Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Gen1 1.4L Turbo
    Hey, I'm looking to buy the OEM version of this part. It is the little clip with a peg, that holds the glovebox in. Does anybody know the part number?
  2. Gen2 Audio & Electronics
    Any idea what this box is? It's mounted next to the HMI on my car. My car has the 8" screen and no navigation. When I google I come up with HMI control module bypass. What in in the world is it for?
  3. Gen2 Audio & Electronics
    I was poking around in my 2018 Cruze and noticed no glove box light. The hole is there to snap one in however the wiring is not there. I pulled the whole glove box out to make sure the harness wasn't hidden and it definitely is not there. Did anyone's Cruze come with a glove box light? I...
  4. Gen2 Appearance, Body, Detailing, & Interior
    My glove box lid where the latch mounts has come off the glove box. Any ideas on how to remount this cover?
  5. Gen1 Audio/Electrical Tutorials
    Many of you have seen that GM was kind enough to leave the wiring behind in 2012 Cruzen so you can just plug-n-play a glovebox light. All of this is explained in the HOW TO: Install A Glove Box Light in 2012 Cruze by silverram323. Of course, GM being GM, the wiring was deleted on 2013 and...
  6. Gen1 Appearance, Body, Detailing, & Interior
    Hello All, Would anyone with access to the factory service manual happen to have the wiring diagram for the Glove Box Light? Trying to figure out where the power and grounds branch off from the main loom since GM decided to do away with the wiring that used to be pre-installed but is no more...
  7. General Discussion
    My Blow motor wont come on....... Fuses are good, Relay's are good, Resistor is good ( bought a new one and it blow great for a few minutes then went off. No hot or cold air at all...............
  8. Gen1 Appearance, Body, Detailing, & Interior
    Hello all. new to this forum :) I need assistance looking for these parts that hold the glove box from falling off. It originally only had 1 clip (bought the car used not too long ago and the clip broke). the car never came with the Wire spring as displayed in the pictures. I cant find these...
  9. General Discussion
    Hey Everyone:) Well i seen silverrram323 post on the 2012 Glove Box light and thought i would just purchase the light because it was only $4.32 for me but found that the wire is no longer there:( so my question is.. does anyone have a Soultion to making a light in the glove box? Maybe with the...
  10. General Discussion
    Found this in the glove box of my 2012 2LT/RS today. Looks like it's some sort of shipping label that probably came with the glove box while the car was being assembled. The CARFAX said my car first went on sale in March 2012 so the Oct. 2011 date could be reasonable. Any thoughts?
  11. General Discussion
    Hey folks - anyone have same experience. I've started to notice a regular ticking type noise that is coming from somewhere under the glove box where I think some of the A/C system must reside. The A/C works fine, but the noise is bothersome unless I have the radio up so loud I can't hear it...
  12. Gen1 Diesel General Discussion
    I recently traded my 2011 Eco 6MT for a 2014 CTD and while driving last night I had to grab something from the glove box... I noticed that the glove box isn't lit inside like it was in my old ECO. Not sure if it just doesn't work, or if they dropped that feature for the newer models?? Anyone...
  13. General Discussion
    So someone was trying to get me the shark fin antenna for X-Mas apparently, since I have been to lazy to get it myself and turns out, my glove box color code is wrong. The placard states: 04Y - Which is Luxo Blue Metallic. Yet my car is autumn metallic.. Which makes me think I either got the...
  14. Gen1 Interior Tutorials
    Last weekend I was able to replace my cabin filter in my Cruze 2010 (2L Diesel) Modal I tried to record what I did and posted here Since I was doing it myself and recording from my phone camera , I could not show it till the end. But you can see the crucial part of taking out the glove box...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Just got my headlights installed this past weekend! The glove box trim and scuff plates are really straight forward and cheap and easy to install mods which adds a nice touch of personalization to my car. Getting HIDs installed this Wednesday too.
  16. Gen1 Appearance, Body, Detailing, & Interior
    Hey everyone! This is my first thread here, just bought a 2012 Cruze LTZ RS about 3 weeks ago. I just installed my K&N intake today (which is amazing!!!) I have more planned for my car, but right now I was looking at a glove box trim. I was wondering if anyone else has purchased it and what...
  17. Gen1 Audio, Electronics & Electrical
    Does anyone know how to get behind the glove box to mount something that connects to the stereo? Sent from Free App
  18. Gen1 Audio/Electrical Tutorials
    It was talked about, and i did miss the light in my 2012. So i took the light out in my 2011 and wrote down the part number on it (13503057 F-lamp) and headed to the dealer. Yup its a good number, also used in various other models. It was $7.62 + tax of course, it took 6 days to get it to...
  19. Gen1 Appearance, Body, Detailing, & Interior
    Any ideas on what to do for a glove box lock? I really don't like that the entire car is searchable without a warrant and want some place I can lock.
  20. General Discussion
    I see in the specs. that when you add the Pioneer Sound System, you delete the auxillary glove box. I have looked at all of the pictures on the Cruze web site and in the brochure, but I don't see where it is. Can someone tell me where it is? Thanks. Jim
1-20 of 20 Results