Chevrolet Cruze Forums banner
intake manifold
1-12 of 12 Results
  1. General Discussion
    2014 Chevy Cruze 1.8L I have multiple codes that have been haunting me. Right now they are: P0171 P0133 P2301 P2077 I have replaced the O2 sensor (downstream of cat) and the coil pack. First with aftermarket, then with OEM parts. I have since put in new spark plugs, fuel injectors and rail, and...
  2. General Discussion
    2016 Cruze limited upgraded intercooler, Intake, coil pack, and bnr tune Was driving along the other day and all of a sudden tons of thick white smoke blasted out the ass of my car. mechanic said pcv valve broke and forced oil thru my oil catch can and into engine soaking spark plugs and...
  3. Gen1 Powertrain
    Hi all, been lurking and soaking up info in the background here intermittently for ~2yrs. Thanks for all the help already. I'm working on a 2012 LT, automatic 1.4L. Location; NC, US. Not current on the mileage, but I'd guess ~160k. I do have a repair project I'm working on and would...
  4. General Discussion
    Hello all, new to posting here. Can anyone explain how to figure out what generation cruze i have? Its a 2014 1.4L and im pretty sure its not the turbo edition.. I just had the camshaft / valve cover replaced for the second time by my local chevy dealer which was under warranty with the new...
  5. Gen1 1.4L Turbo
    I recently bought the Racer X Fabrication Intake Manifold with PCV fix kit and I’ve had a hard time figuring out how to install it It comes with directions but I’m not sure about certain things like cutting the brake booster line to basically retrofit it I’m trying not to mess it up but I can’t...
  6. Gen1 1.4L Turbo
    So my cruze is a 2013 with 119000 miles, i absolutely love the car but lately it has caused more problems than I can afford. Let me explain: So originally i had the dreaded pcv failure at the valve cover, at the time i could only change the valve cover, well it leaked very little in the front...
  7. General Discussion
    In April of 2019, our 2012 Cruze with just 47,600 miles started running rough. The dealer said it was the PCV valve, camshaft cover and intake manifold. The total repair cost us $903.01. I searched online for several hours and found dozens of owners with the same issue. I talked to 3 GM...
  8. Gen1 Service Issues
    Hey guys, A little bit ago I had the hissing valve cover and the missing orange dot on the intake manifold on my 2012 Cruze Eco automatic. I replaced both the valve cover and the intake manifold, making sure to put some RTV on the seams. I'm happy to report that the car feels like it's running...
  9. Gen1 1.4L Turbo
    Quick overview. In order, these are the issues and parts that have been replaced on my wife's Cruze 1.4T. Valve cover do to vacuum leak/torn diaphragm. Oil cooler, mixed oil and coolant throughout. Needed to replace thermostat, coolant reservoir, water outlet, both coolant temperature sensors...
  10. Gen1 Service Issues
    Hello all, first post as I am new around here. I have a 2012 Cruze 1.4T with 145K miles on it. I was experiencing a rough idle along with a couple engines codes that popped up. After reading some other posts on here, I determined that my check valve in the intake manifold went bad and caused my...
  11. Gen1 1.4L Turbo
    Hi, first post. I purchased a 2011 eco manual trans car with ~100k early this year to commute in. Over the past 6 months I have put about 10k on with no real problems other than a slight pulsation of torque under load (never really figured that one out). Anyway, last week I got a plethora of...
  12. Cruze Owner Projects
    I have ordered some parts. http://www.mandrel-bends.com/ Ordered the stuff to make a full exhaust. Hope the V-Band size is correct, seems a little odd-ball. Ordered the eibach pro lowering kit. And i'll bypass the bypass and do an intake port all at the same time. If anyone wants pics, just let...
1-12 of 12 Results
Top