Chevrolet Cruze Forums banner

grill

  1. Gen1 Audio & Electronics
    Hey I just got a 2012 Chevy Cruze, the previous owner blew out the rear deck speakers. I have new speakers and the adapters but I don’t want to break the speaker grill. I tried prying them up but I didn’t want to pry to hard in fear that I would break them. Do I just need to stop being scared...
  2. Gen1 Appearance, Body, Detailing, & Interior
    So I wanna make my cruze a little bit different then I've seen around. I wanna open up the front grill and replace it with a black mesh. So I'm no computer guy and I suck at photo editing. I made these photos in paint just using other photos I found online by copy and pasting and resizing. Just...
  3. General Discussion
    Hey all. This is my first post to the forum. I got my new 2019 cruze in November last year (due to someone totaling my 6 year old dodge dart :[ ) and unfortunately, after only having it for a couple months, someone has hit my center grill in a parking lot and the whole corner of it is damaged...
  4. Cruze Parts
    Looking for the front lower grill on a 2011 Chevy Cruze Eco. Here’s a link to it on Amazon, basically just looking to see if there’s anything used that is cheaper. Front Lower Chrome Black Grill Grille Assembly for 11-14 Chevrolet Cruze...
  5. Gen2 Appearance, Body, Detailing, & Interior
    Just finished my first DIY grill on my gen2 2016 cruze. It doesn't look too bad, I might do the top part again but let me know what you guys think!
  6. General Discussion
    Hi everyone! I’m trying to paint the chrome trim around my front grill. But, I can’t find any info anywhere on how to remove the chrome trim!! Can anyone help me out with!?!? Thanks in advance!
  7. Gen2 Appearance, Body, Detailing, & Interior
    Sup guys, so I want to black out my emblems and tint my head lights & tail lights. But I think it would look really awesome if I could black out the chrome trim with plasti-dip. Was wondering if anyonow knows if it just pops out like the ones on BMWs? Because if not it’ll be much harder than...
  8. Gen2 Appearance, Body, Detailing, & Interior
    Bought a 2017 LS two weeks ago. Gave it a wash and wax today, and noticed something for the first time - a small access panel on the passenger side, below the headlight, next to the grill. What is it for?
  9. Gen1 Appearance, Body, Detailing, & Interior
    Debadged the RS from both sides of my Cruze a few weeks back. I want to mount it on the driver side third of the lower grill. I know it's been done, I have a few ideas of how to mount it there. Can anyone share how they did it, and if some ideas didn't work?
  10. Gen1 Service Issues
    Hi. 2012 1.4 Cruze. 88,000 miles on it. Just got back from an extended road trip from Orlando to NOLA. When arriving in NOLA, after parking, I noticed white smoke coming from the left side of the grill (if facing the car). I thought maybe it was some steam from a puddle that we parked in (the...
  11. Gen1 Appearance, Body, Detailing, & Interior
    I just got my Cruze about two weeks ago, and was wanting to start changing the appearance a little. I've already blacked out the factory hub caps with plasti dip, and I like it a lot, now I want to do the grill. I was wondering if there was a way to remove the grill from the bumper cover...
  12. General Discussion
    I have a 2012 1.4L black chevy cruze. It's my first car and I really did not want it at all but my dad kinda forced it on me. I saved up $3000 and I thought I'd have some input in the car but I didn't. Would have prefered a wrx or something similar. Anyways I really dislike the look of the car...
  13. Gen1 Appearance, Body, Detailing, & Interior
    I can't find pics of the back of it or installation instructions. It looks like it clips into place, but I have an LS and I would assume there is something that needs modification. I found some for a tempting price, I just don't want to get tooo involved. Anyone done this?
  14. General Discussion
    Whats up! Well I've had my ECO for 3 months now 10,000 miles love it. Only prob so far is when a rabbit commits suicide! He went right threw my lower grill and shutters , shattered them!! SO my question is some protection, some billit alum., or stainless grill to protect add a little strength...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Is it possible to remove the pioneer badges from the speaker grills?
  16. Cruze Parts
    Hey guys just wondering if anyone knows of or is selling the Holden Cruze Irmscher front grill, really want one of these for my own car. Any help would be appreciated. Cheers.
  17. General Discussion
    Just leased my 3rd Cruze. First LS had a center dash compartment. Second LS had a center dash tray. The new 2015 1LT has a grill in the center, but I don't hear any speaker sounds coming out of it. Does this make sense? Thanks.
  18. Gen1 Appearance, Body, Detailing, & Interior
    I have a chevrolet cruse Ltz rs and I wanted to put a rs emblem in the front grill like a badge but the grill is closed off and my emblem has to be bolted on with small plates to keep it on the grill. Anyway I can get this on easily without removing the whole bumper? Thanks!
  19. Cruze Owner Projects
    I have a chevrolet cruse Ltz rs and I wanted to put a rs emblem in the front grill like a badge but the grill is closed off and my emblem has to be bolted on with small plates to keep it on the grill. Anyway I can get this on easily without removing the whole number? Thanks!
  20. Gen1 Appearance/Body Tutorials
    Since I won't be towing a trailer through Death Valley anytime soon, I made a grill block yesterday. Step 1: trace an outline of the grill on the back of a pizza box. I used some 0.06" thick ABS plastic from Amazon for $7 (shipping included). Step 2: Trace and cut out the ABS pieces and moosh...
Top