gen1 Cruze We will have these Forge wastegate's available for purchase in our online store real soon. Keep an eye out for an update from us about availability.
  19. Gen1 Powertrain
    I purchased a 2012 ECO MT with 55k miles in January of 2017, I love the car but sometimes it leaves me wanting a bit more... 2014 Buick Verano Premium, 2.0T, 6MT, 17k miles, salvage- runs/drives, $3k (PURCHASED) 2012 Chevy Cruze LS, 1.8L, 6MT, 195k miles, bad clutch, $3k (PENDING AS OF 5/23/18)...
  20. General Discussion
    So my drivers power door lock does not move with the keyless entry remote or the button inside the car. It does work manually with the key, and if you push the button down from the inside. Has anyone had one of the front doors from a GEN1 apart inside? It appears based on my searching that I...
1-20 of 37 Results
Top