Chevrolet Cruze Forums banner
hids
1-20 of 22 Results
  1. Gen2 Appearance, Body, Detailing, & Interior
    Hey guys, so I know there has been a lot of talk about dustcovers. But I haven't really seen any specific ones that people have said work well and for what type of headlights. I am waiting to install my XenonDepot HID kit until I can find a good set of dustcovers. I thought about just drilling a...
  2. General Discussion
    Has anyone installed Hids into factory reflector using the Casper guard?i seen someone on YouTube make it out of 1/2? pipe. Looks like it might work,any advice would be appreciated
  3. Gen2 Audio/Electrical Tutorials
    Allright guys, i decided to put in a set of HIDs that I had laying around. Day 3 of ownership, mod 2. Ill give a quick overview of how to do it, and reference images. Our cars (with projector lenses) use 9005 bulbs. This is a picture of a HID bulb, ballast, and igniter. The ballast and igniter...
  4. Lighting
    Hi I have these headlights. I got them installed acouple weeks ago and now i want brighter. Anyone have exp with h7 to hid replacing in this set? I have kensun kit on order with relay harness and anti flicker capacitor from amazon, but are relay and cap really needed ? do they affect daylight...
  5. Gen1 Appearance, Body, Detailing, & Interior
    Hi I just got my Cruze and wanting to put Hids on it headlights and fog I need to know what k need to do?
  6. General Discussion
    I'm very new to the site and have no idea if I'm even posting in the right place, so i'll apologize in advance. I have a 2011 LT Cruze and want to get some new headlights and fogs installed with HIDS. What are some reliable places to find some. Also would the GM dealer I purchased the car from...
  7. Lighting
    Why would the check engine light come on with HIDs? I used a bi xenon kit which connects to one socket, and included the warning ca fellers. Anyone else had similar problem? solutions?
  8. Gen1 Appearance, Body, Detailing, & Interior
    hey guys im new i just got a 14' cruze rs turbo and im install hids and i got racesports from work and im new to this wiring sent up h13s for my headlights. there just a black and red prong? do u just put them in the power and ground holes in the stock connector? i did that and they work in all...
  9. Cruze Owner Projects
    I posted a couple weeks ago because I had some trouble with these lights. Well i figured it out and got them done, so check em out!
  10. Gen1 Diesel General Discussion
    Added projector headlights and HIDs to my CTD. Had to remove the front bumper - PITA. Other than adding the ballasts for the HIDs - the rest of the job was easy. Here are a couple pics. In the first pic you can see the stock intake snorkel. -gt4fore
  11. Lighting
    Here is a side by side comparison of new 8k HIDs vs the Phillips X-treme vision bulbs (only 1-2 months old) I havent taken any newer pics yet. But Ill be sure to update. Check em out. Thanks night
  12. General Discussion
    Well I know this may start an argument if others get involved that don't like hids but hey its my car. I do what I want with my car. Anyway, I called up Hidextra.com and spoke with a salesman and long story short I bought the wrong hid kit. He told me the hi/lo kit is for people that won't use...
  13. General Discussion
    Hey I'm just wondering before I put them in, is there any massive work that needs to bed one to put in hids in this car? I have already put subs and an amp in hooked into the stock deck (new deck in a couple months) so I do know a bit about wiring. I'm really just curious are hids hard to put in...
  14. Lighting
    I ordered a kit of HIDs for my 12 Chevy cruze and for some reason they wont work! I wired them right, even tried a second set of HIDs and they do the same thing.... Heres what happens..... When I go to turn them on one side flickers and one side will light up fine Sometimes the driverside...
  15. Lighting
    I'm getting ready to do my retrofitting project and I was want sure I have everything I need. I'm planning on ordering the BI-XENON MORIMOTO MINI STAGE III KIT (H1) from trs but I know I'll need some sort of harness such as the one ZZP sells - ZZPerformance - HID Relay Harness #ZZ-HIDRLYHNS-G2...
  16. Lighting
    i bought hids from philipshids.com and got them installed two days ago. what i noticed when i got home and shut the car down and then turnt them back on was that only the right side turned on. then i turned them off back on and then the left side came on slowly. sometimes they start fine and im...
  17. Lighting
    Hi there I got a Kensun bixenon HID kit and was going to do it in the stock housing. Now I am considering doing a prebuilt projector housing from one of the vendors here. If the housing accepts regular single xenon HID bulbs, will it accept bixenon as well? Is there a bulb size difference? I...
  18. Lighting
    Hi there I have gone through different brands of bulbs and none have really done what I've wanted, or they go out pretty quick. I have experience with HIDs on other cars both projector and standard type housings (99 Acura TL HIDs from factory). Really I have read all the ins and outs of HIDs...
  19. Lighting
    Well, after having a chat with an OPP Sargeant I've installed my HIDs. Allowed here in Ontario as long as they are aimed properly, not more than 6000k, and your DRL function still work. From what he said, the law here specifies colour, and not intensity, THAT BEING SAID, please of course always...
  20. Lighting
    hello guys installed hids in the cruze but they are flickering a bit. anyone with the same problem?without those canbus error canceler the right one even turns off sometimes. there inst many info in the web for our car but ive read this problem related with other vehicles and i think i hav to...
1-20 of 22 Results
Top