Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 70 Results
  1. Gen1 Appearance, Body, Detailing, & Interior
    I was looking at replacing my Eco lower grill (if removable/coverable) with the Rs lower grill insert flipped 180*. It looks light it might fit and was wondering if anybody had tried this before.... Kinda new here and searched but maybe somebody who's been here longer has seen something like...
  2. General Discussion
    After about 4 hours, on a VERY WINDY DAY :cussing::cussing::cussing: and alot of clean up, i finally was able to plastidip the front and rear of my car. Project Murder it out as begun... TIP: PLEASE whenever you plastidip anything on the car, leave sufficient space between what you are plasti...
  3. Gen1 Appearance, Body, Detailing, & Interior
    I was just randomly browsing the net and came across this Cruze. I LOVE the look of the front without the chrome outline. I would like to do it to my car. What do you figure is the best way to achieve this? 889692d1329512770-chevy-cruze-mods-250415_10150601234430293_790735292_18514220_3029957_n.jpg
  4. Fuel Economy
    Ok well the middle grill... (more pics below) So the Cruze Eco (which I don't have) has a lower grill block that's automatic; thermostatically controlled shutters, blah blah blah wish I had it. :) In reading lots on Ecomodder.com I have come to believe upper grill blocks are better; pushing...
  5. General Discussion
    Merry Christmas 2 ya´ll.... Found some time today to finally install my lower RS grill and plasti dip´d my diffuser.
  6. Fuel Economy
    I was thinking about how to get colder air inside the engine, without removing the resonator. After looking at the cruze's upper grill, I notice that it is a solid piece of plastic. So I wanted to start a discussion about the pros and cons. Or possibly grinding out the honeycomb design and...
  7. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone modified the US Cruze to fit the aftermarket Holden Cruze grills? As I am sure you would all know you would need to cut away the bar in the grill that holds the chevy emblem. If anyone has done it or know of someone that has can you post some pics to see how badly butchered or clean...
  8. Gen1 Appearance, Body, Detailing, & Interior
    I've searched and searched and searched and searched and searched. Any leads? I have nothing against Chevy, but I love the look of a badgeless front and rear. No make, model, trim, dealer, etc. Just paint and grill and trunk. Old VW/Audi habits die hard.
  9. Gen I
    looking for an oem upper grill the lower portion that goes under the bowtie. Im hoping someone installed aftermarket grills and has one laying around collecting dust. Thanks
  10. Gen1 Appearance, Body, Detailing, & Interior
    has anyone ever done this grill swap> i just found it while searching around. If not would it fit? Checy Cruze/Holden Cruze Carbon Fiber Grills
  11. Gen1 Appearance, Body, Detailing, & Interior
    this is my first post here, i just bought my wife a cruze. and i like this grill. anyone installed it before? looks like im goin to have to do some modifications to get this to work but i think it will look nice
  12. Gen1 Appearance, Body, Detailing, & Interior
    I ultimately would like this result on my Cruze. I would try to incorporate if possible this front bumper pictured, the grill and rim style. The kit I believe is from a Korean-spec Cruze and would like to know am I heading up an uphill battle trying to fit that grill on a US-Spec model? As far...
  13. Gen I
    Wife don't like it. It came with Cruze. (the insert not the wife) Grill just snaps in. $75 I pay shipping in USofA.
  14. Gen1 Appearance, Body, Detailing, & Interior
    Finally put the ltz wheels on! I went with 224/45/18 gereneral gmax after some long research only 580 from tirerack. I am very happy with them makes the drive very smooth and handling 50times better!
  15. Gen1 Appearance, Body, Detailing, & Interior
    I saw a Chrystal Red RS Cruze with the chrome grill from GM Accessories today. Looks pretty nice and would likely look even better on a black car. Not sure it's worth 400 Washingtons, but I like the look.
  16. Gen1 Appearance, Body, Detailing, & Interior
    First of all I'm new to the site just purchased my cruze about 90 days ago! Had a camaro ss and a explorer before this one. Anyways the grill turned out great had some help from a buddy. Took aboiut 2.5 hours. Yes you do have to take the bumper off but well worth it! Pictures dont do justice...
  17. Gen1 Appearance, Body, Detailing, & Interior
    I am going to be installing a polished eg grill this saturday. Since you have to take the bumper off is there anyway to take the chevy emblem off?
  18. Gen1 Appearance, Body, Detailing, & Interior
    ok... the RS model has the up turned lower grill as seen above in the lovely cruze talk banner. the ECO has the down turned lower grill (also seen above). Does anyone know if the honeycomb upturned insert on the RS could fit if it was turned upside down and placed into the lower grill of the...
  19. Gen1 Appearance, Body, Detailing, & Interior
    I am wanting to buy this rear lower bumper molding trying to get rid of the rear dull look but I guess the question is do I just removed the half looking cover and bolt this right up ????? eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
  20. Gen1 Appearance, Body, Detailing, & Interior
    Today I got around to putting on the grill I ordered from CustomCarGrills.com and I'll put the pictures up. Let me know what you guys think.....
41-60 of 70 Results
Top