Chevrolet Cruze Forums banner
guard
1-18 of 22 Results
  1. Gen2 Appearance, Body, Detailing, & Interior
    Hi, new owner here, hoping to learn and contribute to the forum over the next few years! Has anyone come up with a solution to add a cover or sill plate guard to work with the hatch handle groove on top of the rear bumper? I know it's just a matter of time before something gouges and splits the...
  2. Gen2 Diesel General Discussion
    While installing my xenon lights today I realized that the OEM filter has a snow guard sleeve around it. I quickly removed it and put the filter back in without the guard and now I notice more turbo / suction notice while under throttle. I'm digging this free mod! Sent from my SM-G965U using...
  3. Gen1 Appearance, Body, Detailing, & Interior
    I just installed one of these made by Lund or AVS. The box has both names on it. It uses double sided 3m tape to install, and install was very easy. I bought this car to use solely as a commuter car to/from work. So, I i drive it exactly 138 miles per day, round trip with 72 of those miles being...
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    **UPDATE** I solved the problem. I removed both wheels and had a good look at the rotors with a flash light. The top edges of the back rotor plates were awfully rusted... like disgustingly rusted. The rust was uneven, too. I rotated the wheel hub and filed off the major rust buildup around the...
  5. Gen1 Diesel General Discussion
    So since i am keeping this car i was price shopping and got a price for a zero deductible extended warr that would cover the car to 98k miles price was 1250.00 what do you all think normally i wouldnt get one but considering how complex this motor/transmission is i am thinking twice
  6. Gen1 Appearance, Body, Detailing, & Interior
    Hello, So I bought some Chinese splash guards. The front lines up perfect with the plastic rivet. Unfortunately, the plastic rivet is not long enough. Does anyone know where I can get one size larger rivet or other alternatives to installing these splash guards? Also willing to take a splash...
  7. Gen1 Appearance, Body, Detailing, & Interior
    I was wondering if anyone could explain/show how to install the Rally Armor universal splash guards on an RS package. The fronts look pretty simple, but how do I overcome the .5-1" gap between the end of the rear panel and the inner fender well? I've looked all over the forums and I can't seem...
  8. Gen1 Appearance, Body, Detailing, & Interior
    Hello, I recently purchased the OEM splashguards for my 2014 Cruze. Part #95489815. The instructions for the front guards was included. But there were no instructions for the rear guards. (I think the eBay vendor simply forgot them.) Can someone scan a copy and help me out? Thanks
  9. Gen1 Appearance, Body, Detailing, & Interior
    Not sure what I am looking for but I have only found a few options. I am looking for a protector of some sort for the lip of the bumper where the trunk is. Similar protectors for the bottom of the door jams would be nice. I have a '14 LT in black so chrome would be nice. Only change so far is...
  10. Gen1 Appearance, Body, Detailing, & Interior
    I have a new 2014. Was planning to scotch guard the seats. Have any of you done so and if so does it stink it up in there? Change the color at all? I really want to keep stains of the seats but don't want to get seat covers because...well I want to use the seats if that makes sense. Just...
  11. General Discussion
    So im wondering if anyone has ever tried this, I really like the factory cruze splash guards. But unfortunately they have yet to release a version that fits the RS package due to the side skirts taking up the space the guards would go. Has anyone tried finding a longer version of the black...
  12. Gen1 Appearance, Body, Detailing, & Interior
    I was thinking of getting a set of door sill guard plates as that's an area I tend to scratch up a lot on vehicles. Anyone have suggestions on a nice set? I have a Silver 2012 LT2 RS with the two tone brown/cream leather interior and was wondering if the OEM 19202364 set would look good on it...
  13. Gen1 Service Issues
    Has anyone else noticed the fitted mud guards causing damage to the paint on the front end? Both front guards snapped off in the cold weather and now after a good washing I notice the paint is grooved right down to the bare metal on both sides at the front around the contour of the outside edge...
  14. Gen1 Appearance, Body, Detailing, & Interior
    I am going to put installing rally armor spalsh guards on my wifes 2013 LTZ/RS this week/weekend and am wondering if anyone would like a write-up on the process.
  15. Gen1 Appearance, Body, Detailing, & Interior
    It stayed attached to the car at least. Hit something on the highway, didn't even feel it.
  16. General Discussion
    I am in the process of welding a light weight custom brush guard for the front of my cruze with some KC lights. I will post pictures of it when it is finished. Does anyone have any ideas for some type of body modifications I could look into welding for my cruze? I just finished putting custom...
  17. Gen1 Appearance, Body, Detailing, & Interior
    After searching through the form by using the google custom search bar, i have not seen any posts about "rally guard's" or rally style mud flaps on this form. im curious to know if anyone has made some or if they have bought some pre cut for an other make of vehicle and put them on your cruze...
  18. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone added anything to their rear bumper? Whether it be the plastic, rubber or metal type? Any comments on how these have held up would be appreciated. I have noticed that I have been using my trunk to carry things more than I expected. I just ordered the following and hope it helps with...
1-18 of 22 Results
Top