Search Results for ‘hose’

2013 @ 209k Blew top radiator hose a few days ago - clamp slipped off. Opinions on doing the following - was going to do a "preventative maintenance" anyway in a few months. Replace: Water pump Thermostat Upper radiator hose Lower radiator hose Hose from back of water pump Large hose from...

Hey all. I'm trying to get an I.D. on the hose that is below the oil cooler hose. It's the larger hose that runs from that neck to what looks like the bottom of radiator on driver's side. I can't find a name on it to order a new one. It's the hose that is leaking and not the usual suspect (the...

Is this considered the lower radiator hose? I have a hole in it and need to replace

I had to replace the hose on my '14 Cruze because I was driving and saw smoke, pulled over, and the upper radiator hose was spewing coolant! I took it home and un-did the hose and notice the actual water outlet was broken! Anyone have any ideas on how exactly this piece was damaged like this...

Trying to put on my catch can but dont know how to remove the pcv hose from the turbo intake

Does anyone know if the corrugated hose that snaps onto the top of the intake manifold is supposed to be air tight? I recently replaced my intake manifold but the hose connector is wanting to slip a little up and down and it wants to suck air in. Can't figure out what I am missing. Thanks Cruze...

I had the L shaped cooling hose that runs from the water outlet to the engine cooler burst right near the hose clamp on the engine cooler end the other day. Has me concerned that other hoses carrying coolant might do the same now that this 2012 has 122,000 miles on it. Planning on replacing both...

Hey everyone, I’ve recently changed my thermostat and housing on my 1.8l Cruze but it is currently leaking from the top hose that runs from the housing to the other side of the car behind the engine, I believe it is some kind of vacuum hose? I know it is broken at the piece that plugs into...

2011 Cruze LTZ 131k miles, salvaged car. Missouri USA. Hello, I'm looking to replace the piece highlighted below. I looked for a Cruze in a Salvage yard and there's none within 300 miles of me. The part in question was put into my car upside down and was stripped/scraped before I bought...

Anyone use a different setup other then keep replacing the factory hose?

Hi Everyone. I've lurked on here for awhile but just registered yesterday. I've searched all through here for the answer to my question, and I think I found it, but I have a backup question. I've been getting a P0236 and P2227 codes. Inlet Air Temperature and Barometric Pressure. So I first...

Dear forum, I recently bought a 2016 1.8 MT Cruze Gen1 (one of the last G1's). It's completely original, with 10k miles on it. While cleaning and checking fluids, i've noticed the hose that goes from the brake fluid reservoir to the clutch pedal has no retainer what so ever, on the reservoir...

Hey guys i have a 2013 cdx 2.0l diesel hose from the throttle body to the intercooler got quote $800 from holden.

Some one please tell me how to get this part off of a 2015 Chevy Cruze LT 1.4l Turbo. Bottom plastic connector from the fire wall

Looking to buy the PCV Hose that runs from the turbo to the intake with the PCV intacked on the turbo side. If you have one please PM me with a price shipped to 44833. Thank you

So I bought this car last October. Last night engine light came on. So while I was looking at the engine I noticed this hose was broken off. Looks like the old owner glued it back down. Was just wondering what the hose was called so I can get one

Hi all, I have a 2011 1.4 turbo that has about 102,000 miles on it. Ove the last few months it seems all I'm doing is changing leaky hoses! Now the latest is what seems to be a turbo coolant hose that goes behind the exhaust manifold heat shield. I'll attach pics. Any help would be greatly...

Hi, I have the p0171 code (again) and want to rule out the corrugated hose that runs from the intake to the turbo inlet as the cause. Just wondering if someone here has already done a write-up on how to remove and test this hose. I know how to remove it from the intake end ( thanks XR) but not...