Chevrolet Cruze Forums banner
housing
1-20 of 59 Results
  1. Gen1 Appearance, Body, Detailing, & Interior
    Hello, I recently purchased a 2014 Holden Cruze JH SRI-Z 1.6L turbo hatch and somehow didn't even notice the panel above (& behind) the interior rearview mirror was completely absent. I went to a caryard today to find a replacement and the one I picked up was from a 2011 Cruze and it is too...
  2. Gen1 1.4L Turbo
    Is it necessary to drain the coolant before replacing the thermostat housing? Will it dump a lot of coolant if I don't? Have a 2015 with the 1.4l turbo and a check engine code for P0599 "Thermostat Heater Control Circuit High". No other symptoms or leaks evident. Thanks for your help.
  3. Lighting
    I found these a few days ago and almost bit, but then read some more and compared to some WinJets. I really like the looks of the dual pods, but none of the reviews are very favorable. I recently also read about a number of Cruzers who have retrofitted the WinJets. I do not have any details...
  4. Gen1 1.4L Turbo
    Been searching posts and google the last hour and can't find exactly where the weep hole is located on the water pump. Can anyone maybe circle or highlight it in a photo and post? Here is the recall bulletin if that helps.https://gm.oemdtc.com/540/engine-coolant-leak-from-the-water-pump My '12...
  5. General Discussion
    I have found an oil leak collecting under the oil filter housing onto a bracket underneath. I cleaned it off with brake clean yesterday drove it around and didn't notice anything leaking. Started the car this morning drove it around and saw the oil coming from the engine onto the bracket. I...
  6. Gen1 Service Issues
    2011 Cruze 1.8 LS Just replaced the thermostat housing. Put it back together and have a coolant leak at the 90 degree elbow that plugs into the top stem. Upon examination, part of the old 90 degree elbow and the o-ring were broken off in the old housing. Having a hard time to find a diagram...
  7. Buy/Sell Classifieds
    i am looking for a junked turbo housing. i am wanting to test airflow with different downpipes. thanks
  8. Gen1 1.4L Turbo
    Hi all. I have a 2013 Cruze with the 1.4l engine. It was leaking oil from the oil pan and oil filter housing assembly. Upon removing the oil filter housing a piece of it broke off and I got a new oem filter housing from the dealer. I resealed the oil pan and and got it all back together with...
  9. Gen1 Powertrain
    So awhile back, my check engine light came on. I checked the codes and there was three that related to my thermostat. I talked to the auto store guys and they said its pretty common to replace them because they are originally made of plastic and tend to crack. I did some research on my own and...
  10. Gen1 Powertrain
    So, I was changing my oil yesterday and accidentally bumped the tip of the return tube with a pair of channel locks and broke it off. Everything is intact except the little nipple on the end. I’ve scoured the internet and it appears the only fix is to replace the entire oil filter housing. What...
  11. Gen1 Powertrain
    I can't believe this thing. It's a 2013 Chevy Cruze LS we got at about 80,550 miles and now just under 90,000 ans so far, it got a new catalytic converter, oil cooler repair, broken driver side power window - glass is good, just doesn't go up or down, new coils and now I'm replacing the...
  12. Gen2 Appearance, Body, Detailing, & Interior
    Has anyone else had this issue with their Gen2 sedan? I've been babying my Cruze for the past year, with 3-bucket washes and multiple layers of protection. However, I noticed one small crack in the (I forget the proper name for it) plastic surrounding the brake light above the rear windshield...
  13. Gen1 Service Issues
    I have found my coolant leak...Sort of that is...coolnt is being deposited in the cavity of the oil filter housing..Has anyone had tghis issue ????? I can not see it dripping from any where im thinking i have a small oinhole or something in the cavity..If anyone has any imput let me know..Thanks...
  14. Gen2 Audio & Electronics
    I've seen a lot of posts here about converting to LED lighting for headlights, interior lights, rear lights, etc., but nothing about converting the rear turn signals to amber LED. Does anyone know if this is possible with the OEM tail light housing? I like the design of the turn signals and...
  15. Gen1 Diesel General Discussion
    I took my car in today after I noticed it being wet on the right side (transmission side) of the engine bay and on the bottom cover. I thought perhaps the transmission cooler lines were leaking but they called back and said it was the "oil sensor housing"... What exactly is that? I couldn't find...
  16. Gen1 Diesel Technical Discussion
    Hello Everyone, I have searched the Gen 1 CTD threads and I could not find anyone having this problem. I changed the oil this weekend and found the bottom of the oil pan once again covered in engine oil. The leak appears to be coming from above the oil pan near the engine oil cooler/oil filter...
  17. Cruze Owner Projects
    Hey everyone I wanted to share a build project I am starting and get some feedback and input from you all. Over two years ago I bought these: ANZO USA | CHEVY CRUZE 11-15 PROJECTOR HEADLIGHTS BLACK w/ HALO (LED LOW-BROW DESIGN) and now they need some serious updating/upgrading. The LED strip...
  18. Lighting
    long story short my used cruze ended up having an aftermarket headlight housing kit, the Eagle Eye GM555-B1WU0-3V. does anyone have any videos or tutorials on how to install LED headlight kit into this sort of housing? i have the correct bulb sizes just would appreciate a tutorial thanks!
  19. Gen2 Audio & Electronics
    Hi, new to the forum and cruze, not to the delta platform. The manual for the cruze is intentionally missing a considerable amount of info, which is quite frustrating. it implies the headlights and most other bulbs are not replaceable, but unlike my acadia, where everything besides the...
  20. Gen1 Powertrain
    Hello all, I'm not a Cruze owner, but I do own a Silverado. I'm working on a friends car and need a little help. I removed the thermostat housing today, and the small diameter hose/pipe that attaches to the top of the housing broke. The pipe in question has a plastic fitting and runs to the back...
1-20 of 59 Results
Top