Chevrolet Cruze Forums banner
holder
1-19 of 33 Results
  1. Gen2 Appearance, Body, Detailing, & Interior
    I have a 2018 LS and there is no compartment in the dome light for sunglasses like many other cars. Does anybody have a good idea to store glasses besides on the visor? Is there an upgraded dome light assembly that does have a compartment?
  2. General Discussion
    I bought a cell phone holder on eBay that fits in air vent or CD player slot. I have a 2013. But the air vents are too small for the holder to fit in and I had to use the CD slot. But after a few months it started to warp from the Sun/heat and it's not staying tight in the CD slot. Does anyone...
  3. General Discussion
    Hello, I came across a few older threads asking this question but the suggestions weren't the best. I own a 2015 Cruze LT and during some of my longer trips, it'd be pretty nice to have something I can mount my phone on (I have an iPhone 7) preferably above the dash. I don't want a vent...
  4. Gen2 Powertrain
    Hey guys, Is there a gauge holder/mount for our cars other than a piller pod? I would like to install a boost/vacuum gauge but I do not know where I could mount it. Side Window Piller has an air bag , correct? 2018 1.4 Thank you.
  5. Cruze Parts
    Looking for a Gen 2 Cruze front license plate holder that will fit the Gent 2 RS front bumper. Ideally, one that includes the needed hardware to mount. :th_coolio:
  6. General Discussion
    My wife has a 17 Cruze and we need a drink holder of some kind for the back seat. Anyone found a kind they like?
  7. Gen2 Appearance, Body, Detailing, & Interior
    Looking for the larger plate holder found outside of the US market on most if not all Cruze models. Anyone have a source for hard to find parts such as these? Argentinian built Cruze Chinese Built Cruze (looks like the lower grille plate holder is molded?) Cool blue too!
  8. Gen1 Appearance, Body, Detailing, & Interior
    So I am the second owner of my Cruze. The previous owner wasn't too kind to the floor mats resulting holes and stains, thankfully its not on the carpet just the mats. For now I have taken them out and replaced them with some universal fit ones from Amazon. They're smaller than the OEM mats so...
  9. Gen2 Audio & Electronics
    I've recently begun searching for a good cell phone holder for my 2016 Chevy Cruze. My ultimate goal is to be able to use a map app other than Google maps, which rules out Android Auto. Hence the need to place my cell phone on a holder where I can see it. Unfortunately most of the posts I've...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Hi, Safety first, i'm not talking about turning off the brake light. I want to turn the interior cluster and radio display on and off, because they are not dimmable when you use the spring loaded knob to turn the automatic lights off. All the exterior lights - sans brake light - turn off with...
  11. Gen1 Appearance, Body, Detailing, & Interior
    My 2015 Cruze cup holders look like this: http://file.kelleybluebookimages.com/kbb/vehicleimage/evoxseo/xxl/10533/2016-chevrolet-cruze%20limited-cup-holder1_10533_066_640x480.jpg But my friend has a 2013 2LT and her cup holders look like this...
  12. Cruze Parts
    Trifecta red cable, $100 shipped Trifecta red cable, $100 shipped.
  13. Gen1 Appearance, Body, Detailing, & Interior
    New to the site, I just bought a 2011 ECO with 26k miles on it on 3/5. After a day or two driving I was frustrated about not having anywhere other than the passenger seat to put my phone. I have an HTC One M8 which is fairly big, and it's in a UAG case. I bought one of the vent mounts from the...
  14. Gen1 Appearance, Body, Detailing, & Interior
    HEY GUYS DOES ANY ONE HAVE A CLUE HOW TO REMOVE THE FRONT LICENSE PLEASE HOLDER PLASTICK FROM THE FRONT BUMPER? I DONT NEED IT IN ARIZONA AND I HONESTLY DONT LIKE IT ON THERE BOTHERS ME. LOOKS LIKE IT HAS SOME RIVETS BUT I DONT WANT TO BREAK OR MESS UP MY BUMPER. THANKS FOR THE HELP!:th_salute:
  15. General Discussion
    Yet only 2 Screw holes to mount the License plate, same goes for the rear, two top holes only? Was the bottom Robot not working that day? Plates rattle when they are not screwed in, and when there are no holes available, this seems plain wrong on my 2014 CRUZE? What's the deal with the $15 Front...
  16. Gen1 Appearance, Body, Detailing, & Interior
    Do you think this would be a tricky install? LED Cup Holder Lights Blue Lights Fits 2012 2013 Hyundai Veloster Cupholder | eBay This company makes them for a lot of cars and have specific instructions. The Cruze is next on his list but he has a custom instal kit but no instructions has he...
  17. General Discussion
    Thought this was interesting. I was looking at the GMaccessorieszone.com website and noticed there is now an Ambient Light Kit for the foot wells and cup holders for the Cruze. $400. Wow that's expensive! I'd love to have the cup holder lights though, might be a nice splurge? Anyone else...
  18. Gen1 1.4L Turbo
    Hey guys, looking to remove the plate holder as I am ordering the cxracing inter cooler and putting on chrome grill covers. However it appears the holder is screwed in with and odd screw .( not a Phillips, flat, or torx bit). Anyone know what toll I need??? Thanks! Sent from AutoGuide.com Free App
  19. Gen1 Appearance, Body, Detailing, & Interior
    No Ashtray or Cup holder on 2013 Cruze? Hi, I'm new to the forum and have a new 2013 Chevy Cruze. I'm trying to find out where I can order a safe ashtray since there isn't one in the vehicle... :question:Or a cup holder that holds safely my "cup" ashstray - because the sides of the inside of...
1-19 of 33 Results
Top