Chevrolet Cruze Forums banner
idle
141-148 of 148 Results
Advanced
  1. Gen1 Service Issues
    got a 2012 1.4t rs 6spd at a stop light in neutral the spedo spikes to 80mph and the radio gets loud. only for a second, the dealer had the car for two days claimed to have done nothing. i know there was a TSB for the BCM needing update. it would only happen occasionally but not since the dealer...
  2. Gen1 1.4L Turbo
    So no one at the shop could figure this out all day. Not to say they cared or tried very much, but it is bugging me so I was keeping an eye on it to see if I can figure it out or learn something. It's an LTZ with just under 5k miles, all stock. Complaint is a random misfire at idle, especially...
  3. Gen1 Powertrain
    I thought I would start a new thread so the resolution isn't buried. I am noticing many more people coming forward with the same annoying problem. You will know if you have it! Just feel your steering wheel or even brake pedal at idle or in park when hot (AC Off!). Its that awesome repetative...
  4. Gen1 1.4L Turbo
    I know when you come to a stop by default the trans goes into neutral to lower the idle speed to save fuel. I have only owned my Cruze about 72 hours but I notice when I come to a complete stop the idle is rough or vibrates. When moving there is no issue and purrs like a kitten. Is this normal...
  5. Gen1 1.4L Turbo
    Had a "buzz/tinny rattle" at idle you could here when outside the car at the front. Was checking the engine when cold this morning and discovered the heat shield for the exhaust manifold was loose at the bottom bolt. Tightening didn't help so installed a washer and retightened the bolt. "Buzz"...
  6. Gen1 Powertrain
    And its back! I am getting that consistent vibration/pulsating at idle in drive or park when hot. Its seems to be on hot days but that shouldn't matter. I am not using the AC at all! I like having the windows down. It usualy starts after about 10-15 miles. If I shut it down for a few and start...
  7. Gen1 Powertrain
    Cruse 1.4T So my engine starts smoothly and run under acelleration smoothly. I notice when it is up to temperature, it idles a little rough. I figured this is normal for a 4 cly motor. No service codes at this time. Is this normal, or do I have a problem?
  8. Gen1 Service Issues
    I've noticed a couple of times now when I'm sitting with my foot on the brake while I'm idling a stoplight that the RPM will drop to about 500rpm (it normally sits around 1000rpm at idle) and the engine will "rattle" as if were going to stall. Has anyone experienced this or know what it might...
141-148 of 148 Results
Top