Chevrolet Cruze Forums banner
instructions
1-15 of 16 Results
  1. Gen1 Appearance, Body, Detailing, & Interior
    What’s up guys! Got a 2012 LT, about to install an aftermarket headlight assembly with DRLs, as well as fog lights that function as DRLs. As much as I’m a fan of trial and error, or using a multimeter to test the voltages of the headlight various wires to determine their identity, I’m also a...
  2. Gen2 Audio & Electronics
    Greetings, I have a pair of speakers I want to install in the dash, but the plastic gets in the way. They'll fit once i get past the plastic and into the metal framing underneath. I've looked for instructions on how to remove the dash and haven't found any. Has any one done it or know how to...
  3. Gen1 Diesel General Discussion
    Want to give shout out to Harley GTP for putting together the instruction package with info passed on from StarSpangled and Aaron on the delete kit. No instructions are provided by fleece or Oz on this. I put mine on yesterday and the photos and detail helped immensely. Wouldn't have been able...
  4. CruzeTalk New Member Introductions
    Has anyone installed the #13478514 illuminated sill-plates in a 2017 Cruze Hatch? If so, and you still have the instructions, it would be great if you could post them here since I want to see how the electrical connection is made. I was hoping that the connector would be below the factory sill...
  5. Gen2 Service Issues
    HEAD LIGHT RECALL-50190 General Motors has decided that certain 2016 model year Cruze LT and Premier vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108, “Lamps, Reflective Devices, and Associated Equipment.” The headlamp lenses in these vehicles are not marked...
  6. Gen1 1.4L Turbo
    I've found multiple posts but not any exact SOP notes on the task. I've learned this from previous posts: - Trans fluid temp needs to be around 175-190F - When removing the drain plug, just over 4-quarts should drain - You'll probably want to repeat within 5000 miles - Use this fluid: Dextron...
  7. Gen1 1.4L Turbo
    been looking for the full instructions for removing and replacing the PCV tube that runs down to the turbo. if anyone has them id sure be appreciative. mine decided to get brittle and break on me.
  8. General Discussion
    Hello everybody, Does anybody know If there is any step by step or video to remove and install a turbo on a 1.4l cruze.
  9. Gen1 Appearance, Body, Detailing, & Interior
    Hello, I recently purchased the OEM splashguards for my 2014 Cruze. Part #95489815. The instructions for the front guards was included. But there were no instructions for the rear guards. (I think the eBay vendor simply forgot them.) Can someone scan a copy and help me out? Thanks
  10. Gen1 Audio & Electronics
    I could have sworn I saw a topic a while back with step by step instructions on how to install a sub, new door speakers, and two amplifiers with the existing my link head unit. I've done a search and come up empty. If anyone knows where that link is I would appreciate it if you would post to...
  11. Gen1 1.4L Turbo
    I took my 2011 Eco in for it's first dealership warranty visit and didn't remove my Trifecta Tune. The fix for the speedometer required an ECM update but GM dealer was unable to load it so they put a new ECM in my car. Oops, there goes my tune...... Now I need to reload it onto my new ECM but...
  12. Gen1 Wheels, Tires, Brakes, & Suspension
    Out of curiosity, do any members with spring lowered Cruzen still have the installation instructions? I ordered a set of B&G S2 lowering springs and oddly enough the kit did not include instructions, nor does their website have any that are downloadable. I have experience lowering cars but as...
  13. Gen1 1.8L
    I installed an INJEN CAI on my 1.8 cruse today and although I am very happy with the product, I regret to say that I am completely unsatisfied with their included instructions. First, the instructions tell you to remove the stock air box and intake first. This does not work out well because...
  14. Gen1 Powertrain
    I was curious about whether the breather unit in the wheel well had to come out which means removing the front bumper or partially removing it. Well, I found their instructions. :) http://www.knfilters.com/instructions/69-4521_inst.pdf
  15. Gen1 Appearance, Body, Detailing, & Interior
    Hi Everyone, I just go my Cruze LTZ and I could not get the RS package. I would like to install some fog lights and I would like to use the regular light switch for activation. Are there any instructions out there that I could get access to? Thanks, DLuck
1-15 of 16 Results
Top