Chevrolet Cruze Forums banner
1-19 of 116 Results
  1. Gen2 Audio & Electronics
    I just bought a new car in Melbourne, Australia.....a Holden Astra Sedan MY18. It's a rebadged Chevy Cruze built in South Korea. Other then being RH drive almost everything about the car is nearly identical and certainly the closest thing I can reference when working out what I need to do for...
  2. Gen1 1.6L & 1.6L Turbo
    Hi everyone, I have a 2014 Holden Cruze SRi here in Aus, and I've had 2 break-ins recently where the alarm didn't go off for either. The car was locked on both occasions, with the red light on the dash lit up when the 'alarm' is activated. The first time the doors and boot were left open...
  3. General Discussion
    I have an Australian built Holden Cruze 2012 equipe JH 1.8 with a manual transmission. After washing the engine bay. Car would not start. Have had it looked at and have been informed that the ECM ( engine control module) is water damaged. It sits next to the battery and is not the ECU which is...
  4. CruzeTalk New Member Introductions
    Hi everyone, new to the forum. My name is Blen, I'm from Australia and have been an onwer of a MY14 Holden Cruze SRI-V 1.6T hatch for 3 years now. Love the car! I have decided to do a few mods to it.. it is booked in next week for some 20" rims and XYZ coilovers. Future plans is to get a full...
  5. Gen1 Service Issues
    Hi guys, Little stumped here, I had my oil cooler o-rings changed just last month big job but was previously leaking oil all over the place.. I inspected the underneath of my car just the other day and noticed some oil builtup around what I'm sure is the intercooler pipes? see attached...
  6. Bad News Racing
    I live in Australia and I'm unsure if BNR will be able to tune my Cruze. It's a 2011 Holden Cruze SRI 1.4 Turbo (manual). Thanks, Muz...
  7. General Discussion
    I'm on vacation/holiday in New Zealand and for a rental decided to go with 2016 Holden Cruze hatchback because I figured it would be more familiar so I wouldn't have to worry about that on top of driving on the left. Set up is about the same as my 2014 with some obvious differences. One thing...
  8. General Discussion
    Hi all I'm having a lot of difficulty in sourcing a service/repair manual for my 2009 Cruze diesel, I've seen a lot of them online for newer models especially the petrol variants but nothing for the Z20S1. Does anyone here have a PDF copy or know where I can obtain one?
  9. General Discussion
    Having trouble finding a solid answer, this engine is like a ghost according to the internet. I use Torque to monitor on the fly and vaccum is 0.3inHg and on "full" boost is 34 PSI while going up a hill. Anyone have any idea on what the max boost of this Diesel engine is? My elevation is...
  10. CruzeTalk New Member Introductions
    Does anyone have the torque settings for the following: Flex plate Torque converter Engine mounts Any help would be highly appreciated! Thanks so much!
  11. Gen1 Audio & Electronics
    Hi, my wifes car is a 2009 Cruze 1.8 CDX, the Korean made one, anyway, water got through the seal on the rear ECU Plug, and water got into the ECU and fried it, it looks like just a few fried Caps, but instead of repairing it as there is a few other corroded looking bits, I am looking at...
  12. Gen1 Diesel General Discussion
    Hi everyone I have a 2010 jg holden cruze with 157000kms on the clock. There is 1 issue with the car it starts and idles fine then when you drive it and start to load the engine up when its temperature is cold the car jerks backwards and forwards and engine light flashes until you push the...
  13. Gen1 Appearance, Body, Detailing, & Interior
    Hey everyone. I've had my Cruze Equipe for a couple of years now, bought a 2014 hatch new from the dealer. As I'm in Australia mine is a Holden, but I assume that's the same as the Chevrolet but with better badging :moon: I've been looking at doing something with the trims on the steering...
  14. CruzeTalk New Member Introductions
    Hey all! I'm George, originally from the UK, living in Australia. Currently in the recruitment process for the Defence Force here. Figured in my time away from school before I hopefully join the Army, I'd have a crack at doing some DIY mods and maybe a few cheap ones on the 2010 Holden Cruze...
  15. General Discussion
    Just read online that Holden is replacing the cruze with the astra in Australia for their 2017 me model Is this happening in the states as well?
  16. CruzeTalk New Member Introductions
    Thought i would share with you guys my new Cruze from Australia :)
  17. CruzeTalk New Member Introductions
    Hi guys, im new here just purchased a 2013 Cruze and loving it, 83k on the clock (km) just one thing the average speed and average fuel economy on the DIC don't change although i would of thought they would does anyone have an idea on that? Thanks :)
  18. CruzeTalk New Member Introductions
    Hi everyone. New to this forum and wondering if someone can help. I have recently bought a 2020 cruze cdx and the engine has seized (from previous owner). Just wondering if the engine on the 2014 models 1.8 petrol will fit in to mine? Thanks in advance.
  19. Gen1 Diesel Technical Discussion
    Does anyone know if the oil extractor vacuum pumps for DIY topside oil changes will work on a 2012 Holden Cruze Diesel? Has the Series 2 Diesel Engine - GM Family 2 VCDi. Just want to know if the extraction tubing will reach all the way to the bottom of the sump through the dipstick tube...
1-19 of 116 Results